Tender For Construction Of Community Sanitary Complex At Masjid Shareef Noor Ul Huda Near Steel Bridge Qaimoh Sector :- Sbm Estimated Cost (Lakhs):- 3.00 Lacs Adv.Cost:- 2.92 Lacs
Tender Value
2.92 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
8 days left
EMD
8769
Bank guarantee accepted
Document Fee
250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Community Sanitary Complex At Masjid Shareef Noor Ul Huda Near Steel Bridge Qaimoh Sector :- Sbm Estimated Cost (Lakhs):- 3.00 Lacs Adv.Cost:- 2.92 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (using hydraullic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cess pits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto1.5m,including getting out excavated earth and disposal of surplus excavated earth within a lead of 50m as directed. All kinds of soil |
| 2 | P/L dry stone solling hand packed in foundation including all charges and plums.and for soak pit. |
| 3 | Providing and laying in position plum cement concrete with 20% plums of size upto 100mm of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), including cost and carriage of materials involved complete job |
| 4 | Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 75 in foundation & plinth in cement mortar 1:6 (1 Cement : 6 coarse sand) including carriage of bricks |
| 5 | Extra for brick work with common burnt clay bricks above plinth level. |
| 6 | Formwork of ordinary timber planks for in situ concrete work and removal of the same. Foundation & Plinth |
| 7 | Formwork of ordinary timber planks for in situ concrete work and removal of the same. In Suspendend Floors |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings,balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 34graded stone aggregate 20 mm nominal size) including carriage of materials |
| 9 | Steel reinforcement for R.C.C. work using TMT bars including straightening, cutting, bending, placing in position and binding all complete |
| 10 | 12 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 mix |
| 11 | Dry random rubble masonry with hard nallah stones in foundation & plinth using Nallah stones incl all carraiges |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles/ floor conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 13 | Providing and applying 1mm thick white cement based putty of specified thicknessof approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. |
| 14 | P/F of mild steel door/window frames and shutters complete job with 35*35*5mm angle iron frame with shutter frame 25*25*5mm fixed with plain sheet.all necessary fittings complete including applying a priming coat complete job.(Doors/Windows). |
| 15 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg / 10sqm) |
| 16 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 17 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid |
| 18 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
| 19 | P/F B class prince PVC pipes 100mm complete job |
| 20 | P/F B class prince PVC pipes 75mm complete job |
| 21 | P/F plain bend 100mm dia pvc of approved make type B |
| 22 | P/F plain bend 75mm dia pvc of approved make type B |
| 23 | P/F Door bend 100mm dia pvc of approved make type B (LMR) |
| 24 | P/F Door bend 75mm dia pvc of approved make type B (LMR) |
| 25 | P/F 100mm dia pvc collar of approved make type B |
| 26 | P/F 75mm dia pvc collar of approved make type B |
| 27 | P/F 100x75 reducer PVC of approved quality |
| 28 | P/F floor traps of self cleansing complete job |
| 29 | P/F PVC cowel over vent pipe of approved quality type B |
| 30 | P/F MS stays and clamps for PVC pipe 75mm |
| 31 | P/F PP-R PIPES 16MM DIA.NOMINAL BORE COMPLETE JOB |
| 32 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 33 | P/F PTMT bib cock of approved quality 15 mm dia of standard brand |
| 34 | P/F gun metal gate valve of approved quality 20mm nominal board |
| 35 | P/F PTMT angle valve of approved quality |
| 36 | Add provision for electric fitting using PVC Channel fittings, 1.50sqmm wire, 3 No. Holders and Saver Bulbs including controlling switches complete job |
| 37 | Add provision for Painting of SBM Logo, Signboard/Photograph Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender