Tender For Construction Of Library Block At Hss Dangiwacha, Zone Dangiwacha
Tender Value
57.10 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
3 days left
EMD
1.14 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Library Block At Hss Dangiwacha, Zone Dangiwacha
BOQ
| Sl. No. | Item Description |
| 1 | Site clearance b/w/o demolishing of existing structure etc. including disposal rubbish upto all leads. Complete Job |
| 2 | Earth work in excavation by mechanical / manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including dewatering (if any), getting out excavated earth and disposal / re-filling of surplus excavated earth as directed up to all leads and lifts. Complete Job |
| 3 | Providing and laying in position dry Nallah soling / Boulder filling with hand packing including carriage by Mechanical Transport / Manual Head Load (if any). Complete job |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:4:8 Mix (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for: (a) Raft, bases of footings, foundation. |
| 6 | (b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc |
| 7 | (c) Suspended floors, roofs, landings, balconies and access platforms, columns |
| 8 | Providing and laying in position Reinforced cement concrete of specified grade including curing but excluding the cost of centering, shuttering and reinforcement. All work upto plinth level with: 1:1.5:3 Mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 Mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 10 | Brickwork with FPS bricks of class designation 75 using 1:4 cement sand mortar in super-structure for Building. |
| 11 | Brickwork with FPS bricks of class designation 75 using 1:4 cement sand mortar in foundation. All works up to plinth level |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | 15 mm thick cement sand plaster in 1:4 mix incl all carriage and cost of material complete. |
| 14 | Providing and laying Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) including carriage (of sand / aggs) and curing complete, but excluding the cost of nosing of steps etc. complete Job. 50 mm thick with 20 mm nominal size stone aggregate. Complete job |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 16 | Wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length, applying wood primer, wood preservatives and paint including cost of hold fasts and other necessities. Complete job. Imported Kail wood |
| 17 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including cost of hinges, tower bolts, handle and necessary nails and screws etc. all complete as per the direction of Engineer-in-charge. Imported Kail wood 30- 32 mm thick |
| 18 | Structural steel work in built-up sections in trusses, purlins, posts etc. including cutting, welding, hoisting and applying red oxide incl. all carriages |
| 19 | Providing / fixing color coated Hi Rib G. S. sheet roofing, plain color coated sheets of 0.50 mm thickness including vertical / curved surface, ridges / valleys fixed with screws / bolts / washers etc. Complete job |
| 20 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 21 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth. Complete job |
| 22 | Providing and applying enamel synthetic paint of approved brand and manufacture on wood work to give an even shade (Two or more coats on new work) including single coat of wood primer. Complete job |
| 23 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked: Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick |
| 24 | P/F glass panes 5 mm thickincl all nails beeding etc compete job |
| 25 | Providing and fixing Ist quality Vitrified floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 600 x 600 mm |
| 26 | Providing and fixing of melamine nordic finished wood panelling in walls and ceilings over 12 mm thick ply including polishing, cornice etc. and all costs and carriages involved |
| 27 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Paanch Murabah |
| 28 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge (Frame work shall be paid for separately). 12mm thick commercial ply conforming to S : 1328 BWR type |
| 29 | Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc, including priming coat complete: Second Class Kail Wood |
| 30 | P/laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), incl. grouting the joint with white cement and matching pigments etc. complete. Size of tile 800x800 mm or 1200 x 600 mm |
| 31 | RR Stone masonry with hard quary stones laid dry including all carriages up to all leads. |
| 32 | Providing and applying water proofing cement paint including surface preparation etc. two or more coats all complete. |
| 33 | French spirit polishing Two or more coats on new works including a coat of wood filler |
| 34 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishingand making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 35 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 36 | Providing and fixing of 75mm / 100 mm Dia. PVC Pipe of standard make including fittings, trench excavation, re-filling (wherever required) and accesssories like tees, elbows, collars, cowls, elbows, collars, etc. all complete. |
| 37 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints.A. PN-16 pipe, above 25 mm OD(SDR-7.4) |
| 38 | B. PN-16 pipe , Above 32 mm OD(SDR-7.4) |
| 39 | Providing and fixing 15 mm nominal bore angle valve for basin mixer, geyser points etc. of Jaquar or equivalent brand all complete. |
| 40 | Providing and fixing 15 mm nominal bore bib tap for water points etc. of Jaquar or equivalent brand all complete. |
| 41 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, |
| 42 | Providing and fixing health faucet of approved quality (Jaquar or equivalent brand) including CP tube up to 1m length. |
| 43 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever equired : ,White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 44 | Providing and fixing Geyser of approved quality (Venus, Racold or equivalent brand) Complete with screws, C.P connections etc. |
| 45 | Providing and fixing water closet squatting pan (Indian type W.C. pan/European as required ) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, health faucet etc. with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. |
| 46 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 47 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 48 | Providing and fixing of 75mm / 100 mm Dia. Door Bend of standard make all complete.a. 75 mm dia |
| 49 | b. 100 mm dia |
| 50 | Providing and fixing ball valve (brass 25 mm) of approved quality, High or lowpressure, with plastic floats complete |
| 51 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia |
| 52 | PVC conduit of 1'' dia and 2mm thick with assorted fitting of bends, tees, saddles, clamps, gutties, screws / Nails etc. (D plast make/Tiger/Universal) |
| 53 | P/f of M.S fan box of standard quality and make. |
| 54 | P/f of round junction box with plate for lightining point. |
| 55 | P/f of Towel rods incld. necessary accessories and all costs/ carriages |
| 56 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 57 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 58 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 59 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work |
| 60 | Providing and fixing in position Al-drop / concealed locks of approved brand and manufacture |
| 61 | p/f in position Al drop/concealed locks of approved brand and manufacture |
| 62 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 63 | Carriage of materialsSand (Av. Lead 20 km) |
| 64 | Aggregates (Av. Lead 20 km) |
| 65 | Stones (Av. Lead 25 km) |
| 66 | Bricks (av. Lead 50 Km) |
| 67 | Cunstructing manhole of 45cm x 45 cm x 45cm for W.Cs of brick masonry, plaster, cement concrete floor and PVC cover all complete |
| 68 | Provision for Foundation Stone including Pedestal/Pelmet etc. all complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender