Tender For Restoration Of Rain Damages To Various Water Supply Schemes In Gps Karian, Janghi, Bhadiya, Jatkari, Under Pdna 2023-24 Under Division Chamba Tehsil & Distt. Chamba Hp.( Sh :-Providing, Laying, Jointing, And Testing Of Gi Pipe(Screwed & So
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jul 2026
5 days left
EMD
1.08 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages To Various Water Supply Schemes In Gps Karian, Janghi, Bhadiya, Jatkari, Under Pdna 2023-24 Under Division Chamba Tehsil & Distt. Chamba Hp.( Sh :-Providing, Laying, Jointing, And Testing Of Gi Pipe(Screwed & Socketed) Of Various Dia. At Various Rds)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited including dewatering in saturated soil and stacking the excavated earth/metarials upto all leads and lifts up to all lifts, not exceeding more than 3.0mtr. clear from the edge of excavation and then returning the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge |
| 2 | Providing Laying, Jointing in trenches galvanized mild steel tubes (LG) IS 1239 (part-I) 2024 ( latest with up to date ammendments) including fittings complete (earth work in trenches to be measured and paid for seperately as per the direction of the Engineer-in-charge with in all leads and lifts of the following nominal bores. The pipe shall be arranged from the manufactures who are holding valid BIS/ ISI/API license. (The make of GI pipe should be Jindal/ Tata/ Surya Roshni and Swastik) |
| 3 | 15mm dia Nominal bore |
| 4 | 20 mm dia Nominal bore |
| 5 | 25 mm dia Nominal bore |
| 6 | 32 mm dia Nominal bore |
| 7 | 40 mm dia Nominal bore |
| 8 | 50 mm dia Nominal bore |
| 9 | 65 mm dia Nominal bore |
| 10 | 80 mm dia Nominal bore |
| 11 | 100 mm dia Nominal bore |
| 12 | 125 mm dia Nominal bore (MG) |
| 13 | Providing and fixing of GI Unions of superior quality ISI marked 1879-2020 latetst with up to date ammendments at various RD's to stop leakage /replacement damaged fitting for improvement of quality/quantity of water etc. complete in all respect within all lead lifts as per the direction of Engineer-in-Charge |
| 14 | Nominal 15mm Dia |
| 15 | Nominal 20mm Dia |
| 16 | Nominal 25mm Dia |
| 17 | Nominal 32mm Dia |
| 18 | Nominal 40mm Dia |
| 19 | Nominal 50mm Dia |
| 20 | Nominal 65mm Dia |
| 21 | Nominal 80mm Dia |
| 22 | Nomina100 mm Dia |
| 23 | Providing and fixing of GI TEE of superior quality ISI marked (1879:2020 latest with up to date ammendments) at various RD's to stop leakage /replacement damaged fitting for improvement of quality/quantity of water etc. complete in all respect within all lead lifts as per the direction of Engineer-in-Charge |
| 24 | GI Tee 15x15mm |
| 25 | GITee 20x20mm |
| 26 | GI Tee 25x25xmm |
| 27 | GI Tee 32x32xmm |
| 28 | Providing and fixing of GI Elbow of superior quality ISI marked (1879:2020 latest with up to date ammendments) at various RD's to stop leakage /replacement damaged fitting for improvement of quality/quantity of water etc. complete in all respect within all lead lifts as per the direction of Engineer-in-Charge |
| 29 | Nominal 15mm Dia |
| 30 | Nominal 20mm Dia |
| 31 | Nominal 25mm Dia |
| 32 | Nominal 32mm Dia |
| 33 | Nominal 40mm Dia |
| 34 | Nominal 50mm Dia |
| 35 | Nominal 65mm Dia |
| 36 | Nominal 80mm Dia |
| 37 | Nomina100 mm Dia |
| 38 | Providing and fixing of GI Reducer of superior quality ISI marked (1879:2020 latest with up to date ammendments) at various RD's to stop leakage /replacement damaged fitting for improvement of quality/quantity of water etc. complete in all respect within all lead lifts as per the direction of Engineer-in-Charge |
| 39 | GI Reducer 20x15mm |
| 40 | GI Reducer 25x20mm |
| 41 | GI Reducer 32x25mm |
| 42 | GI Reducer 40x32mm |
| 43 | Providing and fixing of Globe valve (class-II) of superior quality ISI marked at various RD's to stop leakage /replacement damaged fitting for improvement of quality/quantity of water etc. complete in all respect within all lead lifts as per the direction of Engineer-in-Charge |
| 44 | Nominal 15mm Dia |
| 45 | Nominal 20mm Dia |
| 46 | Nominal 25mm Dia |
| 47 | Nominal 32mm Dia |
| 48 | Nominal 40mm Dia |
| 49 | Nominal 50mm Dia |
| 50 | Providing and Supplying of cast iron sluice valve of following dia of leader/ kirloskar make IS 14846/2000 with stainless steel spindle duly ISI Marked Flanges as per IS: 1538 Class P.N. 1.0 within all leads and lifts as per the direction of Engineer in Charge. |
| 51 | 65 mm dia Nominal bore |
| 52 | 80 mm dia Nominal bore |
| 53 | 100 mm dia Nominal bore |
| 54 | 125 mm dia Nominal bore Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender