Tender For Restoration Of Rain Damages Of Gwss Summa Baggi In Gp Ogli Tehsil Suni Distt. Shimal (Hp) (Sh Construction of Reinforced Cement Concrete Storage Tank 15000 Lts Cap, Construction of Reinforced Cement Concrete Intake Chamber And Providing L
Tender Value
10.45 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
0 days left
EMD
21000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages Of Gwss Summa Baggi In Gp Ogli Tehsil Suni Distt. Shimal (Hp) (Sh Construction of Reinforced Cement Concrete Storage Tank 15000 Lts Cap, Construction of Reinforced Cement Concrete Intake Chamber And Providing L&J Of Gi Pipes Of Various Dia ) )Under Pdna
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Jul-2026 | admistrative reaons | Date | 29-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Descrption |
| 2 | Excavation in foundation trenches etc.in earth work,lift up to 1.50 mtrs,stacking the excavated soil not more than 3 mtrs clear from the as of excavation and then returning the excavated soil in 15 cm layer when ewquired into plinths sodes of foundations etc. concolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 20 mtrs. |
| 3 | For Pipeline |
| 4 | Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in:- |
| 5 | Foundation and Plinth. |
| 6 | Providing and laying cement concrete 1:1½:3 ( 1 cement : 1½ sand : 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in:- |
| 7 | Foundation and Plinth. |
| 8 | Walls (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level. |
| 9 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm so as to give a fair finish i/c centring ,shuttering, strutting and propping etc. with wooden battens & ballies, ht. of propping & centring below supporting floor to ceiling not exceeding 4 mtrs. & removal of the same for insitu-reinforced concrete work in : |
| 10 | Flat surfaces such as soffits and suspended floors, roofs , landing and the like:- |
| 11 | Vertical surfaces such as walls ( any thickness ) partitions and the like including attached pilasters , buttresses, plinth and string courses and the like . |
| 12 | Providing and laying cement concrete 1:2:4 work (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- |
| 13 | Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilever up to floor two levels. |
| 14 | Providing mild steel/tor Steel reinforcement for R.C.C work including bending , binding and placing in position complete up to floor two level. |
| 15 | White washing with lime on undecorated wall surfaces two coats: |
| 16 | Manfacturing MS Manhole Cover 600x450mm with Frame of MS Angle 50x50x6mm and cover of black sheet 2.00mm thick complete with angle frames, flates etc including welding with locking arrangemets(Locks) (excluding Cement Concrete) |
| 17 | Steel work weidedin built up section, trusses and framed work i/c cutting,hoisting,fittingin position complete in grating ,framed guards & ladders etc. (V.M 40x40x5mm &H.M 25x25x4mm |
| 18 | Making of junction point for distribution system of water at Storage Tanks including all fitting and fixing as per drawing etc.with all leads and lifts as per direction and satisfactions of Engineer in charge |
| 19 | Laying and Jointing in trenches, GMS Tubes (Light Grade), Tube fittings (earth work in trenches to be measured and paid for separately). (Scour Pipe) |
| 20 | 20 mm Dia |
| 21 | 25 mm Dia |
| 22 | 32 mm Dia |
| 23 | 40 mm Dia |
| 24 | Providing and fixing Full way wheel valve/GM Gate valve (with hand wheel) as per IS:780 class upto 300 mm (Including brass spindle ans as per IS:2906 class II for diameter more than 300 mm complete with bolts,nuts,rubber insertion etc.(The tail pieces if required shall be meassured and paid for seperartely) |
| 25 | 15 mm Dia. |
| 26 | 20 mm Dia |
| 27 | 25 mm Dia |
| 28 | 32 mm Dia |
| 29 | 40 mm Dia |
| 30 | Providing smooth finishing in cm 1:2 |
| 31 | Providing and fixing GI Union as per ISI Specifications No 1879-1987 (with latest ammendments ) of various dia complete within all leads and lifts as per the direction to the entire satisfaction of the Engineer-in-charge. |
| 32 | 15 mm Dia. |
| 33 | 20 mm Dia |
| 34 | 25 mm Dia |
| 35 | Providing & fixing G.I. Socket of different dia diameter duly ISI marked complete within all leads and lifts as per the direction of the Enginee-in-charge. |
| 36 | 15 mm Dia. |
| 37 | 20 mm Dia |
| 38 | 25 mm Dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender