Tender For Construction Of District Offices Of Ueed (Kashmir Province) (Adv. Cost Of Rs. 484.63 Lacs)
Tender Value
4.84 Crore
Estimated cost
Bid Submission
06 Aug 2026
5 days left
EMD
9.69 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of District Offices Of Ueed (Kashmir Province) (Adv. Cost Of Rs. 484.63 Lacs)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches forfoundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposal of surplus excavated earth as directed, within a lead of 50 metres: (All kinds of soil). |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 3 | Supply & laying of stone soling in horizontal on level including ramming, Watering and dressing (Complete Job). |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 5 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 6 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level |
| 8 | 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Provision for Geotechnical Investigation Report |
| 11 | Provision for Development of Site including platform cutting for levelling of site and disposal of rubbish and thus making site workable as per directions of Engineer-In-Charge (Complete Job). |
| 12 | Centering and shuttering incl. Strutting, propping etc and removal of form work for:- |
| 13 | Foundation, footings, basis of columns etc, mass concrete. |
| 14 | Suspended floors, roofs, landings, balconies and access platform. |
| 15 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 16 | Columns, pillars, piers, abutments, posts and struts. |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level (Thermo-Mechanically Treated bars of grade Fe-500D or more). |
| 18 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. |
| 19 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 above plinth level upto floor five level including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 20 | Extra for brick work with common burnt clay bricks above plinth level. |
| 21 | 12 mm thick cement plaster in 1:6 cement mortar in walls using coarse sand. |
| 22 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 23 | Providing and applying white cement based putty of 2mm thick, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 24 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 25 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 upto plinth level including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 26 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 27 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm). |
| 28 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 29 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade Two or more coats on new work. |
| 30 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of size 600x1200mm as approved by Engineer- in-Charge, in linings of walls skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 31 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete 40mm thick with 20 mm nominal size stone aggregate. |
| 32 | Dry random rubble masonry with nallah stone in foundation and plinth: with Bond stone. |
| 33 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) |
| 34 | Providing and fixing of imported mild density fiberboard laminated prequet flooring of BVG/Action Tesa AC4 8mm or equivalent make of required colour and shade incl. cost of beading, foam and polythene (Complete job). |
| 35 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete |
| 36 | Providing and fixing colour coated Hi-rib sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm thick (Hi-Rib) including ridges, hips, valleys etc all complete. |
| 37 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length incl. hold fast lugs or with dash fasteners (1st class kail wood). |
| 38 | Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) (1st class kail wood). |
| 39 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
| 40 | Float glass panes 4 mm thick glass pane (weighing not less than 10 kg/sqm) |
| 41 | Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (1st class kail wood). |
| 42 | Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge (First class Imported kail wood). |
| 43 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete. |
| 44 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete. |
| 45 | 100mm |
| 46 | 125mm |
| 47 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. |
| 48 | 100x10 mm |
| 49 | 150x10 mm |
| 50 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 51 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 52 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 53 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 54 | Providing fixing of Vitreous china Pedestal of standard pattern for wash basins completely recessed at the back for the reception of pipes and fittings. |
| 55 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510mm bowl depth 200mm. |
| 56 | Providing & fixing PVC Flexible waste Pipe, of 40mm dia. 600mm long for sink or wash basin coupling etc. complete. |
| 57 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass serews and washers complete. |
| 58 | Providing and fixing 600 X 120 X 5 mm glass shelf with edges round of supported on anodised alumunium angle frame with C.P. Brass fittings guard rail complete fixed with 40 mm long screw, rawl plug, etc. Complete. |
| 59 | Towel rail C.P. brass 600 x20 mm together with a pair of C.P. brass brackets to fit the size of towel rail. |
| 60 | Providing and fixing 6 Health Faucet ,6 gysers of standard 25lts make including all fixtures and fittings,6 soap case of standard quality, 42angle valve,7 CP waste coupling.(all of approved brand). |
| 61 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 of approved brand. |
| 62 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe. |
| 63 | 20mm OD(SDR-7.4) |
| 64 | 25mm OD(SDR-7.4) |
| 65 | Providing and fixing ball valve (brass of approved quality complete:20mm nominal bore. |
| 66 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 67 | Providing and fixing PVC pipes of various dia like 75mm, 100mm, 150mm,including PVC fittings laid in required gradient, inclding cost of all fixing accessories complete job as directed by Engineer-In-Charge. |
| 68 | Supply and fixing 150x100mm size square mouth S.W. Gully Trap P type, with C.I. grating, brick masonry chamber, and water tight C.I. cover frame 300x300mm size inside The wt. of cover & frame to be not less than 7.2 kg. |
| 69 | Installation of foundation/inaugration stonefor events on 5'x4' brickwork pedestal with cement concrete foundation and stone/fiber glass frame and naming as per directions of Engineer in charge complete job. |
| 70 | Providing and fixing of retroreflective name board over aluminium frame of size 8'x2.5' with name as per directions of Engineer in charge complete job. |
| 71 | Providing and fixing stainless steel (Grade 304) railing 1000 mm height made of Hollow tubes ,channels, plates etc. including welding, grinding,buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless stell nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size on the top of the floor or the side of waist slab with suitable arrangement As per the Design specification/selection. |
| 72 | Providing and fixing of 100x75mm Top Railing and 50mm Wodden balusters upto 750mm height at 150mm spacing of 1st class kail wood complete as per approved drawing (including cost of all material, leads, lifts and carriages etc upto site of work complete) incl cost of Polish/ Finishing to be approved by Engineer-in-charge (Complete Job). |
| 73 | Provision for Carriage of materials for Five District Office Buildings from source to site of work by mechanical transport incl. Loading, unloading stacking (Complete Job). |
| 74 | Provision for Boundary Wall of the premises for Five District Office Buildings (Complete Job). |
| 75 | Provision for supply,fabricating ,fixing gate with hinges,latch stopper,handle and locking arrangement including applying 1 coat of oxide primer and 2 coats of synthetic enamel paint for Five District Office Buildings (Complete Job). |
| 76 | Provision for supply and laying of manhole cover heavy duty (Complete Job). |
| 77 | Providing and fixing complete internal electrification of District Office including supply, installation, testing and commissioning of all electrical wiring, conduits, switch boxes, modular switches, sockets, distribution board, MCBs, light fittings, ceiling fans, exhaust fans, earthing, main panel connections, and all other accessories required for complete electrification of the building, including labour, testing, commissioning and all incidental works, complete in all respects as per directions of Engineer-In-Charge (Complete Job). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender