Tender For Creation Of 250Kva Distribution Transformer New Substation Along With The Ht And Lt Network For Providing The Power Supply To The Department Of Journalism And Media Studies At New C Us, University Of Jammu.
Tender Value
8.66 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
1 days left
EMD
17332
Bank guarantee accepted
Document Fee
708
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Creation Of 250Kva Distribution Transformer New Substation Along With The Ht And Lt Network For Providing The Power Supply To The Department Of Journalism And Media Studies At New C Us, University Of Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | Part-A (Sanctioned Schedule items) Earthing with following size of earth plate including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.(600X600X6) mm G.I |
| 2 | P/f of strips on surface/in recess for connections as reqd.6 mm SWG G.I wire |
| 3 | Erection of metallic pole of following length in cement concrete 1:3:6 ( 1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and secured with holding clamps, bolts, nuts etc. as required. a. Above 8 meter upto 11 meter. |
| 4 | Erection of ACSR conductor of 7/2.11 mm to 7/3.00 mm diameter including binding etc. as required. |
| 5 | Supply and erection of Stay Set complete(galvanised) with 19/20 mm dia x1.8 meter long stay rod, Anchor plate of size 45 cm x 45 cm x 7.5 mm, thimble, stay clamps, turn buckle (20mmX60mm) 7/3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 1:3:6 (1 cement: 3 corse sand:6 graded stone aggregate 40 mm nomial size) foundation including excavation and refilling etc as reqd. |
| 6 | Non-Schedule Items Supply of swaged type steel tubular pole of following height duly painted with two coats of red oxide and two coats of silver paint made of Mild Steel conforming to IS 2713 part III of 1980 designated as 410 SP 30 HT 9 mtr planted in 1.5 m deep pole pit to be dug for the purpose, welded with (300x300x6) mm base plate at bottom including filling back the pit with cement concrete excavation 1:3:6 (1 cement: 3 corse sand:6 graded stone aggregate 40 mm nomial size) (excluding the cost of CC). The planting depth of the pole shall be 1/6 th 0f pole a) 9 mtr height. |
| 7 | Supply of swaged type steel tubular pole of following height duly painted with two coats of red oxide and two coats of silver paint made of Mild Steel conforming to IS 2713 part III of 1980 designated as 410 SP1 LT 8 mtr planted in 1.5 m deep pole pit to be dug for the purpose, welded with (300x300x6) mm base plate at bottom including filling back the pit with cement concrete excavation 1:3:6 (1 cement: 3 corse sand:6 graded stone aggregate 40 mm nomial size) (excluding the cost of CC). The planting depth of the pole shall be 1/6 th 0f pole a) 8 mtr height. |
| 8 | Providing fixing testing and commissioning of heavy duty 11KV link set. |
| 9 | Providing fixing testing and commissioning of heavy duty 11 KV station type lightening arrestor set of three piece nonlinear resistor, suitable for 3 wire, 11KV overhead lines with rated voltage 9KV (rms) with normal discharge current rating of 5KA complete with G.I clamping arrangement G.I bolts, nuts washers etc as required. |
| 10 | Supply installation testing and commissioning of post type/ Horn gap type 11KV Triple Pole drop out fuse unit fitted with fuse element. (D.O. Set) |
| 11 | Supply and erection of galvanized ‘D’ iron clamps complete with shackle insulator (100 mm x 110 mm), G.I bolts, nuts and washers, coach screws etc. as required. |
| 12 | Supply and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts washers etc as reqd. |
| 13 | Supply installation testing and commissioning of following rating , 250kVA LEVEL-2 11/0.433 KV, three phase, 50 HZ, outdoor type, Dynll, ONAN, copper wound distribution transformer with off load tap changing arrangement on HV side in steps of ± 2.5%, ± 5%, ± 7.5% complete with all accessories viz. Conservator, oil & w earthing studs, name plate and winding connections diagram and Bi-directional rollers etc. The transformer to be designed for an ambient temperature of 45C and winding temperature rise of 50C over ambient. Transformer to be as per IS 2026 Part I to Part V power transformer including first filling of filtered dehydrated transformer oil and conforming to IS 2026 (Part II & 5) of 1977 (Make Bharti/ Electric field/ J.K/Continental)A.250 KVA |
| 14 | Supply, fabrication of following sizes of channels, angles and flat iron including drilling holes for insulators and painting with primer and silver paint.A)Channel (75x40x6)mm |
| 15 | ….do…. Angle (50x50x6)mm |
| 16 | ….do…. Flat iron clamps suitable for LT/HT poles (50x6)mm. |
| 17 | Supply and Fixing of LT fuse Link on the angle iron of 50X50X6mm with Aluminium busbar strip 50X6mm fixes on busbar LT insulator including clamps for fixing of Fuse Link |
| 18 | Supply/laying of following size of 3-core 11 KV graded HT XLPE insulated inner sheath of PVC,Galvanised steel flat strip or round/ Armoured (U.E) cable confirming to IS 7089Part-2.2011 with upto date amendments (Havells/polycab/gloster/General Equivalent make of required specification to be approved by the Engineer In charge)50 sqmm 3 core |
| 19 | Construction of Platform of size 8’-0”x5’-0”x4’-0” (ht) for electric substation with cement concrete 1:4:8 (1cement:4sand :8crushed stone aggregate 20mm nominal size) with 50% stone boulders including cost of formwork, curing, earthwork in excavation(1’-0”)depth, laying of 6” thick layer of cement concrete 1:4:8 in foundation, consolidation, plastering the exposed vertical surface of platform with cement mortar1:4(1 cement:4 sand) P&L of 75 mm thick cement concrete with 1:2:4(1cement:2 sand:4 graded stone aggregate 20mm nominal size) at top of the platform. Note:- Total height of the platform shall be 4”-0” which would include 1’-0” below the ground and 75 mm thick cement concrete laid at top of platform.. |
| 20 | Supply of following size ACSR conductor of required aluminum and steel strands including binding etc. as required as per IS O 398 part 2a) 7/2.11 mm to 7/4mm |
| 21 | Supply,Laying, testing and commissioning of PVC sheathed Aluminum conductor 1100 volts graded PVC AA Armoured/unarmoured XLPE Cable including end termination, crimping, cost of thimbles, nuts bolts, glands, connection, testing and commissioning complete job. (Make: Havells / General/Polycab / Gloster) Equivalent make of required specification to be approved by the Engineer In charge) 300 sq mm armoured cable single core Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender