Tender For Replacement Of Damaged Non-Asbestos Sheets And Corroded Structural Steel Members In Suphala Plant Inside Rcf Factory, Trombay, Chembur , Mumbai -400074.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Aug 2026
15 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Damaged Non-Asbestos Sheets And Corroded Structural Steel Members In Suphala Plant Inside Rcf Factory, Trombay, Chembur , Mumbai -400074.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling steel work in built up sections in angles, tees, flats and channels of rolling shutters, grills, gates, fencing, hoardings, including all gusset plates, bolts, nuts, cutting rivets, welding, m.s. pipes etc and depositing the dismantled scrap at Scrap Yard within RCF Trombay Factory Premises after weighment at RCF weigh bridge . Payment will be made based on weight mentioned on weighment slip . |
| 2 | Removing Existing Mangalore tiles / AC / GI / Galvalume Sheets / polycarbonate plain and corrugated sheets from roof / cladding / partitions etc., excluding supporting structure but including scaffolding, handling, transporting, sorting and stacking within RCF Factory premises etc complete as directed. |
| 3 | Removing Existing Mangalore tiles / AC / GI / Galvalume Sheets / polycarbonate plain and corrugated sheets from roof / cladding / partitions etc., excluding supporting structure but including scaffolding, handling, transporting, disposing within RCF Factory premises etc complete as directed. |
| 4 | Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. (Brand - TATA, SAIL, JSW, RNIL, VIZAG or equivalent to be approved before procurement) Rate including scaffolding whenever required from 0 m to 10 m. |
| 5 | Extra over For height 10 m to 16 m from ground level (5% of item no.4) |
| 6 | Extra over For height 16 m to 26 m from ground level (10% of item no.4) |
| 7 | Extra over For height 26 m to 36 m from ground level (15% of item no.4) |
| 8 | Fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (If equired)(which are to be prepared by Contractor and got approved from Engineer, transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up after erection etc complete as directed by Engineer In Charge. (Theqty. of gusset plates, base plates, bolts shall be measured in M.T.) Structural steel shall be supplied by RCF on non chargeable basis at its store. Paint to be brought by contractor and get approved. Rate including necessary scaffolding. |
| 9 | Providing and fixing at all heights, level and locations profile roofing sheet of material grade SS 304 including profiling, transportation etc complete. The profiles sheets shall be fixed to purline members with SS 304 , 8mm dia sheeting hook of required length with EPDM seal washer over SS 316 washer/stainless steel Self tapping screw of 6x50 mm with SS hex and 3 mm thick EPDM seal washer complete etc all inclusive of labour, scaffolding, T&P and sundries etc complete as per the directions of Engineer-In-Charge. |
| 10 | Providing and fixing 3.00 mm thick UPVC sheet of trapezoidal profile for cladding and roof at any height, including providing and fixing with SS 304 , 8mm dia sheeting hook of required length with EPDM seal washer over SS 304 washer/ stainless steel Self tapping screw of 6x50 mm with SS hex and 3 mm thick EPDM seal washer complete. Sheets shall have uniform pigmentation and thickness without air pockets. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth. UPVC should be plain white at one face and of approved color at the other face. Net area colvered by sheeting will be measured. Laps will not be paid separately etc. complete and as directed. (Net Area covered by sheeting will be measured. Laps will not be paid separately) Up to 10 m level |
| 11 | Extra over For height 10 m to 16 m from ground level (5% of item no.10) |
| 12 | Extra over For height 16 m to 26 m from ground level (10% of item no.10) |
| 13 | Extra over For height 26 m to 36 m from ground level (15% of item no.10) |
| 14 | Providing and fixing in position UV resistant, fire retardant, virtually unbreakable and temperature resistant (-40° C to +130° C) polycarbonate corrugated sheet of 2mm thickness for roof of approved make to match the roof profile at any height with including providing and fixing with SS 304, 8mm hook/ stainless steel Self tapping screw of 6x50 mm with SS 304 hex capand 3 mm thick EPDM seal complete as directed. |
| 15 | Applying first single coat of approved primer andtwo coats epoxy paint/CR paint of an approved make and colour as per manufacturers specifications to structural steel at all height and locations as directed including cleaning, preparing the surface for painting etc. complete as directed by Engineer-in-charge.(Paint shall be supplied by RCF free of cost) |
| 16 | Welding to the old detached steel structural members at any height with cleaning/removing rust, preparing the surface for welding etc. welding with approved welding rod etc complete. complete as directed by Engineer-in-charge.Area of work/location shall got approved before start of the work |
| 17 | Providing and fixing 6 mm thick Non-asbestos high impact Polypropylene reinforced cement corrugated sheet of approved make conforming to IS: 14871-2000 laying the same in position as per the stipulation in IS: 3007- 1991 using 8m dia polymer coated iron L or J hook bolts, galvanized iron & bituminous washers, or self drilling fasteners and EPDM washers, galvanized iron clamps, nuts and bolts etc. complete and as directed up to height of 6.0 m from point of available support. (Net Area covered by sheeting will be measured. Laps will not be paid separately).Overlaps will not be paid separately. Sheets of 'Charminar' of HIL, ' Greencor ' of RAMCO, 'Hi- Tech' of Everest or equivalent shall be used. Ridges will be paid separately. The rate is including 8 dia G.I. Hook bolts and nuts, washers minimum 2 hooks shall be provided to each purlin covered by the sheet. Note: For replacement of up to 10 Nos. of sheets at any location, actual area of sheets will be paid ( Lap will be included). Rate includes scaffolding if required from safety point of view. |
| 18 | Extra over For height 10 m to 16 m from ground level (5% of item no.17) |
| 19 | Extra over For height 16 m to 26 m from ground level (10% of item no.17) |
| 20 | Extra over For height 26 m to 36 m from ground level (15% of item no.17) |
| 21 | Refixing existing material after sorting and cleaning, removed from the existing structure as discribed in Item no. 2/provided by Dept. using 8m dia polymer coated iron L or J hook bolts, galvanized iron & bituminous washers, or self drilling fastners and EPDM washers, galvanized iron clamps, nuts and bolts including sealing the existing holes with suitable material, scaffolding etc. complete and as directed. (if upto ten nos sheets are provided at one location (isolation) actual sheet area will be paid else Net Area covered by sheeting will be measured. Overlaps will not be paid separately) |
| 22 | Extra over For height 10 m to 16 m from ground level (5% of item no.21) |
| 23 | Extra over For height 16 m to 26 m from ground level (10% of item no.21) |
| 24 | Extra over For height 26 m to 36 m from ground level (15% of item no.21) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender