Tender For Providing Direction Notice Boards, Cultural Notice Boards, Protection Notice Boards, Visitors Benches And Temporary Cabins Etc., To Various Monuments Under Kakinada Sub-Circle, Andhra Pradesh
Tender Value
38.90 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
12 days left
EMD
97269
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Godavari → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Direction Notice Boards, Cultural Notice Boards, Protection Notice Boards, Visitors Benches And Temporary Cabins Etc., To Various Monuments Under Kakinada Sub-Circle, Andhra Pradesh
BOQ
| Sl. No. | Item Description |
| 1 | Manufacturing, supply and fixing of Cultural Notice boards in three languages i.e., Telugu, English and Hindi of text engraving over the 2mm thick SS plate of size 0.60X 0.90m fixed on pedestal slab of size 0.60x0.90m with 0.10m thick and with supporting column of size 0.30x0.30m and 1.50m height including cost, conveyance of materials, labour charges, and all other applicable taxes etc., complete as directed by Engineer-in-charge. |
| 2 | Sri Bhimeswara Swamy Temple, Draksharamam, East Godavari District, A.P. |
| 3 | Sri Kumara Rama Bhimeswara Swamy Temple, Samarlakota, East Godavari District, A.P. |
| 4 | Sri Golingeswara Swamy Temple, Biccavolu, East Godavari District, A.P. |
| 5 | Rock-cut caves and cisterns and remains of Buddhist Stupas, Chaityas and Vihara (monasteries) on hill Pandavakonda, Kapavaram, East Godavari District, A.P. |
| 6 | Mounds containing Buddhist remains such as Stupas at Adurru, East Godavari District, A.P. |
| 7 | Manufacture and supply of \\"Vitreous Enamel\\" (All Weather Proof) long lasting porcelain base, ceramic coated \\"Protected Notice Board (PNB)\\" made out of 16-gauge thick CRCA mild steel sheet, support frame of MSA 30x30x4mm and enamelled in blue back ground and white letters with specified matter in Telugu, Hindi & English with ASI 'LOGO' on top left corner, as per approved text. Provided with rust proof galvanized supporting angle stand of size 50x50x6mm, 2.25m long of 1no per board with nut, bolt and washers & welded hold-past at bottom and embedded in cement concrete in 1:4:8 of size 45x45x60cm complete. Size of board: 600mm width x 900mm height including GST and all other applicable taxes etc., complete as directed by Engineer-in-charge. |
| 8 | Sri Bhimeswara Swamy Temple, Draksharamam, East Godavari District, A.P. |
| 9 | Sri Golingeswara Swamy Temple, Biccavolu, East Godavari District, A.P. |
| 10 | Rock-cut caves and cisterns and remains of Buddhist Stupas, Chaityas and Vihara (monasteries) on hill Pandavakonda, Kapavaram, East Godavari District, A.P. |
| 11 | Buddhist Remains on hill top at Kodavali, East District, A.P. |
| 12 | Supply and fixing of location and direction sign boards of Size 1.20mx0.90m, made with Vertical posts 2 nos 65x65x6mm MS L angles of 3m length, Frame 40x40x5mm MS L angles, Board= 4mm ACP Sheet and letters cut and fixed in 2layers of 3M retro high reflective radium sheet (as per approved colour and text) and riveting the board to the frame through SS Rivets, including cost and conveyance of all materials, labour charges, cutting into required sizes, conveyance, Welding, painting to the sign post and frame with two coats of synthetic enamel paint over a primary coat of red oxide, fixing the sign posts in 2nos PCC (1:4:8) blocks of size (0.45x0.45x0.60m) including GST and all other applicable taxes etc., complete as directed by Engineer-in-charge. |
| 13 | Sri Kumara Rama Bhimeswara Swamy Temple, Samarlakota, East Godavari District, A.P. |
| 14 | Rock-cut caves and cisterns and remains of Buddhist Stupas, Chaityas and Vihara (monasteries) on hill Pandavakonda, Kapavaram, East Godavari District, A.P. |
| 15 | Mounds containing Buddhist remains such as Stupas at Adurru, East Godavari District, A.P. |
| 16 | Granite stone benches of size 0.60X0.45x0.15m for legs, 1.50X0.45x0.15m for seat including cost, conveyance of all materials, labour charges, quarrying, cutting in to required sizes, assembling, fixing in position etc., complete as directed by Engineer-in-charge. |
| 17 | Sri Bhimeswara Swamy Temple, Draksharamam. East Godavari District, A.P. |
| 18 | Sri Kumara Rama Bhimeswara Swamy Temple, Samarlakota, East Godavari District, A.P. |
| 19 | Sri Veerabhadra Swamy tempel, Biccavolu, East Godavari District, Andhra Pradesh |
| 20 | ACP rout cut Acrylic backing LED display board of monument name of size 1.80X0.45x0.20m with support of 2nos of 4\\" dia pipe of length 3.20m with foundation including cust, conveyance of all materials, labour charges, assembling, fixing in position etc., complete as directed by Engineer-in-charge. |
| 21 | Sri Bhimeswara Swamy Temple, Draksharamam. East Godavari District, A.P. |
| 22 | Sri Kumara Rama Bhimeswara Swamy Temple, Samarlakota, East Godavari District, A.P. |
| 23 | Sri Golingeswara Swamy Temple, Biccavolu. East Godavari, District, A.P. |
| 24 | Sri Veerabhadra Swamy temple, Biccavolu, East Godavari District, A.P. |
| 25 | Monolithic Ganesa, Biccavolu, East Godavari District, A.P. |
| 26 | Mounds containing Buddhist remains such as Stupas at Adurru, East Godavari District, A.P. |
| 27 | C.I. benches of size 0.60X0.45x0.15m for legs, 1.50X0.45x0.15m for seat and 1.50X0.45x0.15m for back rest including cost, conveyance of all materials, labour charges, quarrying, cutting in to required sizes, assembling, fixing in position etc., complete as directed by Engineer-in-charge. |
| 28 | Rock-cut caves and cisterns and remains of Buddhist Stupas, Chaityas and Vihara (monasteries) on hill Pandavakonda, Kapavaram, East Godavari District, A.P. |
| 29 | Buddhist Remains on hill top at Kodavali, East Godavari District, A.P. |
| 30 | Construction of staff room and baby feeding room with brick masonry including cost and conveyance of all materials, labour charges, GST and all other applicable taxes etc., complete. (Location: Rock-cut caves and cisterns and remains of Buddhist Stupas, Chaityas and Vihara (monasteries) on hill Pandavakonda, Kapavaram), East Godavari District, Andhra Pradesh.) |
| 31 | Earth work in ordinary rock excavation by mechanical means (Hydraulic excavator)/manual (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, complete as directed by Engineer-in-charge. |
| 32 | Laying of PCC (1:4:8) (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) including cost of materials, labour and conveyance charges etc., complete as directed by Engineer-in-charge. |
| 33 | Construction of Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete (1:6:12) (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar (1:6) (1 cement: 6 coarse sand) including cost of materials, labour and conveyance charges etc., complete as directed by Engineer-in-charge. |
| 34 | Supply and filling in plinth with sand under floors, including watering, ramming, consolidating dressing including cost of materials, labour and conveyance charges etc., complete as directed by and Engineer-in-charge. |
| 35 | Construction of Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes including cost of materials and labour charges etc., complete as directed by and Engineer-in-charge. |
| 36 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with (1:1.5:3) (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) including cost of materials and labour charges etc., complete as directed by and Engineer-in-charge. |
| 37 | Centering and shuttering including strutting, propping etc. and removal of form for roof including cost of materials and Labour charges etc., complete as directed by and Engineer-in-charge. |
| 38 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level etc., complete as directed by and Engineer-in-charge. |
| 39 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster (1:5) (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster (1:3) (1 cement: 3 coarse sand) finished rough with sponge, including cost of materials and labour charges etc., complete as directed by and Engineer-in-charge. |
| 40 | Colour washing such as green, blue or buff to give an even shade for new work (two or more coats) with a base coat of white washing with lime including cost of materials and labour charges etc., complete as directed by and Engineer-in-charge. |
| 41 | Fixing factory made UPVC white colour fixed glazed windows ventilators comprising of UPVC multi chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60+ 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, the Window Sash should be fitted with Smm thick Floated glass, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant. Two track two panels sliding window with Aluminum channel for roller track, wool pile, nylon rollers with SS 304 body etc., complete as directed by and Engineer-in-charge. |
| 42 | Fixing factory made UPVC white colour fixed glazed Doors comprising of UPVC multi chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60+ 0.2 mm thick galvanized mild steel section made from roll forming process of required length(shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, G.I fasteners100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of, wool pile, nylon rollers with SS 304 body etc., complete as directed by and Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender