Tender For Schedule Of Rates For Composite Work Of Mother Station At Mangaldoi For City Gas Distribution Project Of Negdcl Assam
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Aug 2026
18 days left
EMD
10.23 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Guwahati → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Schedule Of Rates For Composite Work Of Mother Station At Mangaldoi For City Gas Distribution Project Of Negdcl Assam
BOQ
| Sl. No. | Item Description |
| 1 | GA 11.03 ASSAM (MANGALDOI) |
| 2 | SECTION-A : WORKS FOR Mother Station |
| 3 | FABRICATION, ERECTION, INSTALLATION AND TESTING OF PIPING |
| 4 | Receiving and taking over of all Owner supplied materials 2\\" and above valves from Owner's designated place(s) of issue, transportation including loading, unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s) / work site(s) / work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials (except those specified subsequently in SOR), equipment, consumables as defined in Contractor's scope of supply and their transportation to the work site(s); performing all above ground/buried piping fabrication works including cutting, edge preparation (inclusive of grinding the edges of pipes, fittings, flanges etc. to match with the matching edges of uneven / different thickness wherever required), fit up, bending, pre-heating wherever required, welding, threading etc.; erection of pipes of all types and thickness over sleepers, overhead on racks and at all elevations; hook-up with equipment nozzles; all types of inline and online instruments such as pressure / thermal safety valves (other than those covered separately), fittings of all sizes i.e., elbows, reducers, tees, 'o' lets, flanges, blind flanges, spectacle blinds, tapping's for pressure gauges, thermowells, hoses and hose couplings of all sizes, if applicable, vents and drains required for process and hydrotesting purposes etc. including fixing of all types of gaskets (including gaskets for RTJ flanges), bolts, studs and nuts of all sizes; carrying out non-destructive testing (excluding radiography covered subsequently in SOR) such as magnetic particle/ liquid penetration etc. as required; hook-up with existing piping / pipeline installed by others as per drawings wherever required; cleaning and flushing by water / compressed air, carrying out hydrostatic test, pneumatic test, valve functional test and any other type of testing as specified, de-pressurising, dewatering, drying by compressed air if applicable; cutting / rebeveling (as required), pre-commissioning and providing commissioning assistance to Commissioning Contractor / Agency for process piping and commissioning of non-process piping if applicable; clean-up and restoration of site, preparation of as built drawings, documents and project records; transportation of surplus free issue materials to Owner's designated place(s); completing all works in all respects as per the AFC drawings, specifications, standards and other provisions of Contract and instruction of Engineer-in-Charge.Note :-a) Installation of equipment shall be done by bidder as per directions, supervision and guidance of equipment manufacturer Engineer. Bidder shall inform at least 15 days before to owner for mobilizing of Vendor Engineer to site. Commissioning shall be done in presence & guidance of equipment manufacturer Engineer.b) All butt welded fittings end shall generally match with connecting pipe wall thickness. However, in case of misalignment, contractor shall have to do end preparation accordingly without any extra cost.c) All couplings, nipples, plugs for nipple etc. as required shall be supplied by contractor without any extra cost.d) All Gaskets & Nut-Bolts of adequate quantity shall be supplied and installed without any extra cost.e) All items fittings, flanges, valves, pipes below 2\\" shall be supplied & installed by the contractor under this item, Contractor to quote accordingly.f). 2\\" and above (fittings & flanges etc ), material supply is also in the contractor scope. It shall be be paid separately under relevant SOR item on actual basis.g) Any branch connection taken from mainline shall be considered under this SOR item only.No extra cost shall be paid for the above items. |
| 5 | Installation of above ground Carbon Steel Process Piping as per details given below: |
| 6 | Size-4 Inch, 300# Thk/Sch-XS, Material-ASTM A106 Gr B (CHARPY), BE, Seamless,Dimension Std.-B 36.10 |
| 7 | Size-2 Inch, 300# Thk/Sch-XS, Material-ASTM A106 Gr B (CHARPY), BE, Seamless,Dimension Std.-B 36.10 |
| 8 | Size-2 Inch, 150# Thk/Sch-XS, Material-ASTM A333 Gr 6, BE, Seamless,Dimension Std.-B 36.10 |
| 9 | INSTALLATION OF VALVES |
| 10 | Receiving and taking over of all Owner supplied materials, equipment's 2\\" and above valves from Owner's designated place(s) of issue, loading , unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s)/ work site(s)/ work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials, equipment, consumables as defined in Contractor's scope of supply and its transportation to the work site(s);installation of valves, flow meters, strainers, equipment's including fixing of gaskets, bolts, studs, nuts wherever required, levelling, aligning, installation and assembly of accessories including accessories for actuators including making electrical connections for such actuators, if any, by bolting/ threading or welding of pipes at all elevations, testing, completing all works in all respects as per drawings, specification, other provisions of Contract and directions of the Engineer-in-Charge.Note:a.) All items fittings, flanges, valves, pipes below 2\\" shall be supplied & installed by the contractor under this item, Contractor to quote accordingly. b.) All bolts, nuts, gaskets of all size shall be supplied & installed by the contractor under this item, Contractor to quote accordingly. c.) Contractor works includes all work including tie in with exisitng terminal inside Station and with pipeline |
| 11 | Installation, Calibration and Commissioning of Above Ground Butt Weld Ends DGAV Ball Valves, DGAV Actuator & Normal Ball Valve (BW) as per Standard Specification, Data Sheets, P & IDs as per details given below: |
| 12 | Installation of above ground Flanged Valves (Ball / Plug / Check / Gate / Globe) as per details given below: |
| 13 | Size-4 Inch, Rating-300# |
| 14 | Size-2 Inch, Rating-300# |
| 15 | Installation of above ground Butt Welded Valves (Ball / Plug / Check / Gate / Globe) as per details given below: |
| 16 | Size-4 Inch, |
| 17 | Size-2 Inch, Rating-300# |
| 18 | Installation of Insulating Joint as per details given below: |
| 19 | Size-4 Inch, 300#, Thk/Sch-6.4, Material-ASTM A694 F52 |
| 20 | Supply including procurement and transportation to worksite(s)/workshop(s) including loading, unloading and handling for the following materials to be supplied by Contractor as per the requirement of PMS, specifications, data-sheets, standards, instructions of Owner/ Engineer-in-Charge and other provisions of Contract. |
| 21 | FLANGES |
| 22 | Supply of Weld Neck Raised Face (WNRF) Flanges as per details below: |
| 23 | Size-4 Inch, 300#, Thk/Sch-XS, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5 |
| 24 | Size-4 Inch, 300#, Thk/Sch-XS, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5,with JS Holes |
| 25 | Size-2 Inch, 300#, Thk/Sch-XS, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5 |
| 26 | Size-2 Inch, 300#, Thk/Sch-XS, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5,with JS Holes |
| 27 | Size-2 Inch, 150#, Thk/Sch-XS, Material-ASTM A350 GR.LF2, Face/Finish-150, RF/125AARH, Dimension Std.-ASME B16.5 |
| 28 | Supply of Blind Flanges as per details below: |
| 29 | Size-4 Inch, 300#, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5 |
| 30 | Size-2 Inch, 300#, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5 |
| 31 | Supply of Spacer and Blind /Fig 8/ Spectacle Blinds per details given below: |
| 32 | Size-4 Inch, 300#, Material-ASTM A105 (CHARPY), Face/Finish-300, FF/125AARH, Dimension Std.-ASME B16.48 |
| 33 | Size-2 Inch, 300#, Material-ASTM A105 (CHARPY), Face/Finish-300, FF/125AARH, Dimension Std.-ASME B16.48 |
| 34 | FITTINGS |
| 35 | Supply of R=1.5D, 90° BW Elbow as per details given below: |
| 36 | Size-4 Inch, Thk/Sch-XS, Material-ASTM A234 Gr.WPB, (CHARPY), Dimension Std.-ASME B 16.9 |
| 37 | Size-2 Inch, Thk/Sch-XS, Material-ASTM A234 Gr.WPB, (CHARPY), Dimension Std.-ASME B 16.9 |
| 38 | Supply of R=1.5D, 45° BW Elbow as per details given below: |
| 39 | Size-4 Inch, Thk/Sch-XS, Material-ASTM A234 Gr.WPB, (CHARPY), Dimension Std.-ASME B 16.9 |
| 40 | Size-2 Inch, Thk/Sch-XS, Material-ASTM A234 Gr.WPB, (CHARPY), Dimension Std.-ASME B 16.9 |
| 41 | Supply of BW ReducingTee/Equal Tee as per details given below: |
| 42 | Size-4 Inch x 4 Inch Thk/Sch- XS x XS , Material - ASTM A 234 Gr. WPB, (CHARPY) Dimension Std.-ASME B 16.9 300# |
| 43 | Size-4 Inch x 2 Inch, Thk/Sch-XS x XS , , Material - ASTM A 234 Gr. WPB, (CHARPY) Dimension Std.-ASME B 16.9 300# |
| 44 | Size-2 Inch x 2 Inch Thk/Sch- XS x XS , Material - ASTM A 234 Gr. WPB, (CHARPY) Dimension Std.-ASME B 16.9 300# |
| 45 | Supply of Sockolet as per details given below: |
| 46 | Size-4 Inch X 3/4 Inch, 6000#, Material-ASTM A105, Dimension Std.-MSS-SP 97, SW |
| 47 | Size-2 Inch X 3/4 Inch, 6000#, Material-ASTM A105, Dimension Std.-MSS-SP 97, SW |
| 48 | Supply & Installation of Reducer |
| 49 | Size-4 Inch x 2 Inch Thk/Sch- XS , Material - ASTM A 234 Gr. WPB, (CHARPY) Dimension Std.-ASME B 16.9 300# |
| 50 | Size-6 Inch x 4 Inch Thk/Sch- 80 , Material - ASTM A 234 Gr. WPB, (CHARPY) Dimension Std.-ASME B 16.9 300# |
| 51 | Supply of Insulating Joint as per Material Requisition and attached Data Sheet with Station Work Tender.Pup piece material :-connecting pipe material (THK. Match with connecting pipe) |
| 52 | Size-4Inch, 300#, Thk/Sch-6.4, Material-ASTM A694 F52 |
| 53 | Supply of Piping as per details given below: |
| 54 | Size-4 Inch, 300# Thk/Sch-XS, Material-ASTM A106 Gr B (CHARPY), BE, Seamless,Dimension Std.-B 36.10 |
| 55 | Size-2 Inch, 300# Thk/Sch-XS, Material-ASTM A106 Gr B (CHARPY), BE, Seamless,Dimension Std.-B 36.10 |
| 56 | Size-2 Inch, 150# Thk/Sch-XS, Material-ASTM A333 Gr 6, BE, Seamless,Dimension Std.-B 36.10 |
| 57 | RADIOGRAPHY: |
| 58 | Performance of radiographic inspection of piping of all types, sizes, thickness including providing or hiring of all necessary equipment, supply of all consumables including radiographic films and whatever else even though not expressly mentioned but required to perform the work as per specification and instructions of Engineer-in-Charge. Contractor to submit DPR, Inspection Report along with Radiography Report to Engineer-in-Charge.Note :a) All NDT including Radiography, MPT, LPT for below 2\\" are covered under this SOR item. No separate payment shall be made.Radiography of piping joints as per details given below: |
| 59 | Size-6 Inch |
| 60 | Size-4 Inch |
| 61 | Size-2 Inch |
| 62 | PIPE SUPPORTS |
| 63 | Supply, fabrication and erection of pipe/ equipment supports (for all sizes/ thickness) including shoes, pipes etc. as required, cradles, turn buckles, T-posts for all types of guides, anchors, special supports for cold/hot insulated pipes etc. if applicable, all necessary equipment, consumables, labour etc. for completing all works including supply of bolts, nuts, washers, U-clamps, wooden blocks etc. as required for supporting, supply and application of paints and primers suitable for normal corrosive painting environment as defined in contract document and as per standard specification for painting specification no. VPC-SS-PI-0008, Drawings, Specification, Standards, other provisions of Contract and instruction of Engineer-in-Charge. |
| 64 | MS Structural Steel |
| 65 | PAINTING |
| 66 | Supply of paints, solvents and primers, preparation of surfaces and application of primer and finish paints suitable for normal corrosive painting environment as defined in contract document and on pipes as per standard specification for painting specification no. VPC-SS-PI-0008, identification, lettering/ numbering, colour coding etc. as specified including rub down and touch up of shop primer or scrapping of shop primer wherever required and providing of scaffolding for all heights, labour, materials, tools and tackles, consumables, supervision etc. to complete the work in all respect as per Specification, Drawings, Standards and instruction of Engineer-in-Charge.Note : a) All painting work for sizes below2\\" are covered under this SOR item. No separate payment shall be made. |
| 67 | Painting of all above ground piping including all fittings, valves, flanges etc. and including colour bands |
| 68 | Size-4 Inch, Painting Environment-Corrosive Normal Environment (Above Ground) |
| 69 | Size-2 Inch, Painting Environment-Corrosive Normal Environment (Above Ground) |
| 70 | PIPING LEAKS / BURSTS (ATTRIBUTABLE TO OWNER) |
| 71 | All works for leak/burst (occurring during hydrostatic testing) including necessary repair/replacement of defective pipe length, including cutting and removing out defective pipes, welding, NDT of welds, repair and re-testing of defective welds, painting of welded joints, clean-up, re hydro testing of the pipe segment including providing all necessary equipment's, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, specifications enclosed with the Contract and directions of Engineer-in- Charge.Note:a) This rate shall be applicable for manufacturing defects in Company supplied materials only. |
| 72 | SUPPLY OF RAIN CAP |
| 73 | Supply and Installation of Rain Cap including all necessary fabrication works, including providing all necessary equipment's, labour, materials, consumables and inputs other than Owner supplied materials and performing all works as per drawings, data sheet, specifications enclosed with the Contract and directions of Engineer-in-Charge. |
| 74 | 4\\" Rain Cap for Vent, 15HLT |
| 75 | Nitrogen Supply |
| 76 | Supply of Nitrogen with cylinder for localized purging, Hook up of pipeline and piping. |
| 77 | INSTALLATION OF MECHANICAL EQUIPMENTS |
| 78 | Transportation & installation of all equipments (Static & Rotary) along with all accessories supplied by supplier etc. from owner's storage point / designated location to work site including loading and unloading, erection of all static / rotary equipments including layout marking at site, fabrication and installation of shims including cutting and grinding, installation and levelling of base plates, assembly of sub-assemblies, bolting, fitting of all interconnected piping items (supplied by equipment supplier), shifting and reconfiguration of spreader beams, installation of rigging apparatus for erection crane, alignment of equipment at all elevations as per drawings, removal, placing and shifting of stools and saddles including loading and unloading, installation of all mountings and accessories, all enabling work as required, and completing the work in all respects as per drawings, specification, codes and instruction of Engineer-in-Charge.Note:a) Actual rate shall be paid to contractor based on actual weight of items. |
| 79 | DRS Unit |
| 80 | CNG Cascades (3000 WL capapcity) + Ground Level |
| 81 | CNG Dispenser at + Ground Level |
| 82 | LCV Unloading Postassembly,testing as well as installation, testing and commissioning of LCV Unloading post consisting of 3/4\\" NRV - 5000 PSI |
| 83 | Transportation of Mechanical EquipmentsReceiving and taking over\\" of \\"free issue\\" Compressor (1200 SCMH etc...) etc. from NEGDCL Store Yard location to Contractor Store yard/working site/material required location; Carrying out inspection of free issue item at the time of receiving and repair defects attributable to Company; including supply of materials, consumables & equipments; handling, hauling and transportation from designated place of issue to Contractor Storage Yard; unloading a at Contractor Storage Yard; including arranging all equipments, trailers, trucks & manpower; all works as per Scope of Work, drawings, PTS, GTS and other provisions of the Contract and instructions of Owner/ Owner's Representative; all associated works not indicated herein but required to complete the work as per Scope of Work, Provision of Contract & instructions of NEGDCL/VCS. |
| 84 | SINAGE BOARDS |
| 85 | Supply and installation of Aluminum composite panel board all support structural/fixtures at all heights painted with two coats of first quality synthetic enamel paint over two coats of Zinc phosphate primer of approved make, concrete grouting in 1:2:4, wherever required complete in all aspects as per following specifications, size, shape and as directed by In-Charge.Board Material : Aluminum composite panel ( Alucobond, Alpolic, Renybond 3mm/ 0.3 mm thick PVDF coated French Blue No. 166 (IS -5)Lettering : 3M vinyl 3630 seriesBorder : L pipe, Aluminum ; Powder coatedLaminate : 3M 8519 series laminate filmNote: The matter/drawing to be printed shall be provided in soft form as Doc/ PDF/Dwg file. Conversion required if any for making the files printable shall be in vendor's scope. |
| 86 | SLOGAN PAINTING |
| 87 | Painting of slogans/ boards/ lettering on plastered wall/ MS boards, AC sheets etc. at heights as indicated below as directed at site. Rate to include for all scaffolding, staging, supply and providing of required colour 1st quality synthetic enamel paint for the letters as well as the back ground. Paint area measured once shall be considered for payment purpose.(Visual Identity designs as per Visual Identity manual) at all heights |
| 88 | POLIHED GRANITE FACIA |
| 89 | Providing and laying mirror polished Black granite 20mm thk over Front wall including engraving NEGDCL Logo and lettering using stainless steel letters. Each granite facia shall be minimum 3.2 sq. mt. (2 by 1.6 m approx.). |
| 90 | INTERNAL SIGNAGE BOARDS |
| 91 | Supply and Installation of Mandatory Signs made of 3mm ACM Sheet and Printed on ECO Vinyl Sheet 300x100 mm. Detail specification as given in Tender |
| 92 | Supply, Installation, commissioning of Eye/Face wash and safety shower with Pedal, made of Galvanized Iron material as instructed by Engineer-in- Charge. |
| 93 | SECTION-B : SS TUBE SUPPLY,LAYING & TESTING |
| 94 | Supply, Laying, testing & commissioning of SS Tubes, SS Fittings & SS Valve as per technical specification, typical P&ID, drawing, scope of work including SS tube installation, hydrotest at site & as per instruction of Engineer in charge.. Laying Including with Clamps & Supports as per instruction of Engineer in charge |
| 95 | SS Tubes |
| 96 | ¾”OD X 0.095” min Wall thk.,Material SS316 SS Tube |
| 97 | ½”OD X 0.083” min Wall thk.,Material SS316 SS Tube |
| 98 | Conductive Core Thermoplastic Hose |
| 99 | QRC 1/2\\" NPTS, 1/2” ID Conductive Core Thermoplastic Hose for CNG Service with break away coupling Min 5 meter length including connector for 1/2 '' 3 way ball valve (Make-Parker) |
| 100 | Size : ¾\\" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 101 | Size : ½\\" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 102 | Size : ¾\\" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 103 | Size : ½\\" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 104 | Union |
| 105 | Size : ¾” OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 106 | Size : ½\\" OD, Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 107 | Reducing Union |
| 108 | Tube OD 3/4\\" x Tube OD 1/2\\", Material : SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 109 | Equal Tee |
| 110 | Size:¾\\" OD x ¾\\" OD x ¾\\" OD, Material : SS316 ( Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 111 | Size:½” OD x ½” OD x ½” OD, Material:SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 112 | Reducing Union Tee |
| 113 | ¾\\" OD x ½\\" OD x ¾\\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 114 | Tube End Connection |
| 115 | ½” Tube End & ¾” OD with Ferrule Fitting, SS316 (Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 116 | Front Ferrule |
| 117 | 3/4\\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 118 | ½\\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 119 | Back Ferrule |
| 120 | 3/4\\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 121 | ½\\" OD, Material : SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 122 | Male Connector |
| 123 | Size ¼” NPT (M) x 3/8” OD, SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 124 | Size 1/2” NPT (M) x 3/8” OD, SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 125 | Size 1/2” NPT (M) x 3/4” OD, SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 126 | SS Ball Valves |
| 127 | 2-Way Trunioun Normal Bore Ball Valve ¾\\"(Rated pressure : 6000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 128 | 2-Way Trunioun Normal Bore Ball Valve ½\\"(Rated pressure : 6000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 129 | 3-Way Trunnion Mounted, Reducer Bore Ball Valve ½\\" OD end Connection and ¼” NPT (F) bottom end connection(Rated pressure : 6000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 130 | Supply, erection & commissioning of following miscellaneous items as per technical specification and at locations (within the stations) as directed by EIC |
| 131 | SS Nut Ferrule |
| 132 | SS Nut 3/4\\" OD SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 133 | SS Nut 1/2” OD SS316(Rated pressure : 5000 PSI @ 70°F Temperature : 0°F to 400°F) |
| 134 | Fire fighting Equipments |
| 135 | 75 kg capacity DCP type (trolley mounted) |
| 136 | 9 kg capacity DCP fire extinguisher |
| 137 | 4.5 kg capacity CO2 fire extinguisher |
| 138 | Sand Bucket stand (4 Nos. on each strand) |
| 139 | Supply and installation of mandatory signs made of 3 mm ACM sheet and printed on ECO Vinyle sheet |
| 140 | 450X300 MM |
| 141 | 600X600 MM |
| 142 | 750X300 MM |
| 143 | Wind Sock |
| 144 | SECTION-B : Civil Works |
| 145 | Earth work in ExcavationEarth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth upto 3.0m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete,including shoring and strutting. |
| 146 | upto 1.5m depth |
| 147 | 1.5m to 3.0m depth |
| 148 | IMPORTED EARTH FILLINGEarth work in filling with good quality imported earth from approved source in the layers of 200 mm and compacted up to 95% to its MDD and any plan dimension including all testing, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing / filling up ground depressions etc. complete in all respect as per scope of work, detailed construction drawings , as per technical specifications and directions of the Engineer-in-charge. |
| 149 | BACKFILLINGEarth filling from available earth (excluding rock) under floors and other places with special compaction to achieve dry density of 95% standard proctor density with excavated surplus earth including cost of reclaiming from spoil heaps within plant site as per instruction of the Consultant at all heights/depths, transporting, depositing, compacting and dressing, trimming complete as desired in layers not exceeding 20 cms including watering, consolidating by mechanical means as per specifications and instructions of the Consultant. |
| 150 | SURPLUS EARTH TRANSPORTATIONTransporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial lead of 100M including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids)i) Upto 1.0Km. |
| 151 | SAND FILLINGSupplying and filling in foundation and plinth with river/ M-sand under floors for all leads and lifts, including watering, ramming, consolidating and dressing complete. |
| 152 | Anti-Termite TreatmentProviding and injecting chemical emlusions for pre-construction anti-termite treatement and creating continious chemical barrier under and all round the column pits, wall trenches, excavation top surface of plinth filling, junction, external perimeter of buildings, expamsion joins surrounding of pipes and conduit etc. complete. (plinth area of the building at ground level shall only be measured) with chlorpyriphos/Lindance E.C. 20% with 1% concentration.Work to be executed by approved agency and specified guarantee for 07 years shall be furnished by the tenderer. |
| 153 | DAMP-PROOF COURSE (DPC)Providing and laying damp proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggreate 20mm nominal size) including providing and mixing of water proofing compound @ 2% of cement content and providing and applying two layers of bitumen of grade 80/100 of approved quality using 1.7 kg/ sqm on damp proof course after cleaning the surface with brushes and finally with a piece of cloth likely soaked in kerosene oil complete and as directed by the Project Manager. |
| 154 | STONE PITCHINGProviding and laying of 225mm thick Dry Rubble Pitching (Stone Pitching) under foundations, PCC or wherever required as per direction of Engineer-In-Charge and drawings including hand packing, filling the interstices with chips, spalls and binding with grit, watering, compaction by hand ramming etc. complete in all respect all completed along with associated works as per approved drawing, Technical specification and direction of Engineer-In-Charge.(Boulders of size 100mm to 150mm size shall be provided) |
| 155 | PCC & RCC WORKS |
| 156 | P.C.C Providing and laying in position ready mixed plain cement concrete below foundation,& flooring, trenching and mass concrete,coping etc including shuttering, curing with all leads and lifts as per direction of the Engineer - in - charge. |
| 157 | PCC 1:2:4 (1 Cement: 2 Coarse sand: 4 Stone aggregate 20mm nominal size) M15 |
| 158 | PCC 1:3:6 (1 Cement: 3 Coarse sand: 6 Stone aggregate 20mm nominal size) M10 |
| 159 | PCC 1:4:8 (1 Cement: 4 Coarse sand: 8 Stone aggregate 40mm nominal size) M7.5 |
| 160 | RCC Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work in super structure such as coloums, beams, walls, etc cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads and at all levels, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of reinforcement, including cost of centering, shuttering finishing upto pavement/ and plinth level (except suspended floors,roofs etc) and admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. |
| 161 | For all works upto plinth level |
| 162 | For all works above plinth level upto floor v level |
| 163 | RCC drain/trench coverProviding and fixing 75 mm thick M-25 factory made RCC drain/trench cover including cost of shuttering and minimum reinforement@ 8mm dia TMT Fe-500 bars @100mm c/c bothway. The RCC cover shall be encased with 100mm wide 1.6mm thick MS sheet alongwith 2 nos 12mm dia bar for hook etc complete including painting of MS sheet . |
| 164 | RCC drain/trench coverProviding and fixing 100mm thick M-25 factory made RCC drain/trench cover including cost of shuttering and minimum reinforement@ 8mm dia TMT Fe-500 bars @100mm c/c bothway in two layers. The RCC cover shall be encased with 100mm wide 1.6mm thick MS sheet alongwith 2 nos 12mm dia bar for hook etc complete including painting of MS sheet . |
| 165 | PLINTH PROTECTIONMaking plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources/M-sand : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth |
| 166 | REINFORCEMENT Supply and placing in position Steel reinforcement TMT grade Fe415/Fe500 for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels. Item also include the provision of necessary chairs and spacer and cost of binding wire etc complete. The chairs and spacer bars provided will not be measured for payment. |
| 167 | Thermo-Mechanically Treated bars/ Hot rolled deformed bars |
| 168 | STRUCTURAL STEEL-S,F &ESupplying, transporting, Storing, Fabricating in position and testing/Examining bolted and/or welded STRUCTURAL STEEL WORKS at all levels and locations including all builtup sections/compound sections made out of rolled sections and/or plates/bent plates in trusses, purlins, wind ties, wind girders, columns, portals, racks, frameworks, crane gantries, surge girders, bracings, floor beams, lifting beams, monorails, platforms, staircases (excluding chequered plates and gratings), ladders, stoppers, brackets, side runners, sagrods, supports for equipment and technological accesories and process piping, hand railings, posts, conveyor galleries, trestles, towers, masts, junction houses etc., cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/welding of joints, (including sealing the joints of box sections with continuous welding), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified, including preparation and submission of detailed fabrication drawings, preparing the surface for painting and Including applying shop primer & Epoxy paint as per specification, wherever applicable) after fabrication etc. all complete. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE. (Including Finish Painting). |
| 169 | GI GratingSupplying, fabricating and erecting in position at all levels and locations galvanised grating of 25 mm thick (purchased from approved manufacturer by the Contractor) as cover for storm water drain,LCV Platforms etc. including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fixing with manufacturer's supplied galvanised clamps, preparation and submission of fabrication drawings, all complete as specified and directions of Engineer-in-Charge. Supply of all materials and providing labour, tools and tackles are in contractor’s scope. |
| 170 | CENTERING AND SHUTTERINGProviding and fixing CENTERING AND SHUTTERING in foundations, footings, raft beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses, trenches, equipment/machine foundations, pedestals, abutments, pipe sleepers, columns, plinth beams, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/bunkers/silos/ shafts/ hoppers/liquid storage structures etc. including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed. |
| 171 | i) For all depths below and upto & inclusive of plinth level. |
| 172 | ii) For all heights above plinth level. |
| 173 | PLASTERING WORK |
| 174 | EXTERNAL PLASTERINGExternal WallsPlain cement plaster with waterproofing compound conforming to IS-2645 (CICO/ approved equivalent) mixed to cement mortar @ 3% by weight, Average 18mm thick 1:4 (1 cement : 4 sand) (ALL MATERIALS INCLUDING CEMENT, SCAFFOLDING (upto all Depth & Height) SUPPLIED BY CONTRACTOR AT THEIR COST).Note:- Rates Includes necessary scaffolding, curing, making grooves, patta etc. complete in all levels, at all depths and heights & all shapes. |
| 175 | INTERNAL PLASTER-12 MMInternal WallsOrdinary plain cement plaster Average 12mm thick 1:4 (1 cement : 4 sand). (ALL MATERIALS INCLUDING CEMENT, SCAFFOLDING (upto all Depth & Height) SUPPLIED BY CONTRACTOR AT THEIR COST).Note:- Rates Includes necessary scaffolding, curing, making grooves, patta etc. complete in all levels, at all depths and heights & all shapes. |
| 176 | CEILING PLASTER-6 MMCeilingOrdinary plain cement plaster Average 6mm thick 1:4 (1 cement : 4 sand). (ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR AT THEIR COST).Note:-Rates Includes necessary scaffolding, curing, making grooves, patta etc. complete in all levels, at all depths and heights & all shapes. |
| 177 | PAINTING WORK |
| 178 | Painting of Internal walls:-Providing & applying 2 coats of waterproof decorative cement paint of approved make and approved shade, cleaning, including preparation of surfaces,base primer, curing etc. all complete. |
| 179 | Painting of External walls:-Providing & applying 3 coats of waterproof decorative cement paint of approved make and approved shade, cleaning, including preparation of surfaces,base primer, curing etc. all complete. |
| 180 | WALL PUTTYProviding and applying wallcare Putty on plastered surfaces on internal walls for smooth and dry surface essential for painting, after removing all loosely adhering material from the wall surface. The substrate should be clean, free from dust, grease and loose materials. Dry and absorbent surfaces should be moistened with sufficient quantity of clean water. Apply the first coat on already moistened wall surface from bottom to upward direction uniformly. After drying of first coat of putty just rub the surface gently with west sponge or rub the surface very gently with the putty blade in order to remove the loose particles. Allow the surface to dry for atleast 3 hours and then apply second coat of putty. Leave the surface to dry completely. After drying of second coat remove marks if any with the help of moist sponge or rub the surface very gently with the putty blade. Leave the surface to dry preferably for overnight.The total thickness of the coats should be limited to maximum 1.5mm. Note:- Rates including providing necessary double scaffolding and surface preparation, thoroughly wetting surface and complete with curing. Rate to be applicable for all heights and levels. |
| 181 | TILED FALSE CEILINGProviding and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sq.m., both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross 'T' of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main 'T' at 600 mm center to center to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia. and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised butterfly level clips of size 85x30x0.8 mm spaced at 1200 mm center to center along main 'T', bottom exposed width of 24 mm of all 'T'-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by the Engineer-in-Charge : |
| 182 | FENCING |
| 183 | Providing and fixing concertina coil fencing with punched tape concertina coil 600mm dia 10metre openable length(total length 90m) having 50 nos. rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in-charge with reinforced barbed tape (RBT)/ Spring core (2.5mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/metre. (cost of M.S. angle, C.C.blocks shall be paid separately) |
| 184 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-In-charge. The cost of structural steel and PCC shall be paid separately. |
| 185 | Made of G.I. wire of dia 3.1 mm min |
| 186 | BARBED WIRE FENCINGSupplying, fixing and tensioning in position 2.5mm(12gauge), 2 ply, 4 points, GI Barbed wire designation A-1 conforming to IS:278 in horizontal rows and cross diagonals for compound wall \\"Y\\" shaped overhang etc. with necessary GI staples, clips and pins, GI straining bolts and binding wire with all labour and materials etc. complete as per drawings, specifications and directions of Engineer-in-Charge.(The barbed wire shall be measured in linear length of the barbed wire actually fixed). |
| 187 | Y ANGLESupplying, fabricating and fixing in position structural steel line posts, straining posts, struts including 'Y' shaped overhang for barbed wire fencing conforming to IS:2062, cutting to required size as per drawings and specifications, welding where necessary, embedding in position, holding to correct level and line, any auxiliary structure for dummy supports, drilling holes and painting as per painting specification attached with tender , cutting brick/rubble/concrete surfaces if necessary, grouting with 1:3 cement mortar with all labour, materials including cost of grout etc. complete as per drawings, specifications and directions of Engineer-in-Charge. (All materials including cement shall be supplied by contractor.) |
| 188 | PAVER BLOCKS Flooring |
| 189 | PAVER BLOCK-M40 80 MM THICKSupplying and placing in position as per approved pattern of Cement Concrete Inter locking paver block 80 mm thick of approved shape, rough finish, M-40 strength of approved brand laid over the sand bed of minimum 50 mm thick. The CC interlocking blocks to be of uniform Grey colour or as approved by EIC complete in all respects , as per technical specifications and directions of the Engineer-in-charge. Note :-1.Rate to include cost of all labour, tools, tackles, equipment, hire charges, supply of all materials such paver blocks, sand, earth work in excavation in cutting earth in all conditions, shuttering with all bye works and sundry works.2.To be read in conjunction with Particular Specification3.Supply of all materials and providing labour, tools and tackles are in contractor’s scope. |
| 190 | Providing and laying Hand Packed Rubble Cut Stone Soling of size 90 to 63mm in flooring / driveway duly consolidated. approved quality, as close as possible, hand packing with stone chippings to fill the voids, laying murrum, hand ramming, watering, well consolidating complete as per specifications, drawings and instructions including preparation of bed and dressing the same to proper level etc complete. |
| 191 | Providing and laying Hand Packed Rubble Cut Stone Soling of size 63 to 45mm in flooring / driveway duly consolidated. approved quality, as close as possible, hand packing with stone chippings to fill the voids, laying murrum, hand ramming, watering, well consolidating complete as per specifications, drawings and instructions including preparation of bed and dressing the same to proper level etc complete. |
| 192 | KERB STONE FIXINGProviding and fixing precast concrete Kerb stones (125 wide X 300 deep) of M-30 grade or equivalent of approved make and shape at or near ground level as per approved pattern and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) including the cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) wherever required over 75 mm thick PCC 1:4:8 levelling course, complete in all respects as per scope of work, detailed construction drawings, technical specifications and directions of the Engineer-In-Charge. Note:- 1. Rate to include all labour, tools, tackles, factory manufactured & steam cured Kerb Stones, shuttering, transportation, water charges, earth work if any, PCC etc complete . |
| 193 | GROUTINGProviding and laying manually at all positions a ready mix non-shrink cementitious grout of minimum compressive strength of 45 N/mm2 for specified works e.g. base grouting of rotating equipment and other installation complete in all respects as per scope of work, detailed construction drawings, technical specifications and directions of the Engineer-In-Charge. |
| 194 | PERCOLATION PITConstructing Percolation Pit of size 3 m dia. And 2 m deep, filled with 40mm size brick ballast including providing suitable precast RCC cover with lifting lugs, laying of 150mm dia. X 5m long UPVC pipe embedded in pit/outlet pipe all complete as per specification and direction of the EIC. Detail specification as given in the tender document.Note:- Including Boring. |
| 195 | Weep HolesProviding and fixing of U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 75 mm dia in weep holes. |
| 196 | Concrete PavementProviding and laying Reinforced cement concrete with 20mm and down size graded crushed stone aggregates in flooring, pavements etc. including leaving pockets, if necessary, making recess/drains, laying in alternate panels, etc. for all depths including shuttering, tamping, curing, etc. as specified in any shape, thickness, position and finishing the top surface smooth etc. all complete as per drawings, specifications and directions of Engineer-in-Charge (excluding cost of providing and fixing reinforcement & joint sealing). For RCC of M-25 grade concrete(all materials including cement shall be supplied by contractor) |
| 197 | Water Bound MacadamSupplying and laying of stone aggregate of 63mm down to 45mm size for WBM layer Base Course, tough, sound, clean and durable including cost of stone aggregate, all royalties, taxes, handling, transportation to site, unloading the same by the side of road with all leads and lifts, spreading and laying to form water bound macadam in one layer of 150mm compacted thickness to proper grade, camber and level, filling voids with screenings and binding material of plasticity index up to 6%, including cost of supply of screening and binding material, consolidating with power driven road roller, watering, with all leads and lifts etc. complete as per drawings, specifications and directions of Engineer-in-Charge. |
| 198 | Sealing Compound |
| 199 | Providing 20mm wide EXPANSION JOINTS in flooring and pavement slabs and ISOLATION JOINTS around equipment foundations/columns/pedestal/trenches etc. including cleaning the joints of all loose material, filling clean sand for the full depth of slab (upto and inclusive of 300 mm) except for 12mm depth from top and sealing the top 12mm with approved two part liquid polysulphide Sealing Compound as per IS:12118 etc. all complete as shown, specified and directed. |
| 200 | Supplying and fixing in position 25mm thick BITUMEN IMPREGNATED FIBRE BOARD conforming to IS:1838 of approved quality in expansion joints at all locations and levels in concrete structures etc. all complete as shown, specified and directed. |
| 201 | GrassingGrassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). |
| 202 | Cement BlocksProviding and laying cement blocks (solid blocks) masonry mix ratio 1:1.5:3 with 200 mm thick blocks upto plinth level and super structure above plinth level up to top level of building in cement mortar 1:4 (1 cement : 4 coarse sand ). |
| 203 | Upto Plinth level |
| 204 | Upto floor V level |
| 205 | Brick MasonryBrick work with bricks of class designation 5.0 with Mortar 1:6 (1Cement: 6 Coarse sand) in all levels. |
| 206 | FLOOR FINISHING |
| 207 | VITRIFIED TILESProviding and laying Vitrified tile flooring of size 600mm x 600mm of approved make (Marbonate or approved equivalent) set in cement slurry over 1:4 cement mortar bed of 35mm average thickness at all levels. Joints between tiling to be filled with grout of approved shade as per manufacturers specifications. Rate to include cost for laying tiles to approved pattern, design as directed by Architect, including surface cleaning, cement mortar, curing, acid wash, etc., and protecting the flooring with polythene sheet and pop overlay till hand over. Please Enable Macros to View BoQ information |
| 208 | VITRIFIED TILESProviding and laying Vitrified tile flooring of size 600mm x 600mm of approved make (Marbonate or approved equivalent) set in cement slurry over 1:4 cement mortar bed of 35mm average thickness at all levels. Joints between tiling to be filled with grout of approved shade as per manufacturers specifications. Rate to include cost for laying tiles to approved pattern, design as directed by Architect, including surface cleaning, cement mortar, curing, acid wash, etc., and protecting the flooring with polythene sheet and pop overlay till hand over. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender