Tender For Construction Of Anganwadi Building At Orattukuppai Elementry School Premises In Chettipalayam Town Panchayat
Tender Value
16.50 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
4 days left
EMD
16500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Anganwadi Building At Orattukuppai Elementry School Premises In Chettipalayam Town Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Earth work exception for foundation in all solids and sub-solids to full depth as may be directed except in hard rock requiring blasting but inclusive shoring, structing and baling out water wherever necessary and filling the sides offoundation with excavated earth in layer of not more than 15cm thick well rammed and consolidated and depositing the surplus earth in all places shown by the department officers with initial lead and lifts etc. including leaving the sites complete complying with standard specifications etc complete. |
| 2 | Providing Plain Cement concrete of mix 1:4:8 (One cement Four sandeightaggregates) using 40mm ISS gauge size hard broken including cost conveyance of all materisl to site including labour charges, transporting and placing in postion including labour for mixing compacting, finishing and curring etc. including cost and conveyance of all materials and labour charges etc., complete as per standard specification |
| 3 | Random rubble masonry in cement mortar 1:5 for foundation and basement using new stones including necessary provision for bond stones with simultaneous flush pointing with the same mortar above ground level complying with standard specifications. |
| 4 | Refilling in basement with excavated earth in layers of not more than 15cm thick well rammed and consolidated etc.,complete |
| 5 | Fly Ash Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best Fly Ash Brick of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications |
| 6 | Upto Basement |
| 7 | Superstructure |
| 8 | Collection, supply and filling with well gravel including cost and conveyance of all materials and stacking them at road side to departmental gauge for pre-measurement including all labour charges for filling etc., complete as per standardspecification. |
| 9 | Supplying and erecting in the position of centering for sides and soffits including Necessary supports and strutting upto 3.00 m high for plain surfaces with all cross bracings using mild steel sheet of 90 mm x 60 cm and or suitable size stiffened with welded-mild steel angle of size 2mmx25mmx3 mm for boarding laid over silver oax (country wood) joists of size 10 x cm x 6.5 cm spaced at about 90 cm centre to centre and supported by casurina props 10 mm to 13 cm dia spaced at about 75 cm center to center etc. complete complying with standard specifications and as directed thedepartmental officers. |
| 10 | For Grade Beam |
| 11 | For Coloumn |
| 12 | For Slab |
| 13 | Supplying, Fabricating and placing in position mild steel or deformed steel bars for all reinforced cement concrete items of work including cost of steel transporting straightening cutting, bending, cranking binding welding etc.Including cost of binding wire MS.chairs laps to fix the reinforcement in all positions, all labour and materials complete complying with standard specifications and drawings and as directed by the departmental Engineers |
| 14 | Reinforced cement concrete 1:1.5:3 (One cement one point five sand and three hard broken stone) using 20mm guagebroken hard granite stone jelly for all RCC, items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including curing cost and conveyance of all materials to the site and all labour charges formixing and providing fixture like fan clamps in the RCC floor or roof slabs wherever necessary as directed by the departmental officers etc., complete complying with standard specification. |
| 15 | Upto Basement |
| 16 | Superstructure |
| 17 | Weathering course concrete using best quality broken jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) over the RCC roof slab in the proportion of brick jelly to lime being 32:12.5 by volume and laid over in asingle layer and consolidated to the required design and finished thickness, beating the concrete stantly wetted by sprinking lime jaggery water as per standard specification etc., complete as directed by the departmental officers |
| 18 | Finishing the top of roof one course of machine pressed tiles of size 20cm x 20x2cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound confirming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, red oxide, etc., compete complying with standard specification. |
| 19 | Finishing the exposed surface of RCC item of work such as slabs beams sunshade panja canopy slab staircase waist slab leading slab etc., with cement mortar 1:3 (one cement and three sand) 10mm thick including baking the surface. The rate is too include the cost of providing the cement mortar beading of nosing for sunshades and staircase stepsboulding slabs etc complete complying with standard specification |
| 20 | Plastering with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors including curing etc., complete complying with standard specification and as directed |
| 21 | Supply and fixing of cuddapah slab 50 mm thick including cost and conveyance of all labour charges etc |
| 22 | Floor finishing with fully vitified tilles using best quality of fully vitified tiles of size 60cm x 60cm x 6mm over the base plastering cement mortar 1:3 mix, 20mm thick pointing with using white cement 4kg/10sq.mt. inculing cost andconveyance of all materials and all labour charges. Etc. complete. |
| 23 | Dadooing of walls with colour glazed tiles of size 300x200x6 mm finished thickness with c.m 1:2- and polished with same color cement including all cost and convene of all materials etc.,complete |
| 24 | Plastering with cement mortar 1:5 (one cement and five sand) 20mm thick in all floors including curing etc., complete complying with standard specification and as directed |
| 25 | Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and asdirected by the department officers etc., Complete complying with standard specifications. |
| 26 | Painting two coat for new iron works ushing best synthetic enamal paint of approved branded quality of paint over existing primer coat, etc., complete complying with standard specification (The paint should be got approved by the departmental officers before use on works). |
| 27 | Supplying and fixing of M.S.grill of approved design for doors. Windows and ventilators using necessary mild steel flats for inner and outermembers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete Complying with standard specifications. |
| 28 | Supply and fixing of RCC Jolly including cost and conveyance of all materials to work site and labour charges etc., complete charges etc., complete. |
| 29 | Painting two coats over Block Board Paint with best approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete complying with standard specifications and as directed by the |
| 30 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soilpipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and asdirected by the departmental officers. |
| 31 | Supply and fixing of 15A Aerial Fuse Unit (500A) on suitable 100 x 100 mm T W Concealed box with hylem sheet on the tapping pole with necessary clamps (SD-128). |
| 32 | Supply and fixing of 4 way sp of DB of 16 A / way with 32 A DP Switch with metal clad of 500 V with F and N (side Handle) on suitable T.W. board with Earth connection (S.D. No. 156) |
| 33 | Supply and run of 2 of 1.5 sq.mm (22/0.3) PVC Insulated SC unsheathed Cu. Conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD.64) |
| 34 | Supply and run of 2 x 1.5 Sq.mm (22/.3) PVC Insulated SC unsheathed CU. Conductor of 1100 Grade in 25mm Dia GI Pipe (Glass “B”) suitably Bent of both ends with necessary angle iron upright and end supports for Mains (SD 69). |
| 35 | Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting SD 87 |
| 36 | Supply and fixing of WT bulk head fitting with guard (Philips /Bajaj / Crompton / K. Lite) suitable for incandescent lamp with 60 W bulb (SD.84) |
| 37 | Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TW switch box and 5 A.F.T. switch in flush withwall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) (SD. 24). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender