Tender For Completion Of Community Bhawan At Sidhbari Construction of Kitchen & Additional Room For Community Bhawan At Sidhbari In Ward No. 17 (Balance Work)
Tender Value
7.69 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
3 days left
EMD
15400
Bank guarantee accepted
Document Fee
413
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Completion Of Community Bhawan At Sidhbari Construction of Kitchen & Additional Room For Community Bhawan At Sidhbari In Ward No. 17 (Balance Work)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulicexcavator)/ manual means in foundation trenches ordrains (not exceeding 1.5m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, liftupto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within alead of 50 m. Ordinary rock as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 gradedstone aggregate 40 mm nominal size) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge |
| 3 | Random rubble masonry with hard stone insuperstructure above plinth level and upto floor fivelevel, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge |
| 4 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement – All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge |
| 6 | Centering and shuttering including strutting, proppingetc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge |
| 7 | Centering and shuttering including strutting, proppingetc. and removal of form for :Suspended floors, roofs, landings, balconiesand access platform as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge |
| 8 | Brick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarsesand) 2nd class brick as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge |
| 9 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge |
| 10 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge |
| 11 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters Second class teak wood as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge |
| 12 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge |
| 13 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge |
| 14 | Boulder filling in plinth tiglity hand packed with hard stone as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge |
| 15 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 500x500 mm as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge |
| 16 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender