Tender For Repair And Maintenance To B/R Works Of Sports Facilities And Infrastructure At Hq Cif (K) Under Age (I) Cif (K)
Tender Value
10 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
18 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance To B/R Works Of Sports Facilities And Infrastructure At Hq Cif (K) Under Age (I) Cif (K)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete un reinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | M&L for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in floor as sub base concrete, complete all as specified. |
| 3 | M&L for 60mm thick machine pressed precast concrete interlocking paver blocks of any size and shape, factory casted, laid and jointed with grey cement and pigment and conforming to IS 15658-2006 of M-35 Grade and joints filled etc complete all as specified and directed. |
| 4 | M&L 20mm thick sand filling for sand cushioning to interlocking tiles, under floors or in foundations including watering and consolidation complete all as specified. |
| 5 | M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed by the Engineer-in-Charge. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises. |
| 7 | M&L for Vitrified Ceramic tiles (Light shade/ Double charged/ Ultra charged) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42sqm but not exceeding 1 sqm, as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 15mm thick screed bed in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge.Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account. |
| 8 | M&L for Vitrified Ceramic tiles (Light shade/ Double charged/ Ultra charged) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36sqm not exceeding 0.42 sqm, as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 15mm thick screed bed in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge.Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account. |
| 9 | M&L for Vitrified Ceramic tiles (Light shade/ Double charged/ Ultra charged) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36sqm not exceeding 0.42 sqm, as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 10mm thick cement plaster/ rendering in cement mortar 1:4, complete all as specified and as directed by the Engineer-in-Charge.Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account. |
| 10 | M&L for 20 mm thick, Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms/vertical wall clading etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 10mm thick rendering (bedding layer/backing coat) on brick/concrete surface in cement mortar 1:4 etc., complete all as specified and directed by Engineer-in-Charge. |
| 11 | Rounding/moulding to edges of Kota stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed by the Engineer-in-Charge. |
| 12 | M&L for Chequered cement concrete tiles of size 20 cm x 20 cm x 25 mm/ 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors, paths etc, with grey cement and pigment, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 13 | M&L for Plain cement concrete, 1:2:4, type B-1 using 20mm graded crushed stone aggregate, 25mm thick, as in levelling course of flooring, complete all as specified and as directed by the Engineer-in-Charge. |
| 14 | Taking down cement plastering on stone wall/brick wall etc including racking out of joints hacking for key scrubbing down with water etc. |
| 15 | Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge. |
| 16 | M&L for Brick work with sub class `B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed by the Engineer-in-Charge. |
| 17 | M&L 15mm thick rendering on fair faces of wall in CM 1:4 on brick/concrete surface and finishing the surface even and smooth with out using extra cement. |
| 18 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 19 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 20 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridges, fixed with self tapping screws, complete all as specified and directed. |
| 21 | Dismantling false ceiling, boarding as in partition wall, screen wall of any description, fixed in any position with nails, complete all as specified and directed by the Engineer-in-Charge. |
| 22 | S&F GI frame work size of grid 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofit at approx 900 mm centre to centre with GI cleat and steel expansion fasterner with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips acress the intermediate channel at 457mm centre to cnetre including hangers 6mm dia.GI (upto 1200mm length) adjusting level fixed tp roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm ling and expansion hold fasterner 12.5mm dia 40mm long including S&F 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/ Aluminium frame work, complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F 2nd class soft wood boarding, 15mm thick, as in wall panelling, plain one side and edges tongued and grooved or rebated, fixed with nails in any situation including french polishing on surface of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coat upto satification of Engr-In-Charge. |
| 24 | S&F 10mm thick toughened glass as in hinged door, partition, automatic doors and similar work including cutting shape, drilling holes, grinding/polishing and rounding off edges of glass, including providing and fixing door handle , hinges, hydraulic foundation of ISI marked, logo/hallmark and other fixing arrangment required etc, complete all specified and directed by Engr-In-Charge. |
| 25 | S&F Anodised aluminium frame (powder coated minimum thickness of powder coating 50 micron) for doors, windows, partition wall with one or more rebates including joining cleat for fixing, rubber packing, anodised aluminium snap on beading for fixing glass panes in frame etc complete all as specified and directed. |
| 26 | S&F Anodised aluminium (powder coated minimum thickness of powder coating 50 micron) door shutters, powder coated of any colour aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, anodised aluminum snap beading screws etc., complete all as specified and directed by the Engineer-in-Charge. |
| 27 | M&L 4mm thick aluminium composite sheet with decorative colour and fixed with screw or aluminium beading to aluminium frame complete all as specified and as directed by the Engineer-in-Charge. |
| 28 | S&F plain sheet glass, 4 mm thick, selected quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed by the Engineer-in-Charge. |
| 29 | Note :- An amount of Rs. Rs 12,780.00 on account of credit schedule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender