Tender For miscellaneous Steel Structure Work In Heep
Tender Value
8.24 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
6 days left
EMD
16488
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for miscellaneous Steel Structure Work In Heep
BOQ
| Sl. No. | Item Description |
| 1 | Carriage of materials by mechanical transport including loading, unloading and stacking: Steel:2 km Unit:tonne( S.l.No. : 1.1.5.2) Page No.: 63 |
| 2 | Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil:All kinds of soil. Unit:cum( S.l.No. : 2.8.1) Page No.: 69 |
| 3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distanceof 50 m outside the periphery of the area cleared.of 50 m outside the periphery of the area cleared. Unit:100 sqm( S.l.No. : 2.32) Page No.: 72 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Unit:cumCEMENT SHALL BE ISSUED FREE OF COST AT BHEL STORES,( S.l.No. : 4.5.2) Page No.: 75 - (Sl No. 4.5.2) Page No.: |
| 5 | Centring and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases of Columns Unit:sqm( S.l.No. : 4.9.1) Page No.: 76 |
| 6 | Fixing standard steel glazed doors, windows and ventilators in walls with 15x3mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including fixing of glass panes with glazing clips and special metal-sash putty of approved make, or metal beading with screws (only steel windows with lugs, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost.) Unit:sqm( S.l.No. : 10.11) Page No.: 120 |
| 7 | Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.as required. :In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works. Unit:kilogramSTRUCTURAL STEEL SHALL BE ISSUED FREE BY BHEL.( S.l.No. : 10.32.2) Page No.: 123 - (Sl No. Code 1007) Page No.: 27 |
| 8 | 12 mm cement plaster of mix : :1:4 (1 cement : 4 coarse sand) Unit:sqmCEMENT SHALL BE ISSUED FREE OF COST AT BHEL STORES,( S.l.No. : 13.11.2) Page No.: 147 - (Sl No. 13.1) Page No.: 286 |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : :Two or more coats on new work Unit:sqm( S.l.No. : 13.93.1) Page No.: 155 |
| 10 | Renewing glass panes, with putty and nails wherever necessary: :Glass panes weighing 13.75 kg/sqm Unit:sqm( S.l.No. : 14.5.3) Page No.: 157 |
| 11 | Demolishing cement concrete including disposal of material within 50 metres lead : :1:3:6 or richer mix Unit:cum( S.l.No. : 15.2.1) Page No.: 167 |
| 12 | Demolishing : R.C.C. work including stacking: of steel\\" bars and disposal of unserviceable \\"material within 50 metres lead: Unit:cum( S.l.No. : 15.3) Page No.: 167 |
| 13 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. Unit:kg.( S.l.No. : 15.18) Page No.: 168 |
| 14 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: :G.S. Sheet Unit:sqm( S.l.No. : 15.28.1) Page No.: 169 |
| 15 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: :Asbestos sheet Unit:sqm( S.l.No. : 15.28.2) Page No.: 169 |
| 16 | Fabrication of various steel structural frame work, Gate posts, ladders, chequred platforms z-type ladders, trusses, col. crane girders, iron mesh(jali) partitions etc. including cutting, drilling, welding of steel members, providing and fixing of bolts & nuts whenever required, complete with one coat of primer paint. (Welding electrodes, gases, power-supply, raw steel, MS pipe etc. will be issued at BHEL stores free of cost).(Bolts, nuts and primer paint to be arranged by the contractor) |
| 17 | Erection of fabricated materials including assembling, alignment, cutting, welding, drilling, bolts, nuts, washers etc. and cartage upto erection sites (welding transformer, electrodes, gases, power supply will be issued at BHEL stores free of cost). |
| 18 | Fabrication and fixing M.S. Grills, railing or like of required pattern in wooden frames or grouted in cement concrete with M.S. Bolts, square or round bars or angles etc. including all nuts, bolts or screws priming coat etc. complete including cartage at site of work.(Welding electrodes, gas, electricity will be supplied free of cost by the department. |
| 19 | Dismantling RCC / CC floor or foundation for making pockets of size 300mm X 300mm, 300 mm deep, disposal of debris to a designated area within 1 km lead and then providing and laying cement concrete in these pockets of foundations grouting work and flooring as per direction with ordinary cement in M- 20/ M-15 grade with 10mm nominal size stone screening / chipping, coarse sand and cement as per requirement including all material & T&P required for proper completion of the work. (only ordinary cement will be supplied by the deptt. free of cost from the store) |
| 20 | FIXING OF AVAILABLE PROFILED GALVALUME SHEETING AND FLASHING IN ROOFS/CLADDING FOR ALL HIGHT AS REQUIRED BY MEANS OF GALVANIZED SELF DRILLING SELF TAPPIING FASTENERS (12-14X55 WITH EPDM SEALS) AT RECOMMENDED SPACINGS FOR ALL HEIGHTS IN WORKSHOPS AND BUILDINGS INCLUDING ALL REPAIR/RECTIFICATION(CLOSING OF HOLES ETC.) REQUIRED WHEREVER AND CARTAGE OF ALL SHEETS TO SITE PROVIDED FREE OF COST AT DESIGNATED STORE COMPLETE AS PER DIRECTION OF ENGINEER IN CHARGE. |
| 21 | Supply and Fixing of profiled sheeting 1000-1020 mm cover width, 28 -30 mm high 5 to 6 crests manufactured out of hi-tensile BARE Aluminium zinc alloy coated high tensile steel sheet (AZ-150 gsm. Aluminium –Zinc alloy metallic coating of total both sides 550 Mpa yield stress). The minimum Basic Material Thickness (BMT) should be 0.47 mm and TCT should be 0.50 mm . The sheet shall have wide pans with required nos. of small stiffening ribs for effective water shedding and special male/female ends with full return legs on side laps for purlin support. The male end of the sheet shall have anti-capillary flute at side laps to prevent leakages. The sheet shall be fixed by means of Galvanised selfdrilling self-tapping fasteners (12-14x55 with EPDM seals). The sheet shall be supplied in lengths maximum upto 6-12 Mtrs long to suit site dimensions. |
| 22 | PAINTING OF VARIOUS STEEL STRUCTURE (LIKE-TRUSS,COLUMN, PURLINS, CLADDING, BUILTUP SECTION ETC.) AFTER CLEANING & SMOOTHENING THE SURFACE WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND & MANUFACTURE OF REQUIRED COLOUR TO GIVE AN EVEN SHADE AS PER DIRECTION OF ENGINEER IN CHARGE.TWO OR MORE COATS. |
| 23 | Lettering on the Mild Steel / concrete / wood / flax board surface with synthetic enamel paint of approved brand and manufacture. The board would be painted to give an even and smooth finish of uniform shade. After painting the base coat lettering should be done of uniform size and texture as directed by engineer incharge. |
| 24 | PROVIDING REINFORCED BY ORGANIC FIBRES AND/OR INORGANIC SYNTHETIC FIBRES CEMENT 6 MM THICK CORRUGATED SHEETS (AS PER IS: 14871) ROOFING UP TO ANY PITCH AND FIXING WITH POLYMER COATED J, OR L HOOKS, BOLTS AND NUTS 8 MM DIA.G.I. PLAIN AND BITUMEN WASHERS OR WITH SELF DRILLING FASTENER AND EPDM WASHERS ETC. COMPLETE (EXCLUDING THE COST OF PURLINS, RAFTERS AND TRUSSES), INCLUDING CUTTING SHEETS TO SIZE AND SHAPE WHEREVER REQUIRED. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender