Tender For 1) Construction Of Mini Sanittary Complex @ Vannathikuttai Head Of West Rajapalayam Panchayat In P.N.Palayam At Salem District
Tender Value
3.50 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
9 days left
EMD
3500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 1) Construction Of Mini Sanittary Complex @ Vannathikuttai Head Of West Rajapalayam Panchayat In P.N.Palayam At Salem District
BOQ
| Sl. No. | Item Description |
| 1 | 1) Construction of mini Sanittary Complex @ Vannathikuttai H/O West Rajapalayam |
| 2 | Earth work excavation and depositing on bank with in initial lead lift in hard gravelly soil for foundation etc. complete. Foundation |
| 3 | Earth work excavation and depositing on bank with in initial lead lift in hard gravelly soil for foundation etc. complete. |
| 4 | Plain Cement concrete 1:4:8 mix using 40mm ISS metal including all cost and conveyance of all materials to site and all labour charges etc complete. |
| 5 | Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc. ,complete complying with standard specification. |
| 6 | Supplying and errecting centering are strutting including necessary supports for place surface for RCC columns footing pedestal beam criticals pears etc.,using mild steel angles of sizes 90 x 90 x 10 cm gauge stifness welded mild steel of sizes 25 x 25 x 3 cm for boarding laying over silver oak joists of single 10cm - 6.5cm space of 75cm ceter to center. Plinth Beam |
| 7 | Supplying and errecting centering are strutting including necessary supports for place surface for RCC columns footing pedestal beam criticals pears etc.,using mild steel angles of sizes 90 x 90 x 10 cm gauge stifness welded mild steel of sizes 25 x 25 x 3 cm for boarding laying over silver oak joists of single 10cm - 6.5cm space of 75cm ceter to center. |
| 8 | Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete |
| 9 | Supplying and Fabrication of steel for RCC works including all cost of cutting bending and tying of steels and kept ready for concrete in position etc., |
| 10 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work |
| 11 | Plastering with cement 1:5-12mm thick including cost and conveyance of al materials to site and all labour charges etc complete. |
| 12 | Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 13 | Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick |
| 14 | Dadooing walls Plain Galzed tiles of size 150x150x6mm |
| 15 | Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. |
| 16 | Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc., complete as per standard specification. |
| 17 | Cost and supply of IWC |
| 18 | Cost and supply of EWC |
| 19 | Cost and supply of Wood plastic Door D1 0.75 m x 1.80m |
| 20 | Cost and supply of Wood plastic Door D1 1.20 m x 2.10m |
| 21 | Cost, Supply and fixing of Precast RCC Ring, including all cost and labour charges etc |
| 22 | RCC Ring |
| 23 | Round Slab |
| 24 | 110 mm dia pvc pipe |
| 25 | 110mm PVC Door Bend |
| 26 | 110mm PVC TEE |
| 27 | 1000 lit HDPE tank |
| 28 | Supply and fixing of RCC jollies of size 0.60 x 0.45m for individual toilet blocks inclusive of all charges for cost of materials etc complete |
| 29 | Towards internal water supply arrangements (taps for toilet unit) and Electrification |
| 30 | 25mm PVC Pipes 10KSC |
| 31 | 25mm PVC TEE |
| 32 | 25mm PVC Elbow |
| 33 | 25mm PVC Ball Valvu |
| 34 | 25mm PVC TEE |
| 35 | 25mmX20mm Reducer PVC |
| 36 | 20mm PVC Pipes 10KSC |
| 37 | 20mm PVC MTA |
| 38 | 20mm PVC FTA |
| 39 | PVC Tap |
| 40 | Clamp |
| 41 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender