Heavy Industries and Public Enterprises Government Departments Closing in 2 days TDR #56491677

Tender For Providing And Fixing Solar Pump Construction Of One Room Pumping Out Of Water Pond To Gull Main Road And Ambedkar Road. Interlocking Tiles Work In Village-Sabotta Mustafabad, Yea Wc-06

Issued by Government Departments · lucknow, Uttar Pradesh
Tender Value
33.71 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
2 days left
EMD
67500
Bank guarantee accepted
Document Fee
930
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Providing And Fixing Solar Pump Construction Of One Room Pumping Out Of Water Pond To Gull Main Road And Ambedkar Road. Interlocking Tiles Work In Village-Sabotta Mustafabad, Yea Wc-06

BOQ

Name of Work:- Providing and fixing of SOLAR PUMP Construction of One Room Pumping out of water Pond to Gull and Ambedkar Road Interlocking tiles work in village-Sabota mustafabad, YEA
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sq.M on plan) including dressing of sides and ramming ob bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, withen a lead of 50m. Depth From 0.0 to 1.5 M below G.L.
2Cement concrete with 4cm Guage Approved Stone ballast , Coarse Sand& Cement in the proportion of 8:4:1 including Supply of all material, Labour, Tools & Plants etc required for Proper completion of the work. UPPWD/SOR/281/P-17
3M-150 brick work in 1:4 cement and coarse sand of ( 2.2 fineness modulous) mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work .
4M-150 brick work in 1:4 cement and coarse sand of ( 2.2 fineness modulous) mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work .
5Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level DAR 18/5.33.1/P-241
6Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).All works above plinth level upto floor V level DAR 18/5.33.2./P-242
7Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete.(DAR/5.9.1/BasedonUPPWD/SOR-2020)
8Lintels, beams, plinth beams, girders, bressumers and cantilevers.(DAR/BasedonUPPWD/SOR-2020)
9Suspended floors, roofs, landings, balconies andaccess platform. DAR-18/ 5.9.3
10Edges of slabs and breaks in floors and walls: Under 20 cms wide. (DAR/5.9.16.1/Based on UPPWD/SOR-2020))
11Earth work in rough excavation , banking excavaated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, all leads as per ( A.R. ) For all kind of soil.
12Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to Plinth Level. Thermo-Mechanically Treated bars. (DAR/5.22.6/BasedonUPPWD/SOR-2020)
1312 mm cement plaster of mix:1:6(1 cement: 6 coarse sand) DAR-18/13.4.2/P-222
146 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.DAR-18/13.17/P-912
1515 mm cement plaster on rough side of single : 1:6 (1 cement: 4 coarse sand) DAR-18/13.4.2/P-901
16Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) DAR-18/13.44.1/P-935
17Distempering with oil distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade Based on DAR 18/ 13.40.
18Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.DAR-18/13.26
19Painting with synthetic enemel paint of approved brand and manufacture to give an even shade:Two or more coats on new work. Based on DAR 18/13.61.1
20Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110mm dia Pipes. (DAR/12.41.2/Based on UPPWD/SOR-2020)
21Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm (DAR/12.42.3.2/Based on UPPWD/SOR-2020)
22Bend 87.5° 110 mm bend (DAR/12.42.5.2/Based on UPPWD/SOR-2020)
23Shoe (Plain) 110 mm Shoe (DAR/12.42.6.2/Based on UPPWD/SOR-2020)
24Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm (DAR/12.43.2/Based on UPPWD/SOR-2020)
25Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer UPPWD SOR-2020/DAR-18/10.4
26Construction of Granular Sub-Base by providing close graded material, mixing in mechanical mix plant at OMC, carriage of mixed material to work at site, spreading uniform layers with motor grader on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 for Grade-1 material. (MORTH/(AR/YEIDA/Based on UPPWD/SOR-2020)
27Providing and laying 80mm thick I.S.I. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of Engineer-in-charge with conforming to IS-15658 and IRC:SP:63. (AR/YEIDA/ Based on UPPWD/SOR-2020)
28Trom Solar 10 horsepower DC SPV Deep Well Submersible Pumping System (Modell-XIII) Numbers of Poles of Motor 04 motor speed in RPM ( 2800) Bore size 150 mm Delivery Size 63mm and section head 45 metre etc
29Supplying of PVC pipe (Finolex ,Kisan,Supreme make - ring fit) of following dia 6 Kg / cm2 including all specials & fittings etc. as required for proper complition of work.( The contractor has to arrange the source of water and require head for testing ).140 mm dia
30concrete with 2cm Guage Stone grit , Coarse Sand& Cement in the proportion of 4:2:1 including Supply of all material, Labour, Tools & Plants etc required for Proper completion of the work. UPPWD/SOR/279a/P-17 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56491677
AUTHORITY Government Departments
TENDER VALUE 33.71 Lakhs
LAST DATE 23-07-2026
Authority
Authority Name Yamuna Expressway Industrial Development Authority
Work Description Tender For Providing And Fixing Solar Pump Construction Of One Room Pumping Out Of Water Pond To Gull Main Road And Ambedkar Road. Interlocking Tiles Work In Village-Sabotta Mustafabad, Yea Wc-06
Basic Detail
Tender No YEA/GM(PROJECT)/2026/542 DT-10/07/2026
Bidding Type Tender
Location
City lucknow
State Uttar Pradesh
Key Dates
Publish Date 15 Jul 2026
Submission Date 23 Jul 2026
Open Date 24 Jul 2026
Finance
Tender Value 33.71 Lakhs
Tender Fee 930
EMD 67500
Exemption Not Available
Document List
17.pdf
BOQ_2194491.xls
ed9485af-16ca-49ae-b39e-4762159fee5a.html
Tendernotice_1 (29).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 15, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Jul 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
pdf

17.pdf

xls

BOQ_2194491.xls

html

ed9485af-16ca-49ae-b39e-4762159fee5a.html

pdf

Tendernotice_1 (29).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders