Tender For Construction Of A Cremation Ground (Shamshan Ghat) On Plot No. 336 (M) In Ward 32, Nai Basti (Dhamda Adda Locality).
Tender Value
89.35 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
23 days left
EMD
8.95 Lakhs
Bank guarantee accepted
Document Fee
10620
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hathras → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of A Cremation Ground (Shamshan Ghat) On Plot No. 336 (M) In Ward 32, Nai Basti (Dhamda Adda Locality).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundations in ordinary soil ( Loam clay or sand ) including lift up to 1.5 m and lead up to 30.0 meter and including filling, watering and ramming of excavated earth in to the trenches or into the space between the building and the sides of foundation trenches or in to the plinth and removal and disposal of surplus earth as directed by the Engineer- in charges up to a distance of 30 m from the foundation trenches |
| 2 | Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Brick ballast 40 mm gauge) |
| 3 | First class brick work in 1:4 cement and coarse sand mortar in Foundation & Filling one brick thick including supply of all materials, labour and T & P etc. required for proper completion of work. |
| 4 | First class brick work in 1:4 cement and coarse sand mortar in Super Structure brick thick including supply of all materials, labour and T & P etc. required for proper completion of work. |
| 5 | RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in lintels of door and window excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools and plants etc. required foe proper completion of work including cost of binding wire. The rate excludes making of drip course which shall be paid extra. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) for Slab |
| 6 | RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in lintels of door and window excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools and plants etc. required foe proper completion of work including cost of binding wire. The rate excludes making of drip course which shall be paid extra. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) for Beam |
| 7 | Supply, Fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications including supply of all material, labour, Tools & Plants etc. required for proper completion of work |
| 8 | 12 mm thick Plaster with cement & course Sand of 1.25 FM Mortar in 1:4 |
| 9 | Providing and laying of 600x600 mm vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 10 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 11 | Laying cement concret with cement, c.sand and 20 mm stone grit in 1:2:4 |
| 12 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 13 | Finishing wall with weather coat paint (Asian or Berger Brand) on new surface with two coat to give an even shade including supply of all material, labour & tools and plants etc. requiredfor proper completion of the work. |
| 14 | Providing and fixing aluminium work for doors, windows, ventilators and partitions For shutters of doors, windows & ventilators Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 15 | Providing and fixing glazing in aluminium door, window, ventilator Providing and fixing 12 mm thick prelaminated particle board |
| 16 | Providing of wall painting with make picture and slogan and writing making base of all work complete. |
| 17 | Providing of 3D wall painting with picture including of making base of all work complete. |
| 18 | Supply,Laying and Consolidation of 22.40-53 mm gauge stone Ballast |
| 19 | Supply and Laying of Rubber moulded C.C Interlocking Tiles 80mm thick in road pavement having a compressive strength not lass than 300 kg / cm2 including 40 mm thick bed of fine sand of F/M 1.25 |
| 20 | Supply and Fixing of 11 cm internal dia PVC down pipe (kissan/suprime make) complete with bends with door at top and plain at bottom and grantings and including supply of necessary MS clamp 2.5cm X 3mm Fixed to wall with cement mortar 1:2 and including supply of 15cm long 6mm dia nail all material, labour and T&P etc. required for proper completion of work and also including repair of plaster pointing etc.if damaged during fixing of pipe |
| 21 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. |
| 22 | Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all necessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducing bush, reducers, WC connectors, couplers, cowels, clamps, rubber rings etc. complete.(as per MR) SWR PIPE for soil , waste & vent pipe. 160 mm dia |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.) 20 mm nominal outer dia .Pipes. 513.75X0.85=436.68 |
| 24 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20mm nominal bore 461.75X0.85=392.48 |
| 25 | Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings Flexible pipe 40mm dia |
| 26 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap 2731.45X0.85=2321.73 |
| 27 | Providing and Fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing sistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. 5781.35X0.85=4914.14 |
| 28 | Providing and fixing of 15mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 434.20X0.85=369.07 |
| 29 | Providing and Placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 9.70X0.85=8.245 |
| 30 | Wiring point for light with 1.50sqmtr F.R. PVC insulated multi strand copper conductor cable in PVC conduit pipe partly concealed in the wall complete with 8 SWG GI earth continuity wire, piano type switch & ceiling rose/anlge/batten holder on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, as diredted. including matching colour wash (E/M SI NO. -131 (c) 2016 |
| 31 | S/Wiring of submain with two number 2.5 sqmm FR buti in 20 mm dia heavy duty same as SI 261 (B) PVC insulated multistand copper conductor cable partly concealed in wall and partly laid in slab along with the reinforcement befor concreting complete with 8 SWG GI earth continuity wire including matching colour wash etc complete in all respect. (E/M SI No.-261C) |
| 32 | Wiring points for light with 1.5 sqmm.FRLSH PVC insulated single core aluminium condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. |
| 33 | Same as item No. (1) but for fan and light duty exhaust fan. |
| 34 | Same as item No.(1) but for 5 amp plug point with piano type switch and socket etc. |
| 35 | Supply & installation of Metal LED Bulb (White, 20 Watts) of approved make Havells make |
| 36 | Supply and burying of 40mm dia x 4.5meters long G.I. pipe, vertically for earthing having 12 mm dia. Holes spaced 75mm apart drilled upto 2 meters from the bottom complete with earthing lead of no 6 to 8 SWG GI wire in GI pipe upto appron (and from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board, 30cm. square C.I. box with hinged cover, masonary enclosue, funnel at top, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. |
| 37 | Supply & fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the wirk as directed at site. |
| 38 | Supply and fixing of 240 volts 'L' series miniature circuit breaker 9 K.A / 10 K.A.in existing MCB, DB complete with connections as required. 5 - 32 amps. |
| 39 | Supply and fixing of flush/surface mounting distribution boards complete in all respects. 8Way SPN |
| 40 | Supply & installation of Ceiling Fan(1200mm dia) of approved make Havells make |
| 41 | Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. Pipe 19mm dia duly painted, complete in all respects. |
| 42 | RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Raft foundation and Footing For Retaining Wall |
| 43 | RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Column or Wall For Retaining Wall (0.45+0.30)/2=0.38 |
| 44 | Supplying of Earth for cutting or in embankment in ordinary soil earth work in filling or embankment to be in 20 cm layers, including ,watering ,Dressing ,compacting ,ramming the soil to achive 95% proctor density ,and dressing the surface to be required levels and slope and also including 1.50m lift and 30 m lead . The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m distance and cartage upto 8Km distance as directed by the Engineer-in-charge |
| 45 | Sand filling in plinth including supply of necessary quantity of sand from a distnce not exceeding 8 Km. from the site of work & including wstering, dressing etc. Rate includes cost of all materials, labour, T&P etc. required for proper complition of the work. |
| 46 | 2.5 cm (1\\") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1\\") graded approved stone grit, laid inpanels finished with 3 mm. (1/8\\") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3\\") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm.(1½\\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. requiredfor proper completion of the work. |
| 47 | M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work |
| 48 | Apply two coat superior synthetic enamal paint including primer coat on steel surface |
| 49 | Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat: 12.19.1 With common burnt clay F.P.S. (non modular) brick tiles of class designation 10 |
| 50 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. |
| 51 | Construction of granular sub-base byproviding close graded material,spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 |
| 52 | Supply and Laying of Rubber moulded C.C Interlocking Tiles 80mm thick in road pavement having a compressive strength not lass than 300 kg / cm2 including 40 mm thick bed of fine sand |
| 53 | Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. |
| 54 | Providing and laying PCC with cement, C Sand and 40 mm gauge stone ballast in 1:4:8 |
| 55 | First class brick work in 1:4 cement and coarse sand mortar in Super Structure brick thick including supply of all materials, labour and T & P etc. required for proper completion of work. |
| 56 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 57 | Supply,Laying and Consolidation of 22.40-53 mm gauge stone Ballast |
| 58 | Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. |
| 59 | fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. |
| 60 | S&F of 63 Amp. DP MCB |
| 61 | Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. |
| 62 | Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. |
| 63 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 6 sq. mm 2 core |
| 64 | Supply and laying of 50mm dia heavy guage 14 SWG (2 mm thick) rigid steel conduit complete with bend and other acessories as required and 14 SWG fish steel wire etc. in slab alongwith reinforcement before concreting, and plastering etc,complete in all respect |
| 65 | S/F of 50mm dia B class G.I pipe |
| 66 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. |
| 67 | S&F of 63 Amp. four pole change over switch on a angle iron frame, including the cost of labour,T&P, painting and other material required for propercompletion of the work |
| 68 | Supply of 90 W LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 andabove Protection complete in all respect. CAT- AAA, with LM 79-08 & LM 80-08 report of NABL, 5 years replacement guarantee/ warranty, BIS certificate & AAA catagary certified by pwd. as per pwd schedule no. -1423 |
| 69 | Supply & Fixing Garden Bench (Victoria Type Bench)•Cast Iron having back height of 720 mm and seating height of 390 mm.•M.S Tube of 65mm X 25mm rectangular tube having length of 1520 mm in 10 Nos. •For seating purpose with extra support 25mm X 5mm M.S Flat for extra stability all sharp and rough edge of Bench are to be grinded with grinder and all fill up with m seal where its required necessary thus bench is having the provision of hole past system (for grouting). •Bench in complete with a coating of 1st class red oxide and with two coats of synthetic enamel of 1st class quality paint in green colour. •Finally bench is assembled with nuts and bolts.•Gross weight of each bench is 70 kg. |
| 70 | CHIMPU/POLO BEAR/PENGUIN DUSTBIN 110 Ltr. |
| 71 | Supply, boring and fixing 1.50 HP single phase submarcible pump including boring, 110mm dia PVC Stainer and Plaine Pipe 6kg/sqcm Tirupati make ISI Mark, 32mm dia GI Pipe B-Class Jindal Make ISI Mark, Filter Colth,Glowing of 1.5 HP Single Phase Motor Pump Set ISI Mark Aroma/Rockwell Make, Copper Cable 3 core 2.5mm2 Kent/Finolex Make ISI Mark,Aluminium Cable 2 core 10mm2 Kent/Finolex Make ISI Mark, Panel with overload relay and single phase protection ISI Mark Haveles/Bentex Make, 32mm dia MS Clamp,1.25” Elbow etc. all T&P,labour,material, all connections and wiring as per atteched specifications and as per directed Engineer in Charge |
| 72 | GST 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender