Tender For Construction Of Adivasi Sankruti Bhawan At Jeypore Of Jeypore Block
Tender Value
41.74 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
0 days left
EMD
42000
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Koraput → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Adivasi Sankruti Bhawan At Jeypore Of Jeypore Block
BOQ
| Sl. No. | Item Description |
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Earth work excavation of foundation in hard soil or gravelly soil within 50m initial lead and 1.5m initial lift including rough dressing and leveling the bed and depositing the excavatd earth including cost of all labours and T & P required for the work etc. complete as per direction of Engineer-in-Charge. |
| 3 | Providing and laying sand in foundation and plinth filling with Sand in 9” thick layers of approved quality free from dust, dirt and other foreign materials to proper line and grade, watering and ramming etc complete with all lead, lifts de-lifts including labour charges with cost, conveyance, tax and royalty of all materials, labour, T&P and other incidental charges etc complete as per direction of Engineer-in-Charges. |
| 4 | Cement Concrete in Proportion (1:4:8) in foundation and floors using 4cm (3/2”) size Clean hard black crusher broken granite metal of approved quality from approved quarry including hosting lowering and laying in layers not exceeding 15cm (6”) thick to the required level, ramming watering and curing etc complete including all cost, conveyance, taxes and royalties of materials and labour with T&P required for the work etc complete. |
| 5 | Brick Masonry work in cement motor (1:6) by using of Fly Ash Brick having crushing strength not less than 75Kg per Sq. Cm. including splays cutting, circular molding, chamfering and corbelling, watering and curing etc complete as per direction of Engineer-in-Charges - Foundation and Plinth |
| 6 | Brick Masonry work in cement motor (1:6) by using of Fly Ash Brick having crushing strength not less than 75Kg per Sq. Cm. including splays cutting, circular molding, chamfering and corbelling, watering and curing etc complete as per direction of Engineer-in-Charges - Superstructure |
| 7 | R.C.C. Work of M-20 grade with 20mm and down grade black hard granite crusher broken chips of 150mm cubes at 28days using minimum quality of cement as per clause 003.5 of IRC–21– 1987 and IS–456–1987 with clean crusher broken hard granite chips of 20mm. to 10mm including watering and curing, Centering and Shuttering for R.C.C. Work, Cost, conveyance, tax and royalty of all materials and labour with T&P required for the work etc complete - :- Column Footing |
| 8 | R.C.C. Work of M-20 grade with 20mm and down grade black hard granite crusher broken chips of 150mm cubes at 28days using minimum quality of cement as per clause 003.5 of IRC–21– 1987 and IS–456–1987 with clean crusher broken hard granite chips of 20mm. to 10mm including watering and curing, Centering and Shuttering for R.C.C. Work, Cost, conveyance, tax and royalty of all materials and labour with T&P required for the work etc complete:- Column SS |
| 9 | R.C.C. Work of M-20 grade with 20mm and down grade black hard granite crusher broken chips of 150mm cubes at 28days using minimum quality of cement as per clause 003.5 of IRC–21– 1987 and IS–456–1987 with clean crusher broken hard granite chips of 20mm. to 10mm including watering and curing, Centering and Shuttering for R.C.C. Work, Cost, conveyance, tax and royalty of all materials and labour with T&P required for the work etc complete :- Grade Beam |
| 10 | R.C.C. Work of M-20 grade with 20mm and down grade black hard granite crusher broken chips of 150mm cubes at 28days using minimum quality of cement as per clause 003.5 of IRC–21– 1987 and IS–456–1987 with clean crusher broken hard granite chips of 20mm. to 10mm including watering and curing, Centering and Shuttering for R.C.C. Work, Cost, conveyance, tax and royalty of all materials and labour with T&P required for the work etc complete :- Sill & Lintel Bend |
| 11 | R.C.C. Work of M-20 grade with 20mm and down grade black hard granite crusher broken chips of 150mm cubes at 28days using minimum quality of cement as per clause 003.5 of IRC–21– 1987 and IS–456–1987 with clean crusher broken hard granite chips of 20mm. to 10mm including watering and curing, Centering and Shuttering for R.C.C. Work, Cost, conveyance, tax and royalty of all materials and labour with T&P required for the work etc complete – Chajja |
| 12 | R.C.C. Work of M-20 grade with 20mm and down grade black hard granite crusher broken chips of 150mm cubes at 28days using minimum quality of cement as per clause 003.5 of IRC–21– 1987 and IS–456–1987 with clean crusher broken hard granite chips of 20mm. to 10mm including watering and curing, Centering and Shuttering for R.C.C. Work, Cost, conveyance, tax and royalty of all materials and labour with T&P required for the work etc complete - Ground Floor :- Beam SS |
| 13 | R.C.C. Work of M-20 grade with 20mm and down grade black hard granite crusher broken chips of 150mm cubes at 28days using minimum quality of cement as per clause 003.5 of IRC–21– 1987 and IS–456–1987 with clean crusher broken hard granite chips of 20mm. to 10mm including watering and curing, Centering and Shuttering for R.C.C. Work, Cost, conveyance, tax and royalty of all materials and labour with T&P required for the work etc complete:- Roof Slab |
| 14 | Supplying fitting and placing uncoated HYSD Bar reinforcement complete as per drawing and technical specification and placing in proper position as required for R.C.C. Work including cost, conveyance, taxes of Steel and cost of binding wire 18 to 20 gauge and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. |
| 15 | 2.5cm (1”) thick Grading Concrete over roof slab in Cement Concrete (1:2:2) 6mm (1/4”) size Clean hard black crusher broken granite Chips of approved quality from approved quarry including hosting lowering and laying in layers ramming watering and curing etc complete including all cost, conveyance, taxes and royalties of materials and labour with T&P required for the work etc complete. |
| 16 | 12mm thick Cement Plaster in Cement Mortar (1:6) over brick work after raking out joints cleaning & finishing the plaster surface smooth including watering and curing, Scaffolding screening sand etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. |
| 17 | 16mm thick Cement Plaster in Cement Mortar (1:6) over brick work after raking out joints cleaning & finishing the plaster surface smooth including watering and curing, Scaffolding screening sand etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges |
| 18 | Supplying fitting and fixing of vitrified tile in floors of size 600mmx600mm of approved make conforming to IS:13755 laid on 210mm thick Cement Mortar (1:4) (1 Cement : 4 Course Sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of Engineer-in-Charge |
| 19 | Providing and fixing of Glazed Floor tiles in Floor trade and landing on 25 mm thick bed of cement morter (1:1) |
| 20 | Supplying, fitting and fixing in position 6.5-6.7mm thick Wall Tiles in dadoes in all floors at all heights and riser of steps with application of 12 mm thick cement mortar of (1:3) in proper slop and filling the gaps with white cement and colouring the surface with silicon paint finished as per the design & drawing with all cost of materials, labour,conveyance, taxes T&P and complete as per the direction of the Engineer-in-charge |
| 21 | Manufacturing and Supplying of M.S. Door, Window, Ventilator and Grill Gate made up all round angular frame size 35x35x5mm, Door and Window angular frame size 25x25x3/5mm with 20 gage C.R. Sheet supporting flat size 25x8mm and 18x5mm including fitting of clamp, hinges, tower bolt, aldrops including all cost, conveyance tax of materials and labour with T&P required for the work etc complete |
| 22 | Providing & Painting with two coats to the entire inside surface with Distempering of any approved make to the inner surface with two of Putty after scraping and cleaning the surface over One coat of Water Bound Wall Primer including all cost of materials, scaffolding, labour, watering & curing T&P etc complete as per direction of Engineer-in-charge. |
| 23 | Providing & Painting with two coats to the entire outside surface with Weather Coat of any approved make to the outer surface after scraping and cleaning the surface over one coat of Water Bound Wall Primer including all cost of materials, scaffolding, labour, watering & curing T&P etc complete as per direction of Engineer-in-charge. |
| 24 | Painting Two Coats (Plastic Enamel Paint) with any approved shade on New Door and windows over a coat of Primer/Red Oxide Paint including all cost, conveyance, tax of materials and labour with T&P required for the work etc complete |
| 25 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) - S point |
| 26 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) - M point |
| 27 | Point wiring for 5 / 6 amp modular socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch , phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex /L&T / Anchor / Havels / V Guard ) |
| 28 | Surface wiring to submain in FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1x1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) - 2x1.50Sqmm PVC Wire |
| 29 | Surface wiring to submain in FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1x1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) - 2x2.50Sqmm PVC Wire |
| 30 | Supplying and fixing of following way single pole and neutral,sheet steel MCB distribution board consumer unit,240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar hinged front acrylic cover for the MCB knobs detachable gland plate,interconnections,phosphatized and powder painted including earthing etc. as required. (But with out MCB / RCCB/Isolator) |
| 31 | Earthing with G.I earth pipe 3 meter long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with chorcoal and salt as required. |
| 32 | Installation testing Commissioning of Pre-wired fluoresent fitting/ compact fluorescent fitting of all izes complete with all accessories and tube etc. directly on celling wall including connection with 1.5 sqmm FR PVC insulated single core multistrand copper conduct and earthing as required |
| 33 | Installation testing and commissioning of celling fan including wiring the down rods of standard length ( upto 30cm)with 1.5 sqmm FR PVC insulated single core multiatrand copper conductor etc. as requred |
| 34 | Cilling Fan |
| 35 | Bulb LED |
| 36 | LED Street light |
| 37 | LED Tube Light |
| 38 | Exhaust fan |
| 39 | Supplying all materials, labour, T&P and fiixng wash down water closet ( Eropean W . Pan) with integral S or P Trap conforming to IS 2556 part 8-2004 to the floor with wooden plug and choomim plated screws includin jointing the trap with soil pipe in cement mortor(1:1) etc. all complete as per specification |
| 40 | Supplying all materials, labour, T&P and fiixng 10 Ltr. capacity low level flushing cistern (Slim line) with a pair of PVC braket complete with fittings such as siphonic arrangement, 15mm nominal size PVC ball valve with polythene float, PVC handle, unions, couplings for connection with inlet, out let and over flow pipes, 40mm dia PVC flush bend, 12mm dia PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc complete as per specification. |
| 41 | Ssupplying and fixing bowl pattern urinal confoeming to IS 2556 Part 6-1996 including connecting the urinal of Angle back 450X375X350 mm with waste fitting as per IS 2556 sizes respectively with waste pipe by means of while lead mixed with chopped hemp etc. all complete as per specification ( vide item no 3.4.8 Page no 149 of PH Analysisi of rate 2013) |
| 42 | Providing and Fixing on wall face unplasticised PVC moudular fitting / accessories for unplasticised rigid PVC rain water opipes conforming to is 13592 Type A including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion including including all cost conveyance of materials and labour with T &p required for the work etc. complete as per direction of EIC - 110mm dia Door Tee |
| 43 | Providing and Fixing on wall face unplasticised PVC moudular fitting / accessories for unplasticised rigid PVC rain water opipes conforming to is 13592 Type A including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion including including all cost conveyance of materials and labour with T &p required for the work etc. complete as per direction of EIC - 110mm dia Bend/ Tee |
| 44 | Providing and Fixing on wall face unplasticised PVC moudular fitting / accessories for unplasticised rigid PVC rain water opipes conforming to is 13592 Type A including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion including including all cost conveyance of materials and labour with T &p required for the work etc. complete as per direction of EIC - 110mm dia Cowl |
| 45 | Providing and Fixing on wall face unplasticised PVC moudular fitting / accessories for unplasticised rigid PVC rain water opipes conforming to is 13592 Type A including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion including including all cost conveyance of materials and labour with T &p required for the work etc. complete as per direction of EIC - 110mm dia Nani Trap |
| 46 | Providing and Fixing on wall face unplasticised PVC moudular fitting / accessories for unplasticised rigid PVC rain water opipes conforming to is 13592 Type A including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion including including all cost conveyance of materials and labour with T &p required for the work etc. complete as per direction of EIC -110mm dia Socket |
| 47 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes - 90mm dia PVC Pipe |
| 48 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes - 110mm dia PVC Pipe |
| 49 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. (excluding cost of Earth Work in trenches) - 32mm dia PVC Pipe |
| 50 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. (excluding cost of Earth Work in trenches) - 25mm dia PVC Pipe |
| 51 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. (excluding cost of Earth Work in trenches) - 20mm dia PVC Pipe |
| 52 | supplying and fixing of porcelain Counter Top basin Ovel Shape 550X430 wash basin with hole for piller tapes conformation to IS 2556 Part 4-2004 with cost iron or MS brackets painted white including cutting holed in walls and making good the damaged etc.all complete as per specification ( vide item no 3.4.11 Page no 149 of PH Analysisi of rate 2013) |
| 53 | Supplying all labour, T&P and fixing of 15mm dia CP bib cock/ Taper cock/ Long body bib cock polished bright of the following nominal sizes as per specification complete. |
| 54 | Supplying and Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete. |
| 55 | Supplying and Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge |
| 56 | Lobuor for drilling a perfectly vertical bore hole of specified diameter for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination drilling rig as required to suit to the site condition as per the direction of the Engineer-in-charge including use of own rig with its accessories,tools and plant and consumable etc. For lowering of 200mm/150mm dia PVC / GI pipes for housing,fitted with socket and with or without well screen as per the necessity for soft,medium hard,and bolder formation GI/PVC casing pipes if required to prevent collapse of over burden including lowering and withdrawing after completing of the tube well. |
| 57 | Lowering of the following size G.I/ PVC pipes with or without slotted pipes as per the necessity from ground level up to 30mtr. depth and fitted and fixed up in perfectly vertical position including cutting threading pipe and slotted pipe and supplying and fixing all jointing materials,tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from the above. |
| 58 | Cleaning and developing the tube wells with their own compressor continuosly worked till clear & adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of the Engineer-in-charge. |
| 59 | 150mm dia PVC Casing pipe including threding and belling etc. all complete including all taxes and coveyance |
| 60 | Supplying of 3 phase 50HZ submersible pump set suitable for 200 dia tube well with head of 55 mt and discharge of 2 LPS complete |
| 61 | Supplying fitting fixing of 3 phase phase star deltafully automatic control panel with ampere meter volt meter single phasing preventor over load relay and indicater lamp etc. suitable for the above pump sets ( Make-SJ/Diamond)complete |
| 62 | Supplying fitting fixing of 4 Sqmm 3 core Submersible flat copper cable suitable for above pump set confirming to relevant IS mark complete |
| 63 | Supplying fitting fixing of suitable dia HDPE pipe of 10 kg/sqcm pressure rating confirming to relevant IS specification with ISI mark suitable for above pump sets |
| 64 | Supplying fitting fixing of 40mm bour clamp including cost of materials. Conveyance,taxes of all materials T &P scaffolding & other Incidential charges with all lead lifts and delift etc. complete as per direction of EIC |
| 65 | Supplying fitting fixing of 6mm steel wire( Supporting Rope to Morter) including cost of materials. Conveyance,taxes of all materials T &P scaffolding & other Incidential charges with all lead lifts and delift etc. complete as per direction of EIC |
| 66 | Supplying fitting fixing of 8\\" Heavy Quality Bore Cap including cost of materials. Conveyance,taxes of all materials T &P scaffolding & other Incidential charges with all lead lifts and delift etc. complete as per direction of EIC |
| 67 | Supplying fitting fixing of 50 mm Heavy Quality GI Bend including cost of materials. Conveyance,taxes of all materials T &P scaffolding & other Incidential charges with all lead lifts and delift etc. complete as per direction of EIC |
| 68 | Installation of 1 HP S S pump Sets inside the bour to a depyh of minium 45 mts and joinging to pump Delivery line to the exiting delivery main including cost of materials. Conveyance,taxes of all materials T &P scaffolding & other Incidential charges with all lead lifts and delift etc. complete as per direction of EIC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender