Tender For Performance Based Contract Annual Repair Running And Maintenance Of Sewerage Network Of Stp Malyana Zone For Two Years Complete Per As Direction Of Engineer-In-Charge.
Tender Value
1.57 Crore
Estimated cost
Bid Submission
30 Jul 2026
7 days left
EMD
2.32 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Performance Based Contract Annual Repair Running And Maintenance Of Sewerage Network Of Stp Malyana Zone For Two Years Complete Per As Direction Of Engineer-In-Charge.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Jul-2026 | corrigendum | Financial Bid | 30-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Deployment of manpower (Sewerman, Beldar, Pumber Supervisor, Data entry operator etc.) for repair running and maintenance of sewerage network of various diameter under STP Malyana network Zone for 2 year 2026-27 and 2027-2028 complete including setting up office for record of complaint ( within computer and printer setup, internet connection, table chairs also one dedicated telephone number) and store for labour, providing all the necessary tools for maintenance of sewer network, uniform and boots all the safety gear (gloves, helmet, safety harness, face shield, gas mask and badges etc.) in all respect as per the directions of Engineer-in-charge. |
| 2 | For First Year |
| 3 | For Second Year |
| 4 | Demolishing cement concrete manually/ by mechanical means disposal of unserviceable material within all lead as per direction of Engineer-in-charge. |
| 5 | Excavation in earth work and disposal of all excavated earth up to all leads and lifts, disposed earth to be levelled neatly dressed as per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 6 | Providing, laying jointing & testing in trenches centrifugal cast ductile iron (spun) pressure pipes as per IS:8329/2000 Class K-7 duly ISI marked, inside cement mortar lined suitable for tyton (push on joints) for sewer lines including cutting of pipes, chamfering where required (earth work in trenches and jointing of pipes to be measured and paid for separately) including carriage up to the site of work, testing etc., complete as per instructions of the Engineer-in-charge. |
| 7 | 150 mm |
| 8 | 200 mm |
| 9 | 250 mm |
| 10 | 400 mm |
| 11 | Providing & fixing in trenches centrifugal cast ductile iron fittings of 9523/2000 class A, series K-12 with inside cement mortar lined suitable for tyton (push on joints) with sewers, such as socketed bends of all degrees, socketed, tees, collars and all other required fittings, including carriage up to the site of work, testing etc. complete as per instructions of the Engineer-in-charge. (earth work in trenches and jointing of fittings to be measured and paid for separately). |
| 12 | 150 mm dia double socket DI Bend of require degree |
| 13 | 90 degree |
| 14 | 45 degree |
| 15 | 22.5 degree |
| 16 | 11.25 degree |
| 17 | DI Tee 150X150X150mm |
| 18 | DI Tee 150X150X100mm |
| 19 | MJ Collar 150 mm dia |
| 20 | 200 mm dia double socket DI Bend of require degree |
| 21 | 90 degree |
| 22 | 45 degree |
| 23 | 22.5 degree |
| 24 | 11.25 degree |
| 25 | DI Tee 200X200X150mm |
| 26 | DI Tee 200X200X200mm |
| 27 | MJ Collar 200 mm dia |
| 28 | 250 mm dia double socket DI Bend of require degree |
| 29 | 90 degree |
| 30 | 45 degree |
| 31 | 22.5 degree |
| 32 | 11.25 degree |
| 33 | MJ Collar 200 mm dia |
| 34 | 400 mm dia double socket DI Bend of require degree |
| 35 | 90 degree |
| 36 | 45 degree |
| 37 | 22.5 degree |
| 38 | 11.25 degree |
| 39 | MJ Collar 400 mm dia |
| 40 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket confirming to IS 12820/1989 complete as per direction of Engineer-in-charge. |
| 41 | 150 mm |
| 42 | 200 mm |
| 43 | 250 mm |
| 44 | 400 mm |
| 45 | Providing andlaying cement concrete 1:4:8(1:cement:2sand:4 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth. complete in all respect as per the direction of Engineer-in-charge. |
| 46 | Providing form work with steel plate 3.15 m.m thick welded with angle iron 30x30x5 m.m so as to givea fair finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plaiin concrete work in:- Foundation ,footings basis of columns etc and mass concrete complete as direction of Engineer-in-charge. |
| 47 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of entering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) complete as direction of Engineer-in-charge. |
| 48 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of entering, shuttering, finishing and reinforcement, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) complete as direction of Engineer-in-charge. |
| 49 | Providing mild steel/tor steel reinforcement for RCC work includng bending binding and placing in position complete upto level @60kg/m^3 as per the direction of er in charge. |
| 50 | Providing and laying in position specified grade of cement concrete, excluding the cost of entering, shuttering, finishing and reinforcement, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) complete as direction of Engineer-in-charge. |
| 51 | Providing fixining of SFRC frame cover dia 560mm manufacture as per BIS:12592 (Part 1 &2) for Manhole/sewer chamber of load capacity EHD/HD/MD complete installation as per direction of Engineer-in-charge. |
| 52 | EMD (Extra Heavy Duty) |
| 53 | HD (Heavy Duty) |
| 54 | MD (Medium Duty) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender