Tender For annual repair & maintenance of Water Supply Scheme To Chowari Town In Tehsil Bhattiyat Distt. Chamba ( H.P.)(Sub Head:-C/O Reinforced Cement Concrete Column ,Bricks Works, Flooring & providing and Fixing Wpc In Walls Etc. At Ae Residence B
Tender Value
14.87 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
4 days left
EMD
29759
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Water Supply Scheme To Chowari Town In Tehsil Bhattiyat Distt. Chamba ( H.P.)(Sub Head:-C/O Reinforced Cement Concrete Column ,Bricks Works, Flooring & providing and Fixing Wpc In Walls Etc. At Ae Residence Building.)
BOQ
| Sl. No. | Item Description |
| 1 | Dismentling roofing including ridges, hips, valleys, gutters etc. stacking the material and disposed of unservicable material with in 20 metres lead.within all leads and lifts as per the direction of Engineer-in-Charge. |
| 2 | Providing and laying cement concrete 1:1.50:3 (1 cement 1.50 sand 3 graded stone aggregate. 20 mm nominal size) and curing complete excluding the cost of form work and rein for cement for reinforced concrete work in:- |
| 3 | Column Pillars,posts and struts, square rectangular or polygonal in plan within all leads and lifts as per the direction of Engineer -in- Charge. |
| 4 | Beams,cantilever,girder and lintel,side of soffits of beam,cantilever,bressumers and lintel exceeding 1 mtr depth in all heights. |
| 5 | Providing form work with steel plates 3.15 milimetre thick welding with angle iron in frame 30x30x5 milimetre, so as to give fair finish including centering, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 metres and removal of the same for in-situ-reinforced concrete and plain concrete work in:- |
| 6 | Column Pillars,posts and struts, square rectangular or polygonal in plan within all leads and lifts as per the direction of Engineer -in- Charge. |
| 7 | Beams,cantilever,girder and lintel,side of soffits of beam,cantilever,bressumers and lintel exceeding 1 mtr depth in all heights. |
| 8 | Providing Tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level. |
| 9 | Brick work using common burunt clay building bricks in super structure above plinth level upto floor two level in cement mortor 1:6 (1 cement : 6 sand) (Ist class brick) all leads and lifts as per Direction of Engineer-in Charge. |
| 10 | Providing wood work in frames of doors , windows ,clearsrory windows and oter frames wrought ,framed fixed in position in Sal wood . |
| 11 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. 40mm thick within all leads and lifts as per the direction of Engineer-in -Charge. |
| 12 | Providing and fixing wire gauge shutters using galvenised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors, windows & clearstory windows i/c bright finished black iron enamelled hinges with necessary screws etc. including within all leads and lifts as per Direction of Engineer-in Charge. |
| 13 | Providing and Fixing anodised aluminium work (JINDLE MAKE) for door,window,ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868.(minimum anodic coating of grade AC 15) fixed with rawl plug and screws or with fixing clips,or with expansion hold fastener including necessary filling up of gaps at junctions at top,bottom and sides with required PVC.neoprene felt etc. Aluminium section shall be smooth rustfree,straight,mitred and jointed mechanically where ever required including cleast angle,aluminium,snap beading for glazing/panelling C.P. brass/stainless steel screws .All complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 14 | Providing and fixing anodized aluminium shutters of doors,windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings whereever required including the cost of PVC/neoprene gasket as required (fittings and glazing/panelling shall be paid for separately) complete within all leads and lifts as per direction of Engineer-in-Charge. |
| 15 | Providing and fixing ACP 5mm thickness in ideal signage, interiors /exteriors used for requring extra wind proof ,risistance and duraability etc., in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc.complete in respect and complete with in all leads and lifts and as per the direction of the Engineer-in-charge |
| 16 | 15 mm thick cement plaster in single coat on rough side of brick stone masonry for enter or plastering up to floor to level including arises internal rounded angles chamfers and /or rounded angles not exceeding 80mm girth and finished even and smooth in CM 1:6 (I cement :6 sand ) within all leads and lifts as per the direction of Engineer-in- Charge. |
| 17 | 20mm (twenty millimetre) thick cement plaster in single coat on rough side of brick / concrete / stone walls for interior plastering upto floor all levels including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (one Cement isto six sand) as per the direction of the engineer-in-charge including carriage of material within all leads and lifts and other incidentals. |
| 18 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete within all leads and lifts as per the direction of Engineer-in- Charge. |
| 19 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth with in all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. |
| 20 | Applying priming coat over new wood and wood based surfaces after and including preoaring the surface by througly cleaning oil, grease, dirt and other foreign matter and papering and knotting ready mixed paint brushing wood primer pink within all leads and lifts as per the direction of Engineer -in- Charge. |
| 21 | Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaningthe surface of dirt, dust and other foreign matters sand papering and stopping with enamel paint other than white within all leads and lifts as per direction of Engineer-In-charge. |
| 22 | Providing and fixing anodized aluminum sliding doors bolt aniodized colour and shade with bolts and nits,screw etc complete as per the direction of Engineer in Charge. |
| 23 | Size 300x16mm |
| 24 | Providing and fixing anodized aluminum tower bolts (barel type ) aniodized transparen or dyed to required colour and shade with necessary screw etc complete as per the direction of Engineer- in- Charge. |
| 25 | Size 200x10mm |
| 26 | Providing and fixing anodized aluminum handles 12mm aniodized transparent or dyed to required colour and shade with necessary screw etc complete as per the direction of Engineer- in- Charge. |
| 27 | Size 125mm |
| 28 | Size 100mm dia |
| 29 | Stone /boulders filling under floor within all leads and lifts as per the direction of Engineer-in -Charge. |
| 30 | Providing and laying cement concrete 1:4:8 (1 cement : 4 sand: 8graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-Charge. |
| 31 | Providing and fixing 10mm thick anti skid water proof stain & impect resistent heavy duty vetrified tiles Nitco/Kajaria and H&R Johnson etc. or equivalant 600x600x10 mm manufectured of approved shade and colour in flooring, tread of steps and landing laid over 12 mm thick cement morter 1:3 ( 1 cement:3 sand) jointed with cement slurry mixed with pigment to match the shade of tile as required complete within all leads and lifts as per the direction of Engineer-in-Charge. |
| 32 | Providing and fixing CPVC pipe and pipe fittins OD 22.2 mm ,SDR-11 as per IS 2846 IS:778 make Fusion/Supreme potable hot and cold water distrubution pressure ratee 28.1 KG Cm2 at 27' to 82' including within all leads and lifts as per direction of Engineer-in-charge. |
| 33 | Providing and fixing viti cous China wash down water closet (European type W.C. pan) with seat and lid 10/12.5/15 litress low level vitreous china flushing cistern & C.P. flush bend with fittings & CI Brackets, 40mm flushbend overflow arrangement with special of standard make and mosquito proof coupling of approved municipal design complete including pointing of fittings and brackets.cutting and making good the walks and floors wherever required W.C. pan with ISI marked complete within all leads and lifts as per the direction of Engineer in Charge |
| 34 | Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings. Flat back 630x450 |
| 35 | Providing and fixing charomium plated brass soap dish with C.P brass brackets fixed to wooden cleats with C.P brass screws as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. |
| 36 | Providing and Fixing CP Brass towel rail complete with CP Brass brackets fixed to wooden plug within all leads and lifts as per the directions of the Engineer-in-Charge. |
| 37 | Providing and fixing 600 mm x 450 mm (Six hundred millimetres into four hundred fifty millimetres) bevelled edge mirror of superior glass mounted on 6mm(six millimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers as per the direction of the Engineer-in-charge including carriage of material withon all leads and lifts and other incidentals. |
| 38 | Providing and fixing C.P brass bib tap with capstan head 15mm (fifteen millimetre) dia with capaston head as per the direction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. |
| 39 | Providing & Fixing WPC ( Wood Plastic Composite) Panelling/ Liming interior side l/Cutting fixing in position up to all lead and lift. The WPC also eco wood wall pannel, not easy to deform moisture proof insteasd and with like all type of decorative coloure as per direction of engineer incharge including carriage of materials and other incidentals. |
| 40 | Steel work in single section including cutting hosing fixing in position and applying a primary coat of red lead paint ion beams joist channels angles, tees flats with connecting plates of angle cleats in main and cross beams ,hips, jack rafters, purlins connected to common rafter and the like, with in all leads , lifts of material and other incidentsals. |
| 41 | Providing and fixing 0.63mm thick prepainted steel sheet in roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns promer coating to back coat of polyster of 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre washers complete with all accesoriees as required as per the direction of Engineer-in-Charge. |
| 42 | Providing and fixing pre-painted sheet ridges or hips 60cm over all of kolar metal single skin trepozoidal profiled sheeting .60mm thickness having 1060mm cover width1126mm 28mm crest depth at 353 mm plus 2 c/c crest distance. There will be two ribs at the center for stiffering having crest depth 2.5mm the main crest width at top 25mm at the lower 81mm base metal of cold rolledsteel cast with zinc waiting top coat with regular modified polysters coating of approved shade and balancing reverse coat with polyster paint including fixeng of sheet with self drilling and self taping screws of size 5.5mm dia an 55mmn length with EPOM sral complete in all respect as per approved specification, drawing ,design and as vper direction of Engineer-incharge, with all leads ,lifts of materials and other incidentals. |
| 43 | Providing and fixing 75mm dia pipe on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sq. cm including filling the joints with approved adhesive complete within all leads and lifts as per direction of Engineer-in-Charge. |
| 44 | Half bricks masonry in common burnt clay building bricks in cement mortar 1:4 (1cement : 4 sand) (Ist class brick) within all leads and lifts as per the direction of Engineer-in-Charge. |
| 45 | 1. The work shall be executed strictly in accordance with IPH/HPPWD/IRC and BIS satisfaction as per instructions of the Engineer-in-Charge.2. Nothing shall be paid to the contractor for rejected work / materials.3. The payment to the labourers will be made in the presence of Junior Engineer concerned a representative of Engineer-in-Charge. 4. The work shall be executed with in stipulated period.5. Silt free sand/stone aggregate of approved quarry shall be used . 6. GST, Labour Cess and Security will be deducted from each bill of the contractor as per Govt. rule.7. The following material required for execution of above work shall be supplied by the Department in Sub Divisional Store against proper indent on the rates:- ( i ) Cement @ Rs. 475/- per bag (ii) steel @ Rs. 65.25- per Kg Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender