Tender For Providing Lighting Arrangements To The Road Over Bridge In Lieu Of Lc No.16 T Km 16/8 Of Mayiladuthurai - Thiruvarur- Thiruthuraipoondi Road (State Highways 23) In Between Railway Km 15/100-15/200 Near Peralam Railway Yard In Thiruvrur Dis
Tender Value
56.75 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
12 days left
EMD
38400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvarur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Lighting Arrangements To The Road Over Bridge In Lieu Of Lc No.16 T Km 16/8 Of Mayiladuthurai - Thiruvarur- Thiruthuraipoondi Road (State Highways 23) In Between Railway Km 15/100-15/200 Near Peralam Railway Yard In Thiruvrur District.
BOQ
| Sl. No. | Item Description |
| 1 | Design, supply, erection, testing, commissioning and handing over of 16 mtrs High Mast Structure with required number of continuously tapered hot dip galvanized steel polygonal sides sections with telescopic strip joints to a total height of 16 metres capable of sustaining the maximum wind pressure at the erection site with single flange base plate secured welded in the bottom of the base mast section with vertically movable hot dip galvanized lantern carriage and accessories such as electrical junction box brackets for providing 8 Nos. of flood light luminaries with control gear box complete head frame assembly, Pulley drive, stainless steel wire rope single/double drum self-lubricating winch arrangement suitable for raising and lowering the luminaries carriage ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation, bolt & nuts along with washers and anchor plates and templates including supply and fixing the following accessories in the Mast. |
| 2 | a) Design and casting of suitable foundation with 1:2:4 mix RCC concrete with 30 cm projection above the ground level with 1 metre Width x 1 metre Length and 2 metre depth with necessary galvanized foundation bolts nuts and washers and dump plate enclosing the bolts for the High Mast considering the safe soil bearing capacity at site - 1 set. b) High powered power tool complete with hand held control panel and motor with push button type remote control switch suitable for 3 phase 415 V 50 HZ for raising and lowering of the lantern carriage complete to operate all fittings mounted in the base to couple with winch - 1 Set |
| 3 | d) Neon aviation obstruction light - 1 No e) 2 Nos of special GI earth electrodes with copper plate 300 mmx300 mm x 3mm and copper flat (1”x1/4”) interconnection as per ISS complete with earth connection - 1 set. f) Hot dip galvanized lightning arrestor - 1 No.g) Flood light luminaries of specially Heavy type water poof Dust proof integral luminaries fitting provided with 8 nos 150 Watts LED Light fitting Higher end make with 150W LED Bulb with drives, Alglas coated reflectors, with cable connection etc. complete as per standard specification. |
| 4 | Supply and erection of 8mtr. Single arm bracket octagonal pole of free standing with continuously tapered structure made up of HT sheet steel designed to withstand wind velocity as per IS – 875 hot dip galvanized both internally and externally confirming to BESN. ISO 1461 (65 micron thickness). The octagonal pole shall be erected on concrete foundation with bolt of suitable size and HT steel pole having a base plate of suitable size with locking arrangements at the bottom along with 1 mtr Single Arm bracket with following pole specification. Height of pole: 8000 mmBottom dia:130 mm Top dia : 70 mmThickness: 3 mm Bracket : 1000 mm |
| 5 | The octagonal pole with Single arm bracket having 1 No of 120W LED Street light with collar pipe having 350 mm length welded suitably with bracket and fixed rigidly with 4 Nos Bolt and nuts to prevent any turning movement of bracket due to wind by Clamping on Bridge Wall with PCD Adaptor with necessary service wires from fuse box to the fitting with 1.5 sqmm PVC insulated copper wire with necessary connection. The junction box provided with 1No 4 way Connector with Hylum sheet with 1No 6 A SP MCB with backlite sheet and standard type terminal with connections complete, Testing and commissioning as directed by the departmental officers. |
| 6 | Supply and erection of 8mtr Double arm bracket octagonal pole of free standing with continuously tapered structure made up of HT sheet steel designed to withstand wind velocity as per IS – 875 , hot dip galvanized both internally and externally confirming to BESN. ISO 1461 (65 micron thickness) .The octagonal pole shall be erected on concrete foundation with bolt of suitable size and HT steel pole having a base plate of suitable size with locking arrangements at the bottom along with 1 mtr Double Arm bracket with following pole specification.Height of pole: 8000 mm Bottom dia:130 mm Top dia : 70 mmThickness: 3 mm Bracket : 1000 mm |
| 7 | The octagonal pole with Double arm bracket will have 1 No of 120W LED Streetlight and 1No 80W LED Street Light with collar pipe having 350mm length welded suitably with bracket and fixed rigidly with 4 Nos Bolt and nuts to prevent any turning movement of bracket due to wind by Clamping on Bridge Wall with PCD Adaptor with necessary service wires from fuse box to the fitting with 1.5 sqmm PVC insulated copper wire with necessary connection. The junction box provided with 1 No 4 way Connector with Hylum sheet with 1 No 6A SP MCB with backlite sheet and standard type terminal with connections complete. Testing and commissioning as directed by the departmental officers. |
| 8 | Supply and Clamping of 4 x 16 sq mm PVC LTUG armoured cable through 32 mm dia GI pipe(Class-B) on post or on wall with Clamps . |
| 9 | Supply, erection, testing and commissioning of Dust and Vermin Proof Outdoor Pillar box for Three phase Automatic street light controller of suitable size made up of 16 SWG CRCA Sheet with outer body with doors, Supports, Separations, Canopy etc., With suitable angle iron base for housing three phase 63A 4way Vertical DB, Digital Weekly Programmable Timer Switch with Shortest Switching Time One Minute With Battery Back Up, 63A three Phase Contactor, Etc. Confirming IE Rules and Standards and Supply and Fixing of Vertical Type 4 Way Triple Pole and Neutral MCB DB in Sheet Steel Enclosure Double Door Metal Cover with IP 42 Protection with 1 No 63A 4 Pole MCB as incoming and 4 Nos 32A TP MCB as Outgoing with earth Connection and with necessary Internal Wiring. |
| 10 | The Pillar Should be Provided with Lock and Key Arrangements and with one Coat of red Oxide Primer Paint and Two Coats of Simens Grey Approved by Department Officers along with Danger Board, Supersciption (Lettering and Numbering) and The Pillar Box Should be Mounted with suitable angle iron frame work on concrete foundation with necessary Bolts and Nuts etc. |
| 11 | Supply and fixing of 1 No.M.S Pillar box of suitable size made up of 16 SWG MS sheet for outer body and mains chamber with angle iron frame work of suitable size for outer frames and intermediate supports for mains chamber and bottom supports. The Pillar box should be mounted on suitable foundation concrete on ground with one coat of red oxide and two coats of Synthetic Enamel paint with lock and key arrangements and DANGER board and necessary superscriptions complete for housing 63A meter board and 4 pole MCB in SS Enclosures. |
| 12 | Supply and fixing of TNEB meter board suitable for three phase 63 A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size of 11/2 '' x 11/2 ''x1/4'' rigidly fixed on wall covered with Hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63 A fuse unit(500V) , 1 No neutral link copper earth flat of size 1\\"x1/4 \\" with interconnection of EB meter to fuse unit by 16 sq.mm PVC insulated copper wire with 1 No 63 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection with earth connection complete. |
| 13 | Supply and fixing of 63 A TPNMC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only |
| 14 | Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 15 | Supply and clamping of 3-1/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps |
| 16 | Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC LTUG armoured cable with earth connection |
| 17 | Supply and providing cable end termination of 3-1/2x35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete |
| 18 | Earthing as per the ISI specification with an earth electrode of 2.1 metre class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry . |
| 19 | Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection. |
| 20 | Supply and run of 1 of No.8 SWG GI wire for earth connection. |
| 21 | Add GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender