Tender For Constructing 11 Kv Double Circuit Line From Pallikkodi To Pillaveedu Under Electrical Section Thevalakkara
Tender Value
8.72 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
8 days left
EMD
21900
Bank guarantee accepted
Document Fee
2124
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kollam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Constructing 11 Kv Double Circuit Line From Pallikkodi To Pillaveedu Under Electrical Section Thevalakkara
BOQ
| Sl. No. | Item Description |
| 1 | LABOUR |
| 2 | (451) Disconnecting and lowering down thesingle phase WP service connection withguy wire from the OH line and reconnecting the same after completing the line work. |
| 3 | (452) Disconnecting and lowering down thethree phase WP service connection withguy wire from the OH line and reconnecting the same after completing the line work. |
| 4 | (565) Dismantling (without damage) one kmLT single phase 2 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly. |
| 5 | (566) Dismantling (without damage) one kmLT three phase 4 wire OH line conductorby dismantling cross arms, insulatorsand stacking the conductors in rollsproperly. |
| 6 | (567) Dismantling (without damage) one kmLT additional conductor line by dismantling cross arms, insulators and stacking the conductors in rolls properly. |
| 7 | (555) Dismantling (without damage) LT stayincluding digging pit in all classes of soiland backfilling. |
| 8 | (559) Dismantling (without damage) one LTPSC/RCC Strut pole including removalof clamps and stacking. |
| 9 | (554) Dismantling (without damage) one LTPSC/RCC pole after disconnecting stays,strut etc. attached thereon and stackingthe same. |
| 10 | (504) Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same. |
| 11 | (515) Dismantling (without damage) one V cross arm/Channel cross arm from existing Pole and bringing back to section store. |
| 12 | (513) Dismantling (without damage) one km11kV line (three conductors) includingdismantling cross arm, insulators, disc,disconnecting jumper connection, rollingthe conductor and stacking the materials. |
| 13 | (703) Labour charges for loading HT A type pole from the stacking place and unloading the same at work site (transportation by any vehicle). |
| 14 | (726) Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges. |
| 15 | (113) Fitting and erecting one HT A typeSingle Pole in position, including fittingcross arm, digging and back filling pit inordinary soil (as per standards), drawingsufficient length of GI earthing leadsfrom F clamp through V cross arm to theground for earthing (excluding provisionof earthing). |
| 16 | (112) Fitting and erecting one HT PSC Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing). |
| 17 | (119) Fitting and providing one HT Stay for11kV pole, including digging and backfilling pit in ordinary soil. |
| 18 | (327) Renewal of existing damaged/broken old 11kV Stay to the existing stay rod. |
| 19 | (120) Fitting and providing one Strut using HT PSC pole including digging and back filling pit in ordinary soil. |
| 20 | (171) Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP including conveyance of materials. |
| 21 | (167) Fitting one set AB switch on existingDP, giving connection and drawingsufficient length of GI earthing leads tothe ground for earthing, excludingprovision of earthing. |
| 22 | (517) Dismantling (without damage) one ABswitch from existing structure andbringing back to section store. |
| 23 | (174) Fitting one LT 2 line cross arm on HT or LT existing poles including fittinginsulators and binding the same with LTLine. |
| 24 | (175) Fitting one LT 4 line cross arm on HT or LT existing poles including fitting insulators and binding the same with LT Line. |
| 25 | (158) Providing one Driven Earth using GIearth pipe of size 38.1mm dia, 2.5mlength at minimum distance of 1.5maway from the pole/structure andmaintaining standard distance betweendifferent earth pipes in loose soil. |
| 26 | (215) Stringing, shackling, fitting cross arms,insulators and binding, giving jumperconnection etc. using ACSR Rabbit forPhase and ACSR Weasel for Neutral &Street Main, for one km LT 3ph 5 wireline including cutting and removing treebranches wherever necessary andconveyance of all materials (exceptpoles) from stacking place. |
| 27 | (135) Stringing of one km 11kV line withACSR Raccoon (3 conductors) afterfitting insulators and giving jumperconnections including cutting andremoving tree branches wherevernecessary excluding cut point works. |
| 28 | (30.1) Stringing of one km 3 PH 11kV linewith XLPE Insulated ACSR Raccoon orequivalant (3 conductors) after fittinginsulators, binding conductors to pininsulators using suitable tie andanchoring with wedge type anchoringclamps including cutting and removingtree branches wherever necessaryexcluding cut point works. |
| 29 | (405) Additional rate for refitting/redoing oneShackle Set, including reshacling onespan, while renewing any type of LTpole. |
| 30 | (324) Additional rate for refitting/redoing oneDisc set while renewing any type of11kV cut pole. |
| 31 | (610) Dismantling one ordinary streetlight/CFL/LED fitting from existing poleand refitting the same on newly erectedpole including disconnecting andreconnecting wires. |
| 32 | (170) Fitting one Additional 75x40mm, 1.8mChannel cross arm in existing single poleincluding conveyance of materials. |
| 33 | (568) Dismantling one section fuse from structure and bringing back to sectionstore. |
| 34 | (221) Fitting one No. Section fuse on LT linewith dropping cables, crimping sockets,connecting with bolt & nut etc. |
| 35 | (506) Dismantling (without damage) one 11kV A type pole after disconnecting stays, strut etc. attached thereon and stackingthe same. |
| 36 | (2018) Dismantling of 1.1 kV Aerial bunchedcable of size 3 x 70 + 1 x 16 (StreetLight) + 1 x 50 Sq.mm. (InsulatedMessenger) |
| 37 | (1105) Stringing of 1.1 kV Aerial bunchedcable of size 3 x 70 + 1 x 16+1x 50sqmm with bare/insulated Messengerthrough existing poles |
| 38 | Total of BoQ1 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender