Tender For Reconductoring Using Covered Conductor For Pozhikkara & Meenadu Feeder Under Electrical Section Paravoor
Tender Value
11.84 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
7 days left
EMD
29700
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Reconductoring Using Covered Conductor For Pozhikkara & Meenadu Feeder Under Electrical Section Paravoor
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 31-Jul-2026 | Date Corrigendum-1 | Date | 10-Aug-2026 |
| 2 | 11-Aug-2026 | Date Corrigendum-2 | Date | 31-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | LABOUR |
| 2 | (30.1) Stringing of one km 3 PH 11kV linewith XLPE Insulated ACSR Raccoon orequivalant (3 conductors) after fittinginsulators, binding conductors to pininsulators using suitable tie andanchoring with wedge type anchoringclamps including cutting and removingtree branches wherever necessaryexcluding cut point works. |
| 3 | (702) Labour charges for loading HT PSC polefrom the stacking place and unloadingthe same at work site (transportation byany vehicle). |
| 4 | (726) Transporting poles by hired vehicle to adistance upto 5km and carrying upto 4numbers of poles excluding loading&unloading charges. |
| 5 | (186) Insertion of one HT PSC pole in existingHT/LT line including digging & backfilling of pit in ordinary soil, fitting crossarm, insulator, binding etc. , drawingsufficient length of GI earth leads to theground for earthing (excluding provisionof earthing). |
| 6 | (112) Fitting and erecting one HT PSC SinglePole in position, including fitting crossarm, digging and back filling pit inordinary soil (as per standards), drawingsufficient length of GI earthing leadsfrom F clamp through V cross arm to theground for earthing (excluding provisionof earthing). |
| 7 | (513) Dismantling (without damage) one km11kV line (three conductors) includingdismantling cross arm, insulators, disc,disconnecting jumper connection, rollingthe conductor and stacking the materials. |
| 8 | (179) Additional rate for providing one HT Pinwith insulator, complete on any type ofHT pole. |
| 9 | (30.2) Providing bridging at Cut points for 3PH 11kV line with XLPE InsulatedACSR Raccoon or equivalent (1conductors) using IPC and respectiveconductors |
| 10 | (119) Fitting and providing one HT Stay for11kV pole, including digging and backfilling pit in ordinary soil. |
| 11 | (347) Straightening one slanted 11kV poleafter unbinding the line and binding theline after work. |
| 12 | (327) Renewal of existing damaged/broken old11kV Stay to the existing stay rod. |
| 13 | (405) Additional rate for refitting/redoing oneShackle Set, including reshacling onespan, while renewing any type of LTpole. |
| 14 | (419) Transferring LT single phase 2/3 wireOH line to newly erected HT/LT poleincluding dismantling existing cross armand insulators, refitting the same on thenew pole, binding etc. complete. |
| 15 | (420) Transferring LT three phase 4/5 wire OHline to newly erected HT/LT poleincluding dismantling existing cross armand insulators, refitting the same on thenew pole, binding etc. complete. |
| 16 | (451) Disconnecting and lowering down thesingle phase WP service connection withguy wire from the OH line andreconnecting the same after completingthe line work. |
| 17 | (452) Disconnecting and lowering down thethree phase WP service connection withguy wire from the OH line andreconnecting the same after completingthe line work. |
| 18 | (610) Dismantling one ordinary streetlight/CFL/LED fitting from existing poleand refitting the same on newly erectedpole including disconnecting andreconnecting wires. |
| 19 | (157) Providing one Earth using GI earth pipeof size 38.1mm dia, 2.5m lengthincluding digging separate pit(0.45x0.45x2.5m) at a minimumdistance of 1.5m away from thepole/structure and maintaining standarddistance between different earth pipes inordinary soil & backfilling. |
| 20 | (163) Providing one Coil Earth using No.8 GI-earth wire (50mm dia, 115 turns)including digging separate pit (0.45x0.45x1.5m) at standard distanceaway from the pole/structure in ordinarysoil & backfilling. |
| 21 | (127) Additional rate for excavation of one Pitfor HT Pole/HT Stay in Laterite. |
| 22 | (128) Additional rate for excavation of one Pitfor HT Pole/HT Stay in Hard Laterite. |
| 23 | (170) Fitting one Additional 75x40mm, 1.8mChannel cross arm in existing single poleincluding conveyance of materials. |
| 24 | (342) Renewing one V Cross arm on the 11kVPole including dismantling andconveyance. |
| 25 | (343) Renewing one 1.8m Channel cross armon the 11kV Pole including dismantlingand conveyance. |
| 26 | (175) Fitting one LT 4 line cross arm on HT orLT existing poles including fittinginsulators and binding the same with LTLine. |
| 27 | (185) Fitting one Additional 2.4m Channelcross arm in existing single poleincluding conveyance of materials. |
| 28 | (171) Fitting one Additional 2.4m/3m Channelcross arm (100x50x6mm), in existing11kV DP including conveyance ofmaterials. |
| 29 | (703) Labour charges for loading HT A typepole from the stacking place andunloading the same at work site(transportation by any vehicle). |
| 30 | (113) Fitting and erecting one HT A typeSingle Pole in position, including fittingcross arm, digging and back filling pit inordinary soil (as per standards), drawingsufficient length of GI earthing leadsfrom F clamp through V cross arm to theground for earthing (excluding provisionof earthing). |
| 31 | (952) Providing concrete muffing of size0.45x0. 45x1.5m (0.5m above GL and1m below GL). Excavation0.45x0.45x1m, concrete (1:3:6, 20mm)0.45x0.45x1.5m, Plastering (1:3) 12mm0.45x0.45mx5sides. |
| 32 | Total of BoQ1 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 31, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender