Tender For Survey, Design, Civil Redevelopment, Modern Interior Furnishing, And Commissioning Of The New Office For Chitrakoot Development Authority Under Deposit Work From District Mining Fund In Chitrakoot, Satna, Madhya Pradesh.
Tender Value
71.26 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
31 days left
EMD
71270
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Satna → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Survey, Design, Civil Redevelopment, Modern Interior Furnishing, And Commissioning Of The New Office For Chitrakoot Development Authority Under Deposit Work From District Mining Fund In Chitrakoot, Satna, Madhya Pradesh.
BOQ
| Sl. No. | Item Description |
| 1 | 65' Inch LED TV 2 Star LED (Light Emitting Diode) Ultra HD (3840 x 2160) TV |
| 2 | Projector Long Throw (above 2.5) Multimedia Projector (MMP) With 1920 x 1080 (Full HD) Resolution |
| 3 | Switch PoE IP30-rated Metal Industrial Switch, On Site OEM Warranty 1 year |
| 4 | Webcam and Meeting Mick Combine Unit People Link PTZ Function Video Conferencing Camera (High Precision Motorized-PTZ) Resolution (Maximum) each camera 4K HD (3840 X 2160 Pixel) |
| 5 | Laptop 1024 GB Storage Laptop - Notebook( i7 1355U Win11P 161SSD1 wifi 14) |
| 6 | HDMI Spilter HDMI (Female) to HDMI (Female) OTG (On-The-Go) Adapter/ Converter (8 PORT HDMI SPLITTER 4K 1 INPUT 8 OUTPUT) |
| 7 | All-in-One Desktop PC Intel Core i3-12100 All in One PC |
| 8 | Printer All in one A4 and Legal Colour Laser Computer Printer with Warranty |
| 9 | Colour Printer A3, A4 and Legal Colour Inkjet Computer Printer with Warranty |
| 10 | complete confrence hall setup HDMI Cables , floor movable TV stand , connectors, screen pointer, chain slider and Installation with Material etc copmplete setup as per direction of engineer-in-charge |
| 11 | LAN Setup for Office on both floor (1000 mtr apx- CAT6,16 port Switch,9u Rack,15-IO port) etc copmplete setup as per direction of engineer-in-charge |
| 12 | Executive Table (Front Table Meeting Hall) a free-standing, knocked-down table measuring 1800 x 750 x 725 mm with no storage, keyboard tray, or footrest. The 25 mm thick table top is made of three-layer prelaminated particle board (grade II type II) featuring a matte laminate finish, half-round post-form profile, and 2 mm PVC edge banding, while the 19 mm gable end and modesty panels are made of grade II type III boards. It comes with a 3-year warranty |
| 13 | Revolving Chair an ergonomic push-back chair featuring a one-piece injection-molded backrest, mesh fabric upholstery on a 45 kg/m3 density PU foam seat, and black 100% polyester fabric on the back. It includes fixed propylene arms, an ABS pedestal base with twin caster wheels, an overall height of 860 mm, up to 120 mm height adjustment, tilt tension adjustment, and a 3-year warranty |
| 14 | Ergonomic Executive Net High Back Chair features an inner frame upholstered with mesh fabric, a 45 kg/m3 density PU foam seat, an adjustable separate headrest, and adjustable steel arms covered with polyurethane. It sits on a chrome-finished pedestal base with 5 wheels, offers up to 120 mm height adjustment, and has an overall height of 1280 mm with a 3-year warranty |
| 15 | Executive Table 1200 x 600 x 750 mm free-standing desk made of 25 mm thick three-layer prelaminated particle board for both the top and modesty panels. It features a swede finish, half-round post-form long edges, PVC edge banding, no storage, and comes with BIFMA and ISO certifications alongside a 3-year warranty. |
| 16 | EXECUTIVE TABLE measures 1800 x 900 x 750 mm and is constructed from three-layer prelaminated particle board with a 25 mm thick top and modesty panel. It features wooden legs, a matte laminate finish, PVC edge banding, and BIFMA/ISO certifications, backed by a 3-year warranty. |
| 17 | Executive Table V J Interior large 2100 x 950 x 750 mm free-standing desk made of MDF board with a 38 mm thick top and a 25 mm modesty panel. Finished in a teak matte laminate, it includes triple storage units on both sides, wooden legs, PVC edge banding, BIFMA/ISO certifications, and a 3-year warranty |
| 18 | 5 Seater Sofa includes one 3-seater unit and two single-seater units with a partially upholstered 18 mm teak plywood frame. It features a teak polish finish on the exposed wood, 40 kg/m3 density foam cushions, fabric covering, an overall height of 800 mm (with back cushion), and a 3-year warranty |
| 19 | Rectangular Centre Table measures 914 x 609 x 430 mm and features a 12 mm thick flat glass top supported by a 19 mm carved teak wood frame and legs. It includes a single storage space underneath the top, a teak laminate/ply finish with polish, and a 3-year warranty |
| 20 | SS CHAIR 3 Seater Public Place Seating Chair is a red, 1800 x 800 x 800 mm unit made of 1.6 mm thick mild steel featuring perforated, cushion-less integrated seats and backrests. The arms, legs, and side bar brackets are made of cold-rolled steel with chrome plating, while the main structure features a 60-micron thick epoxy powder-coated enamel paint finish, backed by a 3-year warranty |
| 21 | Revolving Chair features an asynchronous mechanism with a 360-degree revolving type, upright locking, and up to 65 mm pneumatic height adjustment. It includes a nylon pedestal base, polypropylene armrests, adjustable lumbar support, leatherette upholstery over PU foam, and an overall width of 610 mm, with a 3-year warranty. |
| 22 | Steel Filing Cabinet features four equal-sized drawers with a central locking mechanism and a loading capacity of 200 kg. Made from 0.7 mm thick MS sheet and finished in grey powder coating, the cabinet measures 1300 x 475 x 600 mm and is packed in a five-ply corrugated board. |
| 23 | Fully Automatic ABS Plastic Hand Dryer is a wall-mounted, 500W unit measuring 240 x 240 x 241 mm and weighing 4 kg. It features a brush AC motor (15000-30000 RPM), delivering an air speed of 30 meters/second, a drying time of less than 15 seconds, a 30-second auto cutoff, an IP 4 protection class, and a 36-month warranty. |
| 24 | Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894 - 2002, class designation 50 (average compressive strength) in superstructure above plinth level up to floor 2 level including the cost of scaffolding : |
| 25 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 26 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 27 | Providing and applying 1.0 mm thick white cement based wall putty of best quality, over plastered surface to prepare the surface even and smooth complete. |
| 28 | Finishing walls with Acrylic Smooth exterior paint of required shade: |
| 29 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). |
| 30 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 31 | Cement concrete grade M-10 (Nominal Mix) with 20mm maximum size of stone aggregate |
| 32 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/Cum. Excess/less cement used as per design mix is payable/recoverable separately). |
| 33 | All work up to Plinth level |
| 34 | All work above Plinth level up to floor 2 level |
| 35 | Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for : |
| 36 | Centering and shuttering including strutting, propping etc.and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 37 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete. |
| 38 | Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 |
| 39 | Providing and laying vitrified floor tiles (without Soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS : 15622 of approved make in all colours & shades, Ist quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm as per manufacturer specification. |
| 40 | Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (8mm to 10mm thick) of 1st quality conforming to IS : 15622 of approved make in and colours laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 41 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C.Indian type PVC flushing cistern |
| 42 | White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests Size 580x440mm |
| 43 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. European type PVC flushing cistern |
| 44 | W.C. pan with ISI marked white solidplastic seat and lidWhite plastic seat cover and lid |
| 45 | Providing and fixing in position best Indian Health Faucet with 8mm dia 1 meter long Flexible Tube and wall bracket with N. R. V. (non-return valve).(Premium Range Sanitary Ware) |
| 46 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required : |
| 47 | Single half stall urinal with 5 litre P.V.C. automatic flushingcistern. |
| 48 | Providing and fixing toilet paper holder :C.P. brass |
| 49 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 50 | 15 mm nominal bore, 122mm long. Weighing not less than 99 gms |
| 51 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour.weighing not less than 105 gms. |
| 52 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washerscomplete. |
| 53 | Providing and fixing factory made UPVC door frame made of UPVC extruded section having an overall dimension as below (tolerance ±1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be mitred and welded of plastic, galvanized brackets and stainless steel screws. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge |
| 54 | Extruded section profile size 48x40 mm. |
| 55 | Providing and fixing to existing door frames. |
| 56 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm ± 0.2 mm with inbuilt decorative moulding edging on one side. The styles and rails mitred and joined at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm ± 0.1 mm wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100x30 mm and 2 mm ± 0.2 mm wall thickness fixed to the shutter styles by means of plastic/ galvanisedM.S. 'U' cleats. The shutter frame filled with a UPVC multi- chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ± 0.1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. |
| 57 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making goodthe walls wherever require : |
| 58 | White Vitreous China Flat back wash basin size 550x400 mm withsingle 15 mm C.P. brass pillar tap. |
| 59 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. |
| 60 | Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. |
| 61 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. |
| 62 | 15 mm nominal outer dia .Pipes. |
| 63 | 25 mm nominal outer dia .Pipes. |
| 64 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work |
| 65 | 32 mm nominal outer dia .Pipes. |
| 66 | 40 mm nominal outer dia .Pipes. |
| 67 | 50 mm nominal outer dia .Pipes. |
| 68 | Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. |
| 69 | 160 mm diameter OD |
| 70 | Providing and fixing unplasticised PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. |
| 71 | 75 mm diameter (minimum wall thickness 3.2mm) |
| 72 | 110 mm diameter (minimum wall thickness 3.2mm) |
| 73 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (6 to 7mm thick) of approved make in all colours, shades of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry including pointing in white cement mixed with pigment of matching shade complete. |
| 74 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge |
| 75 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 76 | Pre-laminated particle board with decorative lamination on bothsides. |
| 77 | Providing and fixing and applying plaster of paris (POP) false ceiling consisting of frame work made with 50 mm sq. M.S tubes of 18 G thickness as main runners at 600 mm c/c both ways, suspended/supported with M.S flats 25 x 4 mm from existing R.C.C slab including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thickness welded to main runner and applying POP (Calcium sulphate semihydrate variety) to the expanded metal of thickness not less than 10mm finished smooth to line and level including necessary supports scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over theM.S frame work and suspenders complete. |
| 78 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters using following hinges. |
| 79 | 35 mm thick including ISI marked Stainless Steel butt hinges withnecessary screws. |
| 80 | Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters to IS : 2202 Part-1 on one side only. |
| 81 | Providing and fixing ISI : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. |
| 82 | Acoustic wall panelling soak coard of fabric wrapped wood fiber panelsProviding and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. The GI strut systems includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges 15mm is fastened to wall positioned vertically in a regular manner at 600mm c/c.GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. |
| 83 | Heterogeneous 3.25mm thick acoustic PVC vinyl flooringProviding and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment (sanitized), reinforced, total weight is 3240g/m2 approx. (EN 430), abrasion group T (EN660-1,660-2), dimentional stability <0.10% (EN-434), reaction to fire (EN 13501-1) Bfls1 on fibrecement substrate, static indentation (EN 433: 0.12mm), castor chair test qualified –no damage (EN-425), furniture leg test qualified (EN 424)-no damage, underfoot comfort (EN 433) ≥ 0.40mm, impact sound reduction(EN ISO 140-8,EN ISO 717-2 )Δlw19Db, acoustical improvement (NF S31- 074)-class A, certficate NF UPEC.A+(NF 189) - registered, no formaldehyde emission (EN 717-1), no pentachlorophenol (EN 12673), 100% recyclable (eco-friendly), includes 26% of recycled content, includes 52% natural product, low VOC emissions after 28days of installation (lower than ≤100μg/m3), static effect(EN ISO 846) - sanitized, chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc |
| 84 | Providing and fixing of carbon-di- oxide type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube 30 cm long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. |
| 85 | Capacity 4.5 kg |
| 86 | Providing and fixing of ABC Power type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube 30 cm long high pressure discharge hose, discharge nozzle, suspension bracket. Conforming to IS: 15683 finished externally with red enamel paint fixed to wall with brackets complete with internal charge. |
| 87 | Capacity 6.0 kg |
| 88 | Supply of recessed mounting type Led light fixture, LED of 1 to 3 W each assembled on single MCPCB, having color temp 6500K & having 50000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy>80lm/W. LEDdriver, PF 0.95 & THD < 20%. The colour rendering indexof LED light should be more than 70. Housing made ofCRCA with glare free diffused polycarbonate cover. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory i/c connection wire, testing etc.to complete the job. 2 Yrs Guarantee certificate frommanufacturer. |
| 89 | Led luminiare 1' X 1', 24W , 4-6.5k |
| 90 | Led luminiare 2' X 2', 36W, 4-6.5K |
| 91 | Supply, installation, testing and commissioning of diesel generating set three phase, air cooled with AMF control panel, 40 KVA, 415V. |
| 92 | Modular Type PVC BoxSupplying and fixing of approved make modular type P.V.C. box with modular base and cover plate including fixing on surface excluding switch, socket etc. as required for;3 module |
| 93 | 4 module |
| 94 | Electric Ceiling FanSupplying, erection and testing of approved make electricCeiling fan of double ball bearing complete with standarddown rod, canopy, hanging shackle, Aluminium blades,without regulator, A.C. 230-250 volts including connectionswith all necessary material complete of approved as requiredconfirming to IS :374/2019 with upto date amendments.Ceiling Fan (5 star & ISI)-1200 mm Sweep |
| 95 | Modular Electronic Fan RegulatorSupplying and fixing of approved make step type Modular electronic Fan regulator including connection etc. as required on existing board100 Watt (2 module) |
| 96 | Exhaust Fan (Heavy Duty)Supplying, erecting and testing of approved make exhaust fanheavy duty with mounting frame, blades AC 230-250complete connection and including, frame bolt/anchor holefasteners etc. complete finished and as required.300mm sweep 900/1400 RPM |
| 97 | Exhaust Fan LouversSupply and fixing of GI sheet 24 SWG exhaust fan louversincluding grouting bolt, nut, & finishing etc. on existing hole tocomplete the job as mentioned below :-Sweep 300mm |
| 98 | Circuit wiring 2.5Sq. Wiring for circuit wiring with PVC insulatedcable FRLSwithcoppermulti strand conductor ISI marked in concealed rigid steel conduit of ISI marked suitablesize includingpainting etc. as required as per specification 2x2.5 Sq.mm |
| 99 | 4x2.5 Sq.mm |
| 100 | XLPE insulated power cable, al. conductor Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½core/4 core ISI marked with alu. stranded /solid conductor |
| 101 | 4 core armoured 16 sq. mm. |
| 102 | SPLIT AC (inverter model, Cooling only) SPLIT AC (inverter model, Cooling only) |
| 103 | 46.11.2.3 1.5 TR, 3 star 1.5 TR star rating 3 star |
| 104 | 1.8 /2 TR, 5 star 1.8/2 TR star rating 5 star |
| 105 | Supply, installation, testing and commissioning of Conference Delegate Unit Nominal Acoustic Input at the microphone 85dB SPL Frequency Response 400Hz to 10Khz. Length of the microphone from the base of the stem 488mm or more |
| 106 | Supply, installation, testing and commissioning of Conference Control unit Frequency response 200Hz to 12 kHz Input Impedance 4.7kohm Rated output Impedance 1 kohm Equaliser Center frequencies of filters 250Hz, 2kHz and 8kHz Mic input sensitivity 1mV (+1/-3dB) Aux input sensitivity 100mV (+1/-3dB) |
| 107 | 40W wall mount with max SPL 1M/1W 86dB Supply, installation, testing and commissioning of 40W wall mount with max SPL 1M/1W 86dB. Frequency response of 100Hz-20KHz with a dispersion angle of 160 deg. The speaker should have tapings at 40W/20W/10W (with require mounting arrangement |
| 108 | HDMI connector & braided cord Supply, installation testing and commissioning of High-Speed HDMI corrosion-resistant connector & braided cable, Supports Ethernet, 3D, 4K video, computers and other HDMI-enabled devices Black as required to complete the job as mentioned below 5 Metre, HDMI cord Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 31 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 32 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender