Tender For Providing Of 02 X Shed For Cook House Of Bldg No P-136 And P-137 And Provn Of Washing Point And Tiling Work In Cook House Bldg No T-412 In Zone K At Mil Stn Agartala
Tender Value
9.48 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
8 days left
EMD
18960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
agartala → Tripura
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of 02 X Shed For Cook House Of Bldg No P-136 And P-137 And Provn Of Washing Point And Tiling Work In Cook House Bldg No T-412 In Zone K At Mil Stn Agartala
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar complete all as specified and as directed. |
| 2 | M&L for Cement concrete Type B2 1:3:6 (40 mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts complete as Specified and as directed |
| 3 | M&L Brick work with sub class B bricks straight or curved on plan exe 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed |
| 4 | M&L 15mm thick rendering in CM (1:4) on brick work/ concrete surfaces in two layers (10mm backing coat and 5mm finishing coat mixed with integral water proofing compound @ 3% by wt of cement,) finished even and fair complete all as specified and as directed.(Note: Water proofing compound measured & paid separately) |
| 5 | Supply only liquid water proofing compound |
| 6 | M & L for preparation of new plastered surfaces and applying two coats of cement base paint over new plastered surfaces with a coat of primer complete all as specified and as directed |
| 7 | M&L for applying one coats of cement base paint white or tinted on old wall surface including preparation of surface complete all as specified and as directed |
| 8 | S & F framed brackets of angles or tees for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc incl all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 all as specified and as directed |
| 9 | S & F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long, diameter of neck 5 to 10 mm all as specified and as directed |
| 10 | M&L for Preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed |
| 11 | S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with selp tapping screw complete all as specified and directed. |
| 12 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed |
| 13 | M&L mild steel work such as grills, guard bars etc and similar work conforming to Fe290 GDE E-165 complete all as specified and as directed. |
| 14 | M&L for preparation of new steel Surfaces of any description, n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specifiedComplete all as specified and directed. |
| 15 | Material and labour 75 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in plinth protection finished fair and even w/o using extra cement and making groove of 10mm width at every 3m intervals and at diagonals and filling the joints with bitumen mastic( a mix of bitumen and sand in 1:1 by weight) complete all as specified and directed. |
| 16 | Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and as directed. |
| 17 | Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil complete as specified and as directed. |
| 18 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete as specified and as directed. |
| 19 | M & L for hardcore of broken bricks of gauge not exceeding 63 mm , deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface. |
| 20 | S&F Steel work in tubular trusses and vertical posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and as directed |
| 21 | S&F Rolled mild steel purlins ,crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.Gde Fe410-0 or Fe 310-O complete as specified and as directed. |
| 22 | Material & Labour non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.18sqm but not exc 0.38 sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar in cm 1:4 for laying floor tiles,complete all as specified and as directed. |
| 23 | Material & Labour non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.18sqm but not exc 0.38 sqm in Skirting / Daddo etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 10mm thick bedding layer of mortar to wall in cm (1:4) for laying tiles on skirting/dado complete all as specified and as directed. |
| 24 | M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate complete as specified and as directed. |
| 25 | M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified and as directed |
| 26 | M&L for one coat of synthetic enamelled paint on steel surfaces over 10 cm width or girth including preparation of old surfaces. |
| 27 | M&L 25 thick P.C.C (1:2:4) type B-0 using 12.50 mm graded stone aggregate as in floor finished rough complete all as specified and as directed. |
| 28 | M&L for providing 100 mm thick cement concrete type C-2, 1:3:6 using (40 mm graded brick aggregate) as in path or paveway finished rough without using extra cement complete all as specified and directed. |
| 29 | M& L Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors and cut and polished with grey cement and pigments over 15 mm thick (1:6) scred bed complete all as specified and as directed. |
| 30 | M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed |
| 31 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) as rough finished surface complete all as specified and as directed. |
| 32 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed |
| 33 | M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick cement plaster (1:4) including rounded the exposed surfaces of granite complete all as specified and as directed. |
| 34 | M&L Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls, built in cm 1:4 complete all as specified and as directed |
| 35 | M&L applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) with preparation of new plastered surfaces complete all as specified and directed. |
| 36 | M&L 10 mm thick rendering in CM (1:6) on than fair faces of brick work or concrete surfaces without using extra cement complete all as specified and as directed. |
| 37 | M & L for preparation of new plastered surfaces by applying 1mm thick wall care putty and applying two coats of oil bound distemer over a coat of primer on new plastered surfaces complete all as specified and as directed. |
| 38 | S&F low density polythene (LDPE) pins of pressure rating 6 Kg/Sq cm bore of tube 32 mm for waste pipe of WHB sinks etc.complete all as specified and as directed |
| 39 | S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed . |
| 40 | S&F for 600X450mm long bevelled edge mirror of selected quality glass mounted on 6mm thick AC building borad or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers with sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long all as specified and directed. |
| 41 | S&F 15 mm stop valves (angular type), cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed . |
| 42 | S&F 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes complete all as specified and as directed. |
| 43 | S& F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 44 | Supply and fix 20mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and as directed. |
| 45 | Supply and fix 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and as directed. |
| 46 | Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wallcomplete all as specified and as directed |
| 47 | Supply and fix with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm and waste fittings 40 mm dia, brass, chromium plated for glazed ware sinks,basins,etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed. but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 48 | Supply and fix 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls only integral water proofing compound complete all as specified and as directed |
| 49 | Supply and fix 110 mm bore PVC (SWR) bends in any types complete all as specified and as directed. |
| 50 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender