Tender For Special Repair To Building No P-09( 01 To 04) Or Md Accn In Sarvatra Enclave At Janglote Under Ge Basoli
Tender Value
24.18 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
7 days left
EMD
48360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No P-09( 01 To 04) Or Md Accn In Sarvatra Enclave At Janglote Under Ge Basoli
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Jul-2026 | Corrg No 01 | BOQ | 05-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n exc 1.5 m wide and nexc 1.5 m in depth for foundation of pole/stay and laying of UG cable/GI pipe and getting out in any type of soil complete all as specified and directed. |
| 2 | M&L returning, filling and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed. |
| 3 | Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5mtr above the starting point, complete all as specified and directed. |
| 4 | M&L TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 5 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed. |
| 6 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed. |
| 7 | Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 Sqm each complete all as specified and directed. |
| 8 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). |
| 9 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter decorative type, of 30 mm size comprising of virgin polymer of K value 58-60 ,calcium carbonate and natural fibre and non toxic additives minimum compressive strenth 50 N/ mm2 ,modulas of elasticity 850 n/ mm2 and resistance to spred of flame of Class A cateegory with property of being termite /borer proof ,water /moisture proof and fire retardant . WPC to be Laminated with PVC foil of minimum 14 microns thick of approval design pasted with hot melt adhesive on both faces of shutter and fixing with stainless butt hinges of required size with neccessary full body threated star headed counter sunk s.s screw shall ,all as per direction of enginner In charge. |
| 10 | M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete of frame size 105 x 60 mm complete all as specified and directed . |
| 11 | M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete of frame size 125 x 60 mm complete all as specified and directed. |
| 12 | M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed. |
| 13 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed . |
| 14 | S&F For Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with sash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a) complete all as specified and directed. |
| 15 | Supply and fixing in Repair 18 to 20mm thick (weight not less than 10.5 Kg/Sqm) including magnetic catcher PVC Ultra Violet chemical, glossymate finish 100% termite/water proof, fire retrandent eco friendly solid board both side decorative choice laminate as in kitchen cabinet, loft cupboard etc fixed with screws to steel/timber frame work etc Complete all as specified and directed. |
| 16 | S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed. |
| 17 | S&F for 100 mm butt hinges,Stainless steel complete all as specified and directed complete all as specified and directed. |
| 18 | S&F stainless steel barrel tower bolts 150 mm long of extruded section fixed with stainless steel screws, ISI marked, complete all as specified and directed. |
| 19 | S&F Stainless steel handle,150 mm size. complete all as specified and directed. |
| 20 | S&F aluminium alloy, anodised ,sliding door with hasp and size 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and directed. |
| 21 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised.Width of flaps (when open) is 30mm complete all as specified and directed. |
| 22 | Supply & fixing 100mm size hasp and staple aluminium anodised, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 23 | S & F floor stopper 150mm length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 24 | S&F For Powder coating aluminium window and ventilator shutters, side hung type without sash bars, with one side wire gauged shutter aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges 2 Nos, suitable handle 2 Nos, tower bolt 2 Nos in Each Shutter Incl GI Wire Mesh Complete all as specified and directed by Engineer-in-Charge. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.) |
| 25 | S&F For Powder coating aluminium window and ventilator shutters, side hung type without sash bars, with one side Glass shutter aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges 2 Nos, suitable handle 2 Nos, tower bolt 2 Nos in Each Shutter Including 5mm thick Glass Complete all as specified and directed by Engineer-in-Charge. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.) |
| 26 | S& F mild steel Peg set of six hooks size 50mm to 60mm complete all as specified and directed. |
| 27 | M&L for preparation of treated/un-treated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed . |
| 28 | Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and dispose off rubbish to a distance not exc 50m complete all as specified and directed. |
| 29 | M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 30 | M&L for preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed . |
| 31 | Material and labour for plain cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 32 | M & L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg), top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed. |
| 33 | M&L for Roof Treatment with the following specification - Removing existing water proofing treatment and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished.NOTE :- MOU to be submitted by the contractor beore starting of work with the authorised applicator by the OEM of APP membrane duly recommended by Engineer-in-charge |
| 34 | M&L For 15mm thick screed bed or bedding layer in CM 1:4 with Water proofing Compound at roof top surfaces for smoothening surface of laying APP Membrane complete all as specified and directed.(Note :- WPC shall be measured and paid separtely). |
| 35 | M&L For Preparation of Roof Surfaces and two coat of Aluminium Paint on APP Membrane of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed. |
| 36 | S&F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 37 | S&F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 38 | S&F PVC (SWR) Bends in any radius 110 mm bore with access door in repair complete all as specified and directed. |
| 39 | S&F PVC (SWR) Bends in any radius 75 mm bore with access door in repair complete all as specified and directed. |
| 40 | S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed |
| 41 | S&F in repairs for 110mm dia bore PVC SWR branch piece single (Double Y) equal or unequal complete all as specified and directed. |
| 42 | S&F in repairs for 75mm dia bore PVC SWR branch piece single (Double Y) equal or unequal complete all as specified and directed. |
| 43 | S&F PVC (SWR) Vent cowl 110 mm bore in repair complete all as specified and directed. |
| 44 | S&F PVC (SWR) Reducers 75 mm bore in repair. complete all as specified and directed. |
| 45 | S&F PVC (SWR) 'P’ trap 110 mm bore in repair.. complete all as specified and directed. |
| 46 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 47 | M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank, non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical tanks with closed top,specific wt shall be 25 gm/ltr), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed. |
| 48 | S&F in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type long body with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all complete all as specified and directed. |
| 49 | S & F in repair 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 50 | S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges complete all as specified and directed. |
| 51 | S&F in Repair brass CP mixer for mixing hot and cold water screwed down for iron pipe, 15 mm bore complete all as specified and directed. |
| 52 | S&F in Repair brass CP mixer for mixing hot and cold wash hand basin screwed down for iron pipe, 15 mm bore complete all as specified and directed. |
| 53 | S&F in repair flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc.complete all as specified and directed. |
| 54 | S&F in repair Vitreous china wash basin white , flat back size 300 X 300 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed |
| 55 | S&F in repair Vitreous china wash down water closet (pedestal pattern) including plastic seat cover white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinges device all complete and as directed. |
| 56 | S & F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc, complete all as specified and directed. |
| 57 | Supplying and laying of outer dia 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 58 | S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed |
| 59 | Refixing only of 15mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed |
| 60 | Refixing only of 20mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections including cutting/chiesling of brick/concrete surface and making good as per existing complete all as specified and directed |
| 61 | Supply and fixing in repair stainless steel curtain rods 20mm dia powder coated with brackets, corner & fineals complete all as specified and directed. |
| 62 | Demolition cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 63 | Demolition of reinforced cement concrete of any description complete all as specified and directed. |
| 64 | M&L for 75 mm thick PCC type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 65 | M&L machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment over and including 50mm thick layer of sand filling complete all as specified and directed. |
| 66 | M&L for 10mm thick rendering/screeding on fair faces of brick/concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed. |
| 67 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 68 | M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed. |
| 69 | M&L Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but n . Exc 0.38 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 70 | M&L For Non-skid Ceramic tiles 8 to 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match includingTaking down cement plaster/tile on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles. complete all as specified and directed. |
| 71 | M&L Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but n . Exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 72 | M&L for Machine cut kota slab flooring 18 to 20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes including Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed. |
| 73 | M&L for Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed |
| 74 | M&L Terra kota tiling 10mm thick set and jointed with grey cement with pigment and pointed with neat cement slurry in chajjas over 15mm thick screed bed in CM 1:4 over PCC coping 1:3:6 type C-1 (using 20mm graded agg) , complete all as specified and directed |
| 75 | M&L Granite of black Colour any type 20mm thick machine cut as in cooking plateforms and over 20 mm screed bed in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling Stone Slabs and Tiles of any description or thickness in floors, apron etc Laid bedded and pointed in any mortar complete all as specified and directed. |
| 76 | Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform and other similar situations etc complete all as specified and directed. |
| 77 | M&L for rendering 15mm thick in cement mortar 1:6, on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement, preparation of new plastered surfaces of walls and applying 3mm thick wall care putty and two coat oil emulsion distemper on walls including taking down old cement plaster on walls complete all as specified and directed . |
| 78 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 79 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed |
| 80 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and directed |
| 81 | M&L For preparation of new Plastered surfaces and applying two coats of Acrylic emulsion ( Apex ) over a coat of primer/ wall putty complete all as specified and directed. |
| 82 | M&L For complete removal of existing treatment and preparation of old plastered surfaces and applying two coats of Acrylic emulsion ( Apex ) over a coat of primer/ wall putty complete all as specified and directed. |
| 83 | S&F in repair stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe. complete all as specified and directed . |
| 84 | S&F long shank concealed type stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe. complete all as specified and directed . |
| 85 | S&F Fancy type health faucet with 8mm dia 1mtr long flexible tube (back flow preventer), chromium plated of 15mm bore, all as specified and directed. |
| 86 | S&F in repair chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed. |
| 87 | S&F CP Soap dish fancy type complete all as specified and directed. |
| 88 | S&F in Repair Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partitions as per sample. The over all size (60x60x22cm) fixed with steel fastners or steel screw complete all as specified and as directed. |
| 89 | S&F in repair Sinks made of stainless steel 1 mm thick kitchen with plugs ,washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe overall size 495mm X 420 mm bowl size 410mm X 330mm X 160 mm all complete (sink to be fixed in granite after cutting the granite stone to required shape) complete all as specified and as directed. |
| 90 | M&L for Cement Concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 91 | M&L for concrete bed to drain pipes laid in trenches incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregates) for 150mm bore of pipe complete all as specified and directed |
| 92 | M&L for Reinforced concrete pipes150mm, class NP-3, laid and jointed complete with collars bed complete incl testing all as specified (Concrete to be measured and paid for separately) complete all as specified and directed |
| 93 | Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed. |
| 94 | M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement including mixing of WPC complete all as specified and directed. (Note: WPC shall be measured and paid seperately as supply only}. |
| 95 | M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 96 | M&L for Reinforced cement concrete M-20 (Nominal mx) using 20mm graded crushed stone aggregates as in slabs/shelves, supported on walls, beam and columns in floors, and in shelves and the like complete all as specified and directed |
| 97 | M&L for Precast Cover Slab, Gray Steel Fiber reinforced concrete 600x600x75mm Medium duty solid cover with frame complete all as specified and directed |
| 98 | M & L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed |
| 99 | M&L 75 mm thick PCC, type C-2, 1:3:6, ( using 40mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without nusing extra cement. complete all as specified and directed |
| 100 | M&L for rendering 5 mm thick in CM (1:3) finished surface even and smooth w/o using extra cement in ceiling. and applying three coats of white wash on ceiling complete all as specified and directed |
| 101 | M&L for preperation of old plastered surface and applying two coats of white wash on ceiling complete all as specified and directed |
| 102 | Supply only integral Water Proofing Compound. complete all as specified and directed |
| 103 | M&L for complete removal of existing surfaces of walls and applying 1mm thick wall care putty and two coat oil emulsion distemper on walls complete all as specified and directed . |
| 104 | Taking down ,dismantling of broken/loose portion of chajja , facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork/scffolding and matching with existing surface of facia (including white wash /colour wash or cement base paint) chajja upto 2nd floor complete all as specified and directed |
| 105 | M&L for PCC 1:5:10 type E-2 (using 40 mm graged crushed stone aggregate) as in foundation filling and mass concrete (sunken floors etc) complete all as specified and drected |
| 106 | M&L for Rendering 15mm on bricks work or concrete surface in CM 1:4 with and including water proofing compound to sunken portion with proper slope toward out side and finishing cement or brick work surface even and smooth using extra cement including application of 90 micron polythene film and applying bitumen coating @ 3.00 Kg/Sqm (WPC shall measured and paid separately)complete all as specified and directed. |
| 107 | Supply and laying for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 Volts grade, of size 25 Sqmm, 4.00 core and taking down old/brunt out electric cable any size and rating complete all as specified and directed.Note: Earth work including excavation, returning filling, removing, sand cushioning, GI pipe,brick covering for mechanical protection of cable etc will be measured and paid separately under respective items of BOQ |
| 108 | Supply & laying of approved quality sand under cable upto 15cm before laying the cable and 8cm over the cable after laying, punned down to overall thickness of 18cm in trenches for cable cushioning complete all as specified and directed. (Punned thickness shall be measured) |
| 109 | Material and labour for well burnt, old size Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable with width equal to length of brick complete all as specified and directed . |
| 110 | Supply and laying in trenches/under roads/under floor/on walls in new position tubing GI Light grade of 40 mm nominal bore of pipe with screwed sockets joints (such as bends, elbow, tees, etc) complete all as specified and directed. |
| 111 | Suppy and fix gate valve 25mm dia PPRl gate valve conforming to IS for PPR pipe complete all as specified and directed. |
| 112 | S&F 25mm dia concealed pipe 3-layer PP-R Po l y p r o p y l e n e random copolymer)concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.including taking down existing pipe complete all as specified and directed. |
| 113 | Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed. Please Enable Macros to View BoQ information |
| 114 | Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender