Tender For Certain Petty B/R Repairs Day To Day Maintenance Of Ph-I Area Under Ge Narangi
Tender Value
25 Lakhs
Estimated cost
Bid Submission
04 Aug 2026
18 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain Petty B/R Repairs Day To Day Maintenance Of Ph-I Area Under Ge Narangi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Shutters of any description n exc 1 sq. m each removing to store complete all as specified and as directed. |
| 2 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each removing to store complete all as specified and as directed. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm including builders hardware each complete all as specified and as directed. |
| 4 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed. |
| 5 | Taking down shutter of any description exc 1 sqm but nexc 2 sqm each leaf and refixing in same opening after cutting or eased the same complete all as specified and as directed. |
| 6 | Hacking out old broken glass (any thickness, quality or description) from wooden frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 7 | Taking up or down GI tubing 15 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed. |
| 8 | Taking up or down GI tubing 20 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed. |
| 9 | Dismantling PVC (SWR) pipe of any description complete all as specified and as directed. |
| 10 | Demolition of concrete in ground floors and pavings exc 15 cm thickness ( below or above ground level) & also removing the debris to the out side of MD land complete all as specified and as directed. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed. |
| 12 | Taking down cement plaster/cement mud plaster on brick walls etc, incl racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 13 | Material and labour for Plain cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate for fixing holdfast complete all as specified and as directed. |
| 14 | Material and labour for cement concrete 1:3:6 type C-2 , (20 mm graded stone agg) as in foundation filling and sunken floors etc complete all as specified and as directed. |
| 15 | Supply only water proofing compound. |
| 16 | Sepply and fix 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed |
| 17 | Sepply and fix 30 mm thick 2nd class HW rail and style Plain framed, panelled shutter (any nos of panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 18 | Sepply and fix 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed. |
| 19 | Sepply and fix 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.divided into squares, with plain,chamfered or rounded,mitred and rebated sash bars,any numbers, edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 20 | Sepply and fix 30 mm thcik Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 21 | Sepply and fix solid pre lam PVC door frame/chowkhat of size 50 X 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, in opening complete all as specified and directed |
| 22 | Sepply and fix factory made solid panel pre lam PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes 19 guage thickness and size of 40mm x 20 mm for stiles, top,bottom and lock rails. M.S. frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 30mm width stuck inside with solvent cement. 110 mm width forming stiles in which 100mmm should be flat and 5 mm should be tapered, and 5 mm thich, 135 mm wide prelam pvc sheet for top and bottom rail in wchich 125 should be flat and 5 mm should be tapered on either side of panel, also for lock rail 145 mm sheet, 125 should be flat and 5 mm tapered on either side. And additional 5 mm thich pvc strip struck inside of C channel. and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete all as specified and as directed. |
| 23 | Sepply and fix 100 mm size stainless steel butt hinges, complete all as specified and as directed. |
| 24 | Sepply and fix 75 mm size stainless steel butt hinges, complete all as specified and as directed. |
| 25 | Sepply and fix 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 26 | Sepply and fix 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 27 | Sepply and fix 150 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed |
| 28 | Sepply and fix 100 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed |
| 29 | Sepply and fix 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed. |
| 30 | Material and labour for petty repairs to jainery works such as easing of doors, windows, kitchen cabinets, refixing of old existing builders hardware etc together with all accessory materilas such as nails, screws, wedges, plugs, glue, putty etc and also for plugging up old screw holes and for painting one coat on edges of shutter doors, windows etc eased or refitted to the satisfaction of user and rectifying of misc minor carpentary works as directed by the Engr-in-Charge |
| 31 | Material and labour for petty repairs to plumbing/internal water supply works such as repair to leaking bib taps, pillar taps, mixers, stop cocks by tightening and providing washer repair to float vavles, low level cistern, mixture adjustments leaking water supply lines by tighening the GI fittings or refixing W/S or sanitary fixtures using thread/ teflon taps/mcil with and including GI fitting such as GI elbows, sockets, union etc as required at site to the satisfaction of user and rectifying of misc minor plumbing works as directed by the Engr-in-Charge |
| 32 | Sepply and fix in repair 100 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed |
| 33 | Sepply and fix in repair 150 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed |
| 34 | Sepply and fix in repair 300mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed. |
| 35 | Sepply and fix in repair 100 mm size stainless steel butt hinges, complete all as specified and as directed. |
| 36 | Sepply and fix in repair 75 mm size stainless steel butt hinges, complete all as specified and as directed. |
| 37 | Sepply and fix in repair 100 mm size extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed |
| 38 | Sepply and fix in repair 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed |
| 39 | Sepply and fix in repair 100 mm long aluminium safety type hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 40 | Sepply and fix in repair 125 mm long aluminium safety type hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 41 | Sepply and fix in repair aluminium mortice lock, vertical type, 4 lever & 100 mm long complete all as specified and directed. |
| 42 | Material and labour for repair to aluminium door or window not exceeding 3.0 Sqm including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, locking arrangement, pintle hings complete all as specified and as directed. |
| 43 | Sepply and fix in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and as directed. |
| 44 | Sepply and fix Stainless Steel Peg Set (Set of 8 legs cloth hanger) for hanging cloth, complete all as specified and as directed. |
| 45 | Sepply and fix Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed. |
| 46 | Sepply and fix in repair 20 mm dia D type CP towel rail 600 mm long between flanges complete all as specified and directed. |
| 47 | Sepply and fix in repair CP towel ring complete all as specified and directed. |
| 48 | Sepply and fix in repairs 20 mm dia stainless steel tubular curtains rod with brackets ,Knobs/roller required for fitting etc complete all as specified and directed. |
| 49 | Sepply and fix in repair stainless steel brackets for curtain rod including end decorative piece complete all as specified and directed.. |
| 50 | Sepply and fix in repair floor door stopper of aluminium alloy body and tongue, overall length of cover plate 100 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed. |
| 51 | Sepply and fix stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed. |
| 52 | Sepply and fix in repairs, stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 53 | Sepply and fix in repair steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and directed. |
| 54 | Material and labour for mild steel small articles such as clamps, hold fast, wind ties, bends, anchorage plate, clamps for holding RWP, brackets, suspenders for ceiling etc conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. |
| 55 | Sepply and fix Pressed steel frames for doors of size 125mmx60mmx1.25mm with double rebates including necessary fixing lugs, hinges, lock strike plate, etc., ccomplete all as specified and as directed. |
| 56 | Sepply and fix Pressed steel frames for doors of size 105mmx60mmx1.25mm with single rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed |
| 57 | Supply and fix box type steel windows with side hung shutters both mosquito proof and glazed shutter including projecting type hinges with steel handle and steel peg stay with glazing bars and 12 mm square bar or ground bar of approved design welded to steel window frame dovetailed or welded complete all as specified and as directed. |
| 58 | Supply and fix steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and as directed. |
| 59 | Material and labour for 50 mm dia and 350 mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed before water proofing treatment of sunken slabs by cleaning RCC slab surface floors and walls by wire brush and rendering 6 mm thick in CM 1:4 mixed with integral WPC on uneven surface to make it even. Fill it water and check for dampness and seepage, all junctions points of side walls where CI/GI pipe are passing shall be sealed with epoxy mortar. Apply two coats of polymer modified cementious water proofing coating of minimum thickness of 1 mm each layer as per manufacturers instructions on floor & walls (upto 100 mm above FFL) and spray coarse sand on surface when the second layer is still sticky. Apply 20 mm thick plaster in CM 1:4 mixed with integral WPC of approved make on floors and walls including rounding of corners and junctions stoping towareds spouts. All pipes laid in sunken portions shall be covered with 50 mm thick PCC 1:3:6 all around after painting with anti corrosive black japan paint on GI/CI pipes. Test the water proofed area by filling water at least 72 hours and tested for leakage/seepage for the entire satisfaction of GE. After above said treatment apply two coats of hot blown bitumen @ 1.5 Kg /Sqm for each coat and laying 50 micron black polythene film in floors complete all as specified and directed. (Note : If leakage/Seepage occured after filling water at least 72 hours, the above said treatment will be re-done completely) |
| 60 | Material and labour non skid coloured ceramic tiles 7 to 8mm thick, (square/rectangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqm as in floors set and jointed in cement slurry and pointed in white cement mixed with colour pigment to match existing surfaces with 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 61 | Material and labour for glazed coloured ceramic tiles of size 450 x300x7 mm thick on vertical surfaces set, jointed and pointed in net cement slurry and pointed in white cement mixed with colour pigments to match the existing surface over 10mm thick screed in CM 1:4 complete all as specified and directed. |
| 62 | Material and labour for rendering 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfces finished even and smooth without using extra cement complete all as specified and as directed |
| 63 | Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using exta cement with using WPC @3% by the wt of cement. WPC shall be measured and paid seperately. |
| 64 | Material and labour for rendering 5mm thick in cement mortar 1:3 on fair faces of brick/concrete surfces as in ceiling finished even and smooth without using extra cement. |
| 65 | Material and labour for preparation of old decorated plastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including cornices and pilasters etc and applying one coat of acrylic distemper incl filling the holes and cracks with white cement so that the surace will appear smooth finish complete all as specified and directed. |
| 66 | Material and labour for preparation of old decorated wall surface and applying one coat of white wash complete all as specified and directed. |
| 67 | Material and labour for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed. |
| 68 | Sepply and fix sheet glass 3.0 mm thick ordinary quality and glazing with oil putty/wooden beads in squares not exc. 0.50sqm in each pane complete all as specified and as directed. |
| 69 | Sepply and fix 4 mm thick figured glass pin head type and glazing with oil putty/wooden beads in squares not exc 0.5 sqm in each pane complete all as specified and as directed. |
| 70 | Material and labour for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified. |
| 71 | Material and labour for preparation treating small articles such as stop, covers gully grating, holdfasts, ends of post backs of chowkats, etc. area n.exc 0.50 sqm each and applying tar or coal tar black paint to back of chowkats. |
| 72 | Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 73 | Material and labour for Preparation of new steel surface of any description,n.exc 10cm width or girth and applying two coats synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed |
| 74 | Material and labour for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 75 | Sepply and fix GI pipe medium grade 15mm bore fixed to wall wall and ceiling or laying in floors, with all new fittings as required at site complete |
| 76 | Refixing old serviceable steel tubing 15 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed. |
| 77 | Sepply and fix 20 mm bore galvanised iron tubing medium grade including all fittings in walls/ceilings or laid in floors including cutting complete all as specified and directed. |
| 78 | Refixing old serviceable steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed. |
| 79 | Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc 500 ltr but n exc 1000 ltr and writing the date of cleaning on water tank with white paint complete all as specified and directed. |
| 80 | Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity up to 500 ltr and writing the date of cleaning on water tank with white paint complete all as specified and directed. |
| 81 | Supply hoisting and fix 500 ltrs rotational moulded polythene water storage water tanks twin layered construction ( cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball valve all as specified in SSR Part I duly ISI Marked, including dismantling the existing tank complete all as specified. |
| 82 | Supply hoisting and fix 1000 ltrs rotational moulded polythene water storage water tanks twin layered construction ( cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball valve all as specified in SSR Part I duly ISI Marked, including dismantling the existing tank complete all as specified. |
| 83 | Sepply and fix in repair Chromium plated fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed. |
| 84 | Sepply and fix in repair 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 85 | Sepply and fix in repair stop valves/angle cocks, cast copper alloy concealed type long body with round operating knob chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule complete all as specified and directed. |
| 86 | Sepply and fix in repair stop valves or two way angle cocks, cast copper alloy concealed type long body with round operating knob chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule complete all as specified and directed. |
| 87 | Sepply and fix in repair two way bib cocks, cast copper alloy concealed type long body with round operating knob chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule complete all as specified and directed. |
| 88 | Sepply and fix in repair 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and complete all as specified and directed. |
| 89 | Sepply and fix in repair 15mm bore PTMT Bib taps standard any colour screwed down for iron pipe and fixed minimum weight 90 gm complete all as specified and directed. |
| 90 | Sepply and fix in repair 15mm bore PTMTpiller taps standard any colour screwed down for iron pipe and fixed minimum weight 90 gm complete all as specified and directed. |
| 91 | Sepply and fix in repair 20 mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed. |
| 92 | Sepply and fix in repairs, equilibrium float valve in low level cistern of any make complete all as specified and as directed. |
| 93 | Sepply and fix PTMT waste coupling of 32 mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed. |
| 94 | Sepply and fix PTMT waste coupling of 40 mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed. |
| 95 | Sepply and fix in repair Stainless steel grating with hole 125 mm dia fix with cement all as specified and as directed |
| 96 | Sepply and fix in repair Stainless steel grating without 100 mm dia fix with cement all as specified and as directed |
| 97 | Sepply and fix in repair 15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed. |
| 98 | Sepply and fix in repair PVC connection pipe 15mm dia and 600 mm long with two PTMT nuts at each ends with rubber washer complete all as specified and directed. |
| 99 | Sepply and fix in repairs 600 mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers fixed complete all as specified and directed. |
| 100 | Sepply and fix in repair 350 x 450 mm size cabinet mirror rectangular shape with 4 mm thick selected quality mirror and PTMT frame with openable door sutter with PTMT frame outside mirror as framed complete all as specified and directed. |
| 101 | Sepply and fix in repair EWC anti microbial seat cover hygenic type for padestral pattern complete all as specified and directed. |
| 102 | Sepply and fix in repair CP soap dish fixed to wall with brass chromium plated screws complete all as specified and directed |
| 103 | Sepply and fix in repair 125 mm dia, chromium plated swivel type shower rose with 195 mm long chromium plated shower arm and wall flange suitable for fixing 15mm bore iron pipe all as specified and directed |
| 104 | Sepply and fix in repairs 10 Litres, PVC valveless syphonic action type, flushing Cistern, low level, white inlet, ball valve, float, and brackets inclluding 32mm PVC flush pipe suitable for flushing cistern complete all as specified and directed |
| 105 | Sepply and fix in repair round moulded PVC water tank lid (Cover) for specially 500 Ltrs, 1000 Ltrs complete all as specified and directed. |
| 106 | Sepply and fix in repair glass shelf with chromium plated guard complete all as specified and directed. |
| 107 | Sepply and fix in repairs 32/40mm dia flexible waste pipe for wash basin and kitchen sink complete all as specified and directed. |
| 108 | Sepply and fix in repairs aluminium door seal complete all as specified and directed. |
| 109 | Sepply and fix stainless steel sink with drainage board made of 1mm thick stainless steel sheet for kitchen with plugs, washers, waste coupling and pipe, cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 110 | Sepply and fix stainless steel kitchen rack made of .63 mm thick stainless steel sheet of size 900 mm x 900 mm x 250 mm fixed to wall with screws complete all as specified and directed. |
| 111 | Sepply and fix in repair vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed. |
| 112 | Sepply and fix in repair vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed |
| 113 | Sepply and fix in repairs vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including barckets complete all as specified and directed. |
| 114 | Sepply and fix 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed |
| 115 | Sepply and fix 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed |
| 116 | Sepply and fix 110 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed |
| 117 | Sepply and fix 75 mm dia PVC (SWR) bends of any radius with duck foot or heel rest fitted with oval access door complete all as specified and directed |
| 118 | Sepply and fix in repair 32 mm dia CP waste coupling complete all as specified and as directed. |
| 119 | Sepply and fix in repair health faucet ABS with 1.2 m SS flexible tube and ABS wall hook fixed with necessary fixers complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender