Tender For Construction Of 4 Lane Mangaldoi Bypass (Nh-15) Starting From Ch 26+400 And Terminating At Ch. 41+500 Under Rangia Nh Division (Length = 15.100 Km) In The State Of Assam Under Epc Mode. (Job No. 15/As/2021-22/234) (Raising Of Distressed/ S
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Aug 2026
13 days left
EMD
50495
Bank guarantee accepted
Document Fee
1050
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 4 Lane Mangaldoi Bypass (Nh-15) Starting From Ch 26+400 And Terminating At Ch. 41+500 Under Rangia Nh Division (Length = 15.100 Km) In The State Of Assam Under Epc Mode. (Job No. 15/As/2021-22/234) (Raising Of Distressed/ Submerged Stretch Of Km 30 (From Ch 29.160 To 29.460 Of Nh-15 Under Sanctioned Contingency Provisions)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Flexible Pavements (Dismantling of flexible pavements and disposal of dismantled materials Including all leads, lifts and carriage, stacking serviceable and unserviceable materials separately) II. By Mechanical Means A.Bituminous course |
| 2 | Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sb-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density ( Including all leads, lifts and carriage) |
| 3 | Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80mm and of specific 28 days compressive strength over a layer of bedding sand of compacted thickness 30mm, laid either in stretcher/ running/ herringbone pattern of bonds as directed by the engineer in charge and in proper level and grade and compacted with appropriate equipment such as plate vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawing and technical specification clause 1504 of MORTH. |
| 4 | item no 4/318/305/aConstruction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table (300-2) ( including compensation of earth.)(a), ( Including cost of testing of materials at site and laboratory as directed by the deptt.) ' (a) from private land |
| 5 | Item No.5/8.13/803 : Road marking with hot applied thermoplastic compound Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads a @ 250 gm per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC-35. The finished surface to be levelled, uniform and free from streaks and holes. |
| 6 | Item No.6/8.4/801 Retro Reflotorised Traffic SignProviding and erecting retro-relectorised cautinary, mandatory and informatory sign as per IRC-67 made of high intensity encapsulated lense type reflective sheeting vide clause No.801.3, fixed over aluminium sheeting, 2mm thick fixed on an angle iron post 25x25x4mm, supported on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45x45x60 cm, 60 cm below ground level as per approved drawing and sign.(All the steeel work must be Tata/SAIL or any other approved band)Qty as per statement-X60 cm circular |
| 7 | 80cmm x 60 cm rectangular |
| 8 | Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’s fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance. |
| 9 | Tree reflector made of high intensity grade retro-reflectorised sheeting fixed over aluminium sheeting of 2mm/0.28mm thick firmly fixed with necessary galvanized nail.b)150mm dia/150mmx150mm.Quantity @ 50 nos/km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender