Tender For Repair And Maintenance Of 300 Kld Sewerage Treatment Plant At Stc Bsf Tekanpur
Tender Value
30 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
7 days left
EMD
60000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of 300 Kld Sewerage Treatment Plant At Stc Bsf Tekanpur
BOQ
| Sl. No. | Item Description |
| 1 | Supplying/ fabrication and installation of 05 mm MS sheet secondary M.B.B.R.(Moving Bed Biofilm Reactor) Tank and installation in having minimum size 13 x 13 x 13 CUF at site including drilling , welding and making holes complete work shall be supervised and certified by the manufacturers etc as required. (For 02 Nos MBBR Tank) |
| 2 | Supplying , fabrication and fixing of MS square channel various size ( 100 x 100 x 5 & 75 x 75 x 5 ) for tank supporting including drilling , welding and holes as per site requirement complete work shall be supervised and certified by the manufacturers etc as required. (For 02 Nos MBBR Tank) |
| 3 | Providing and laying/mixing of MBBR Media in the existing aeration tank with the following specification , Black colour Minimum height of Media 15 mm and diameter 22 mm , structure cylindrical with external fins psa 0.37 , specific gravity- 0.90 -0.95 gms/cm3, Max continuous operating temperature 80 C , voidage > 98 % , density (gm/cc) - 0.93 , media fill rate range % fill of v 25-25 as per direction of Engg-In charge. |
| 4 | Providing and fixing of 5 mm thick Fibre Glass Reinforced Plastic (FRP) in the existing MS Tank of approved colour, brand and manufacture, made with water and fire- retardant grade unsaturated polyester resin, cast monolithically with 5 mm thick FRP laminate for MS tank and fixing with the help of Epoxy resin used for bonding of FRP sheets conforming to IS:14856- 2000 etc complete as required as per direction of Engg-In charge. |
| 5 | Providing and fixing of twin Lobe roots air blower with three phase ,5 HP , 1440 RPM electric motor suitable for 300 KLD swerage treatment plant. Twin lobe air blower with the following specification- Minimum discharge capacity- 150 m^3/hr. , Differential pressure - 0.4 kg/cm^2 , shaft power- 3.40 BHP , V- Belt drive , Air cooled, Discharge line -65 NB , Horizontal orientation flow ,oil & grease lubrication,casing & rotor material- Cast iron , shaft- forged steel material , common base frame with MS fabricated channel for blower & electric motor with rails , suction silencer with flange & interconnecting with pipe line, suction air filter with Non-Return valve , belt guard, pressure gauge with breather plugs , pressure relief valve with studs washer & nut and with all necessary accessories as per direction of Engg-incharge. |
| 6 | Providing and fixing 2 inch dia G.I. pipe (medium class) in existing tank /surface complete with G.I. fittings including cutting . welding ,threading and suitable size of reduser as per site requirement. |
| 7 | Providing and fixing 3 inch dia G.I. pipe (medium class) in existing tank /surface complete with G.I. fittings including cutting . welding ,threading and suitable size of reduser as per site requirement. |
| 8 | Providing and fixing 4 inch dia G.I. pipe (medium class) in existing tank /surface complete with G.I. fittings including cutting . welding ,threading and suitable size of reduser as per site requirement. |
| 9 | Providing and fixing 6 inch dia PVC pipe (heavy gauge) in existing tank /surface complete with fittings as per site requirement. |
| 10 | Providing and fixing of 80/100 mm nominal bore gun metal gate valve with C.I. wheel of approved quality ( screwed end ) complete with fittings as per site requirement. |
| 11 | Providing and fixing of 5 HP , Monoblock pump motor , Three phase , 440 volt suitable for water supply of STP plant complete with fittings as per site requirement. |
| 12 | Providing and fixing of 1 HP , sludge / sewage pump motor set , Three phase , 440 volt suitable for STP plant complete with fittings as per site requirement. |
| 13 | Providing and laying Urea in existing MBBR Tank as per direction of Engg-Incharge. |
| 14 | Providing and laying DAP in existing MBBR Tank as per direction of Engg-Incharge. |
| 15 | Providing and laying Jaggery in existing MBBR Tank as per direction of Engg-Incharge. |
| 16 | Providing and laying Dung in existing MBBR Tank as per direction of Engg-Incharge. |
| 17 | Deduct for taking dismantled material ( MS Sheet/ MS channel/Angle iron/MS/GI Pipes ) variuos size received during execution of work. |
| 18 | Deduct for taking dismantled material ( blower with all accessories ) variuos size received during execution of work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender