Tender For Replacement Of Damaged Parts Of Hvac System At Power House, Teesta-V Power Station.
Tender Value
1.35 Crore
Estimated cost
Bid Submission
05 Aug 2026
11 days left
EMD
2.71 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sikkim → Sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Damaged Parts Of Hvac System At Power House, Teesta-V Power Station.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and shifting of damaged existing: 7238 CFM (30 mm SP) Exhaust Fan of Battery Room (Make: Alstom, Model: BFD30J/3K7-P4) of HVAC System in Power House |
| 2 | Dismantling and shifting of damaged existing: 7500 CFM (30 mm SP) Smoke Exhaust Fan installed in Access Tunnel (Make: Alstom, Model: BFD30J/3K7-P4) of HVAC System in Power House |
| 3 | Dismantling and shifting of damaged existing: 20950 CFM (20 mm SP) Fresh Air Fan installed in Ventilation Tunnel (Make: Alstom, Model: 38J1/2/5K5-P4-8) of HVAC System in Power House |
| 4 | Supply of 7238 CFM (30 mm SP) Exhaust Fan of Battery Room (Make: Alstom, Model: BFD30J/3K7-P4) of HVAC System (as per Annexure-I of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document) |
| 5 | Supply of 7500 CFM (30 mm SP) Smoke Exhaust Fan installed in Access Tunnel (Make: Alstom, Model: BFD30J/3K7-P4) of HVAC System (as per Annexure-I of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document) |
| 6 | Supply of 20950 CFM (20 mm SP) Fresh Air Fan installed in Ventilation Tunnel (Make: Alstom, Model: 38J1/2/5K5-P4-8) of HVAC System (as per Annexure-I of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document) |
| 7 | Installation, Testing & Commissioning of 7238 CFM (30 mm SP) Exhaust Fan of Battery Room (Make: Alstom, Model: BFD30J/3K7-P4) of HVAC System (as per Annexure-I of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document) |
| 8 | Installation, Testing & Commissioning of 7500 CFM (30 mm SP) Smoke Exhaust Fan installed in Access Tunnel (Make: Alstom, Model: BFD30J/3K7-P4) of HVAC System (as per Annexure-I of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document) |
| 9 | Installation, Testing & Commissioning of 20950 CFM (20 mm SP) Fresh Air Fan installed in Ventilation Tunnel (Make: Alstom, Model: 38J1/2/5K5-P4-8) of HVAC System (as per Annexure-I of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document) |
| 10 | Dismantling and shifting of existing rectangular & round ducting for Smoke Exhaust (Access Tunnel), Return Air (Transformer Hall), Return Air (Control Block), Fresh Air (Ventilation Tunnel), including fittings, supports, flanges, etc. |
| 11 | Supply of rectangular & round ducting for Smoke Exhaust, Return Air (Transformer Hall), Return Air (Control Block), Fresh Air (Ventilation Tunnel) etc. (as per Annexure-II of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document) |
| 12 | Installation, testing & commissioning of rectangular & round ducting for Smoke Exhaust, Return Air (Transformer Hall), Return Air (Control Block), Fresh Air (Ventilation Tunnel) etc. (as per Annexure-II of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document) |
| 13 | Removal, cleaning and shifting of damaged portion of existing duct thermal insulation consisting of 40 mm thick aluminium foil-faced, resin-bonded fibreglass insulation of density 24 kg/m³, including surface preparation, completeas per site conditions and requirements. |
| 14 | Supply of 40 mm thick aluminium foil-faced, resin-bonded fibreglass thermal insulation of density 24 kg/m³ over duct surfaces, including all accessories (as per Annexure-III of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document or equivalent/better) |
| 15 | Installation, testing & commissioning of 40 mm thick aluminium foil-faced, resin-bonded fibreglass thermal insulation of density 24 kg/m³ over duct surfaces, including all accessories (as per Annexure-III of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document or equivalent/better) |
| 16 | Supply of Motorized (ON-OFF type) GI Duct Volume Control Damper with actuator & panel (10 Nm), Size: 1165 × 1165 × 140 mm (as per Annexure-IV of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document) |
| 17 | Supply of Motorized (ON-OFF type) GI Duct Volume Control Damper with actuator & panel (10 Nm), Size: 870 × 860 × 140 mm (as per Annexure-IV of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document) |
| 18 | Installation of Motorized (ON-OFF type) GI Duct Volume Control Dampers with Actuator & Control Panel (10 Nm), Size: 1165 × 1165 × 140 mm (as per Annexure-IV of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document) |
| 19 | Installation of Motorized (ON-OFF type) GI Duct Volume Control Dampers with Actuator & Control Panel (10 Nm), Size: 870 × 860 × 140 mm (as per Annexure-IV of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document) |
| 20 | Supply of Blower with Pulley (Motor & Blower Side) for Package Air Conditioner (Model: DPW1983S, Make: Blue Star Ltd.) as per Annexure-V of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document |
| 21 | Installation of Blower with Pulley (Motor & Blower Side) for Package Air Conditioner (Model: DPW1983S, Make: Blue Star Ltd.) as per Annexure-V of SECTION-VIII-TECHNICAL SPECIFICATION of Tender Document Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender