Tender For Repairs To Chain Link Fencing, Gate Wall, Barbed Wire Fencing, Concertina Coils, Misc Item In Tech Area And Certain B/R Works At Wsa Area At Afs Under Ge (Af) Jorhat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Aug 2026
15 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jorhat → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Chain Link Fencing, Gate Wall, Barbed Wire Fencing, Concertina Coils, Misc Item In Tech Area And Certain B/R Works At Wsa Area At Afs Under Ge (Af) Jorhat
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete, brick work,masonry, etc. including taking out embedded portion and making good of disturbed ground complete all as specified and as directed. |
| 2 | S&F MS angle section straight portion, embeding in concrete and screwing, etc. securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets for securing wire mesh, etc. including all necessary drilling, bolting or riveting, round bars, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 3 | S&F mild steel round bars 10mm dia and over cut to length, bent to shape required for bracing in chain link fencing complete as specified quality confirming to Fe -410-W complete all specified and as directed. |
| 4 | Dismantling fencing wire mesh, any type complete all as specified and as directed. |
| 5 | M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, etc. complete all as specified and as directed. |
| 6 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed. |
| 7 | Supply only chain link MS galvanisd fencing including strengthening complete all as specified and as directed. Note : The work shall be carried out as per IS 4996 |
| 8 | M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 9 | M&L for preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (first grade quality) complete all as specified and as directed. |
| 10 | S&F as in repairs CONSEC-ZAL Super Razor Punched Barb Tape (SRPBT) aluminium base helix coil with and including necessary fixing clips for securing complete all as specified and as directed with the following specifications:-(i) Diameter of concentring coil (unscratched) : 1000mm (ii) Numbers of turns of concentring : 51 turns per coil (iii) weight of each coil with hessian pack -14.50 kg(+ 0.7)(iv) coverage per coil - 8 RM (v) Central core wire:-Made from 2.50mm dia high tensile spring steel (HTSS) wire confirming to IS-4454 duly hot dipped galvanized(confirming to IS 2629)(vi) Razor punched strip:- Razor punched tape is CONSEC-ZAL steel comprising of aluminium base with zinc alloy @ 150 gm/sqm confirming to ASTM A-792/A-792 M.Note : Running length of the wall shall be measured for payment purpose. |
| 11 | Fixing only for restraining, resecuring making good as in repairs CONSEC-ZAL super razor punched barb tape (SRPBT) aluminium base helix coil with and including necessary fixing clips for securing complete all as specified and as directedNote : Running length of the wall shall be measured for payment purpose. |
| 12 | S&F as in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. Note : Each line of wire to be measured separately. |
| 13 | Fixing only as in repairs for restraining, resecuring making good of galvanised, 2 strand, steel barbed wire of any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed Note: Each line of wire to be measured separately. |
| 14 | Dismantling structural steel work including doors, gates but excluding framed truss, etc.complete all as specified and as directed. |
| 15 | S&F MS work such as steel gate for framed hunged as in steel gates including pintle hinges, stoves, hand made sliding bolts, etc. made out of rolled section like angle iron, flat iron, MS round bars or tubular steel conforming to Fe.450 including refixing of nut and bolt, spacer, etc. complete all as specified and as directed. |
| 16 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and precast concrete articles complete all as specified and as directed. |
| 17 | M&L brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed. |
| 18 | M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in ccemememennt mortar (1:6) complete all as specified and as directed. |
| 19 | Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and as directed. |
| 20 | M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 21 | M&L for 10mm thick rendering in cement mortar (1:6) on fair faces of brick work, drain or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 22 | M&L for preperation of new plastered surfaces of wall and applying two coats of cement base paint paint over and including one coat of alkali resistant primer paint complete all as specified and as directed. |
| 23 | M&L for preparation of newly plastered surfaces of walls and applying two coats of antifungal acrylic emulsion paint in camouflage pattern over and including one coat of primer complete all as specified and as directed. |
| 24 | M&L for preperation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including one coat of alkali resistant cement primer complete all as specified and as directed. |
| 25 | Demolition of unreinfroced cement concrete in ground floors and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 26 | M&L for providing 75mm cement concrete (1:3:6) type C-2 (using 40mm graded aggregate) in cement concrete in sub-floors, sub-bases, floors and paving, etc. complete all as specified and as directed. |
| 27 | Dismantling floor, hearth or wall tiling including cement mortor bedding complete all as specified and as directed. |
| 28 | M&L for chequered cement concrete tiles of size 30cmx30cm with 25mm thick, mix with grey cement and pigments, set, jointed and pointed in neat cement slurry and pointed with mixture of grey cement and pigments as in floors over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 29 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 30 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 31 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and as directed. |
| 32 | M&L for RCC (1:2:4) (nominal mix) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,culvert slab, manhole cover and in shelves and the like complete all as specified and as directed. |
| 33 | S&F mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all specified and as directed. |
| 34 | All as per Serial item No. 36 here-in-before but of size 6 -8mm dia. |
| 35 | M&L for providing precast cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in louvres and jallies, 35mm thick (measured solid), set in cement mortar (1:6) including all mouldings including taking down old jallies complete all specified and as directed. |
| 36 | M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, surface channels, drains, etc. complete all as specified and as directed. |
| 37 | M&L brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:4) complete all as specified and as directed. |
| 38 | M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in sub base floor, foundations, filling and mass concrete, etc. including necessary formwork complete all as specified and as directed. |
| 39 | M&L for 15mm thick rendering in cement mortar (1:6) other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 40 | M&L for 5mm thick rendering in cement mortar (1:3) on fair faces of concrete surfaces as in ceiling complete all as specified and as directed. |
| 41 | M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 42 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 43 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including 'Nainital' or similar pattern roof covering complete all as specified and as directed. |
| 44 | S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, etc. fixed with self tapping screws complete all as specified and as directed. |
| 45 | S&F pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, etc., fixed with self tapping screws complete all as specified and as directed. |
| 46 | Dismantling wrought iron or mild steel work of any description complete all as specified and as directed. |
| 47 | S&F roof trusses (framed), posts ,trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections,tubular section) including distance pieces, cleats etc. Fe-410-W (Gde- E-250) quality-B complete all as specified and as directed. |
| 48 | Dismantling of damaged RCC works (cover slab of manholes, septic tank, kitchen slab or similar articles) of any description and any position not otherwise specifically provided for complete all as specified and as directed. |
| 49 | M&L for precast RCC cover slab (1:2:4) type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face complete all as specified and as directed. |
| 50 | M&L for 75mm thick PCC (1:2:4) type B-2 (using 40mm graded stone aggregate) as in floors, paving, path, etc. finished the surface of concrete pavement by broming including necessary formwork complete all as specified and as directed. |
| 51 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) of area not exc. 1.5 Sqm complete all as specified and as directed. |
| 52 | Taking down shutter of any description of area n. exc. 1 Sqm each complete all as specified and as directed. |
| 53 | M&L for 2nd class hard wood, plain, solid, straight, chowkhat and framed, wrought, rebated on the solid, rounded or chamfered, put together with pinned at joints complete all as specified and as directed |
| 54 | M&L for 2nd class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepare to received glass, gauge, etc. divided into squares with plain chamfered or rounded mitred and sash bars any number edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8 Clause 8.24 (a) and fited to wooden chowkhat complete all as specified and as directed. |
| 55 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 56 | S&F 4.0mm thick sheet glass, ordinary quality and glazing with oil putty or wooden bead in square of area n. exc. 0.5 Sqm in each pane complete all as specified and as directed. |
| 57 | S&F 4.8mm thick sheet glass, ordinary quality and glazing with oil putty or wooden bead in square of area n. exc. 0.5 Sqm in each pane complete all as specified and as directed. |
| 58 | S&F chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, 'L' or 'T' section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 59 | S&F for aluminium anodised powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed |
| 60 | M&L for aluminium powder coated window and ventilator glazed/gauged shutter sliding type without sash bars aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips rubber packing complete all as specified and as directed. |
| 61 | S&F as in repairs aluminium DECO grill of standard section, type 'A' diagonal, with 'U' rail necessary jointing cleats, screws fixed with frame, etc. complete all as specified and as directed. |
| 62 | M&L for preparation of new wood and wood based surfaces of any description, not otherwise described for over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and as directed. |
| 63 | S&F 75mm long butt hinges \\"medium weight\\" cold rolled mild steel complete all as specified and as directed. |
| 64 | All as per Serial item No. 63 here-in-before but 100mm long. |
| 65 | S&F 100mm size extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed. |
| 66 | M&L for forming construction joint 30mm (deep)x10mm (wide) filled with sealing compound complete all as specified and as directed. |
| 67 | Dismantling of wall and ceiling boards any type (fibre, pulp, insulation, etc.) including cover fillets and removal of debris complete all as specified and as directed. |
| 68 | Dismantling timber scantlings 40 sq.cm and over in section, in any position complete all as specified and as directed. |
| 69 | Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq.cm in section in any position complete all as specified and as directed. |
| 70 | M&L second class hard-wood in scantlings, fixed in timber (clean sawn) complete all as specified and as directed. |
| 71 | S&F 4mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work in ceiling complete all as specified and as directed |
| 72 | M&L for 2nd class hard wood plain fillets, square or rectangular or triangular in section, wrought, sectional area exc. 6.0 sq.cm but not exc. 13.0 sq.cm (as in studs) including taking down old one complete all as specified and as directed. |
| 73 | M&L for 2nd class hard wood plain fillets, square or rectangular or triangular in section, wrought, sectional area not exc. 3.0 sq.cm (as in studs) including taking down old one complete all as specified and as directed. |
| 74 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed. |
| 75 | M&L for 5mm thick colour PVC prelaminated sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining and solid PVC partitions inclusive of solvent cement and fixing at site complete all as specified and as directed.NOTE : The contract sum shall be derieved by deducting the amount shown in Schedule of Credit attached to this tender from total amount of Schedule 'A'/BOQ. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender