Tender For - Provision Of Main Gate At Mes Complex At Af Stn Bhowali.
Tender Value
9.72 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
18 days left
EMD
19400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nainital → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for - Provision Of Main Gate At Mes Complex At Af Stn Bhowali.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed. |
| 2 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cespits, manholes pier hold etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil, complete all as specified and directed. |
| 3 | M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor, etc complete all as specified and directed |
| 4 | M & L high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified and directed. |
| 5 | M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders complete all as specified and directed. |
| 6 | M & L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finished fair complete all as specified and directed |
| 7 | M&L RCC M-20 (Nominal Mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 8 | Returing, filling in trenches, incl spreading, levelling, watering and well ramming in layers not exc 25 Cm in hard/dense soil complete all as specified and directed. |
| 9 | Removing excavated material (soil) to a distance not. exc. 50 mtr and depositing where directed at a level nexc 1.5 mtr above the starting point. |
| 10 | M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions finished fair complete all as specified and directed |
| 11 | M&L RCC M-20 (Nominal Mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 12 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6., etc complete all as specified and directed. |
| 13 | M & L for use and waste of formwork to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, etc for fair finish surfacecs complete all as specified and directed |
| 14 | M&L RCC M-20 (Nominal Mix) using 20 mm graded stone aggr as in beams, bands, cantilvers, bressummers, linters, chajjas, etc over 1.5m span etc complete all as specified and directed |
| 15 | M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 16 | M & L 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) for levelling course in floors complete all as specified and directed. |
| 17 | M & L for 75mm thick cement concrete 1:3:6 type C1, with using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed. |
| 18 | M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and fair without using extra cement complete all as specified and directed.(Note:- Liquid water proofing compound to be measured paid separately) |
| 19 | M&L for 18-20 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete all as specified and directed. |
| 20 | Rounding to edges of stone slab slab one edge such as in steps,cooking platform,and other similar situation complete all as specified and directed. |
| 21 | Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved. |
| 22 | S & F 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 23 | S & F 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 24 | S & F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 25 | S&F mild steel framed work such as framed and hung as gates ornamental and intricate design, including pintle hinges, stops,hand-made sliding bolts, etc grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165 complete all as specified and directed. |
| 26 | M & L for two coat of synthetic enamel paint on steel surface of any description not exc 10 cm in width or girth when unconnected with other painting or painted in different tint |
| 27 | M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregate as in bed blocks, coping, for fixing holdfast/lugs,filling hollow space of pressed steel door frame etc including necessary form work all complete as specified and as directed. |
| 28 | S&F Aluminium Composite Panel (ACP) of any colour of exterior edge for cladding near entrance of Alucobond/Alstrong/Brand approved equivalent make for external wall / column / canopy cladding in combination of solid / Metallic colours, including all necessary frame work and complete weather sealing. The composite panel should consist of 3mm thermoplastic core of LDPE sandwiched between 2 skins of 0.5mm thick aluminium sheet (alloy designation 310S) making a total panel thickness of 4mm. The surface shall be furnished with Lumiflon based flourcarbon coating on top sides and service coating on reverse side. Coatings shall conform to specifications of ECCA /AAMA and conforming to the mechanical properties of panel as per detailed technical specifications. The system shall be fixed using GI brackets and stainless steel bolts and nuts complete with spring washers and cap nuts and all other necessary accessories. The bracket support shall be designed as per manufactures specification and shall withstand a wind pressure of 150 Kg/Sqm. All hardware shall corrosion resistant frame out of anodised aluminium member. |
| 29 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 30 | S&F PVC Ceiling Lining (False Ceiling) incl frame work for PVC Ceiling consisting of 5mm thick Plain colour PVC sheet 8 to 10 mm hollow section inclusive of solvent cement and fixing at site on frame work as per requirement on site complete all as specified (Note:- Framework incusive in above item and not to be paid separately.) |
| 31 | S & F Pre-painted galvalume aluminium zinc GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa with AZ150 (150 g/Sqm total both sides) coating as in roof covering/cladding to wall, fixed with self tapping screws and EPDM washers as specified and directed by Engineer- in Charge. Note: The Preprinted galvalume aluminium zinc GI based profile pattern steel sheet should be JSW AZ150 Colouron Plus Sheet or Equivalent as approved by Engr in Charge. (Note :-Rate includes for make to shape in any curvature, radius or angle as directed by Engg in charge.) |
| 32 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 33 | M&L in for MS steel Hollow Section work in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified and as directed. |
| 34 | M&L in for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete all as specified and as directed. |
| 35 | Demolition of brick work built in cement mortar including all quions ,arcches , pillars etc complete all as specified and as directed. |
| 36 | Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified and as directed . |
| 37 | Demolotion of Concrete of any description and in any position not otherwise specifically provided for Complete all as specified and directed. |
| 38 | Dismantling wrought iron or mild steel work of any description not otherwise provided for angle Post etc complete all as specified and directed. |
| 39 | M&L Chequred cement concrete tiles 30cmx30cmx 25mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pigment, complete all as specified. |
| 40 | M&L for 80mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand complete all as specified and as directed. |
| 41 | M& L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 42 | M & L for providing 75 mm thick cement concrete type-C-2 1:3:6 (using 40 mm grade stone aggregate) as in plinth protection or similar wk complete all as specified and directed. |
| 43 | M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes etc in Cement Mortar 1:6 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 16, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender