Tender For Repairs To Roof Sheet, Joinery, Sanitary Fittings, Floor Tiles And Other Misc Items In Mp, Op And Billets In Technical Area At Afs Under Ge (Af) Jorhat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Aug 2026
13 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jorhat → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Roof Sheet, Joinery, Sanitary Fittings, Floor Tiles And Other Misc Items In Mp, Op And Billets In Technical Area At Afs Under Ge (Af) Jorhat
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) of area not exc. 1.5 Sqm complete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) of area exc. 1.5 Sqm but n. exc 4 Sqm complete all as specified and as directed. |
| 3 | Taking down shutter of any description of area n. exc. 1 Sqm each complete all as specified and as directed. |
| 4 | All as per Serial item No. 3 here-in-before but area exc. 1 Sqm but not exc. 2 Sqm each. |
| 5 | M&L for 2nd class hard wood, plain, solid, straight, chowkhat and framed, wrought, rebated on the solid, rounded or chamfered, put together with pinned at joints complete all as specified and as directed |
| 6 | M&L for 2nd class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepare to received glass, gauge, etc. divided into squares with plain chamfered or rounded mitred and sash bars any number edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8 Clause 8.24 (a) and fited to wooden chowkhat complete all as specified and as directed. |
| 7 | M&L for 2nd class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepare to received glass, gauge, etc. divided into squares with plain chamfered or rounded mitred and sash bars any number edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8 Clause 8.24(a) and fited to wooden chowkhat complete all as specified and as directed. |
| 8 | S&F 2nd class hard wood 30mm thick, factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with decorative face veener with lipping frame to match complete all as specified and as directed. |
| 9 | S&F 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 10 | S&F 2nd class hard wood 25mm thick, factory made flush shutters, solid core construction, with block board core and both faces is covered with decorative face veener with lipping frame to match complete all as specified and as directed. |
| 11 | M&L factory made solid PVC door frame of size 50mmx47mm, made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, and fixing in opening as per specification & drawing shown in SSR Part-II as approved complete all as specified and as directed. |
| 12 | S&F factory made solid panel PVC door shutter, 30mm thick (style) connecting of frame, made out of MS tube for top and bottom rail. MS frame shall be coverd with heat moulded plain coour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for top rail and bottom rail panelling of plain colour PVC to be fitted in the ms frame welded/sealed in the stiles and rail with suitable PVC sheet and beading and jointed together with solvent cement complete all as specified and as directed. |
| 13 | M&L for preparation of new wood based surfaces of any description, not otherwise described for over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and as directed. |
| 14 | Hacking out old broken glass (any thickness, size , qulaity or description) as in metal frame including punching or drilling out old glazing pins/spring clips, complete all as specified and as directed. |
| 15 | S&F 4.0mm thick sheet glass, ordinary quality and glazing with oil putty or wooden bead in square of area n. exc. 0.5 Sqm in each pane complete all as specified and as directed. |
| 16 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 17 | S&F as in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed . |
| 18 | S&F mild steel hold fast, made of flat iron conforming to Fe-410-0 or Fe-310-0 compelete all as specified and as directed. |
| 19 | S&F chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, 'L' or 'T' section supports for shelves, etc. and similar articles conforming to Fe-290 Gde E-165 compelete all as specified and as directed. |
| 20 | Cutting holes in brick walls in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as required depth of embedded portion of hold fasts, exc. half brick and not exc. one brick thick complete all as specified and as directed |
| 21 | S&F 75mm long mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed. |
| 22 | All as per Serial item No. 21 here-in-before but of size 100mm long. |
| 23 | S&F 100mm long aluminium anodised tower bolt of extruded section complete all as specified and as directed. |
| 24 | All as per Serial item No. 23 here-in-before but of size 150mm long. |
| 25 | S&F aluminium handle of size 150mm, extruded aluminium alloy, fabricated type, anodised complete all as specified and as directed. |
| 26 | All as per Serial item No. 25 here-in-before but of size 100mm. |
| 27 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. |
| 28 | S&F 100mm long butt hinges with stainless steel hinges complete all as specified and as directed. |
| 29 | S&F as in repairs ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and as directed. |
| 30 | S&F as in repairs 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. |
| 31 | S&F as in repairs 75mm long mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed. |
| 32 | All as per Serial item No. 31 here-in-before but of size 100mm long. |
| 33 | S&F as in repairs 150mm long aluminium anodised tower bolt of extruded section complete all as specified and as directed. |
| 34 | S&F as in repairs aluminium handle of size 150mm, extruded aluminium alloy, fabricated type, anodised complete all as specified and as directed. |
| 35 | S&F as in repairs aluminium extruded section body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed. |
| 36 | S&F for door seal of any description complete all as specified and as directed. |
| 37 | S&F as in repairs 140mm length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 38 | Demolition of brick work built in cement mortar complete all as specified and as directed. |
| 39 | M&L for brickwork with sub class ‘B’ bricks (with old size first quality), straight or curved on plan exc. 6m mean radius, built in cement motar (1:6) complete all as specified and as directed. |
| 40 | M&L for brickwork with sub class ‘B’ bricks (with old size first quality), straight or curved on plan to any radius in half brick thick wall, built in cement motar (1:6) complete all as specified and as directed. |
| 41 | M&L for plain cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 42 | Taking down cement or cement lime plaster on brick or stone walls, ceilings, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 43 | M&L for 15mm thick rendering in cement mortar (1:6) as on fair faces of brick work or concrete surfaces, finishing the surfaces fair and even without using extra cement complete all as specified and as directed. |
| 44 | M&L for 15mm thick rendering in cement mortar (1:4) mixed with WPC as per manufacture's instructions on fair faces of brick work or concrete surfaces, finishing even and fair without using extra cement complete all as specified and as directed.Note : WPC shall be paid and measured seperately. |
| 45 | M&L for rendering 5mm thick in cement mortar (1:3) on fair faces of concrete surfaces as on ceiling complete all as specified and as directed. |
| 46 | M&L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed . |
| 47 | M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed . |
| 48 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including one coat of alkali resistant primer complete all as specified and as directed. |
| 49 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistant primer complete all as specified and as directed. |
| 50 | M&L for preparation plastered or unplastered surfaces after complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over new surfaces complete all as specified and as directed. |
| 51 | S&F as in repairs bib taps of size 15mm bore, chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 52 | S&F as in repairs bib tap of size 15mm bore, standard of PTMT, any colour, high pressure screwed for iron pipe (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and as directed. |
| 53 | S&F as in repairs 15mm bore angle/stop cock PTMT any colour, high pressure screwed for iron pipe and fixed, complete all as specified and as directed. |
| 54 | S&F as in repairs 15mm bore stop valves, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed. |
| 55 | S&F as in repairs 15mm bore stop valves, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 56 | Cutting chases, pinning in to brick wall making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed complete all as specified and as directed. |
| 57 | S&F as in repairs for 20mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all specified and as directed. |
| 58 | All as per Serial item No. 57 here-in-before but of size 15mm. |
| 59 | S&F as in repairs for tubular towel rail brass chromium plated 20mm dia, 'D' type, 60cm long between flanges complete all as specified and as directed. |
| 60 | S&F as in repairs for vitreous china wash basin white, flat back of size 580x450mm excluding taps. waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed. |
| 61 | S&F as in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm and bowl size 410mmx330mmx160mm complete all as specified and as directed. |
| 62 | S&F as in repairs pillar taps of size 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 63 | S&F as in repairs pillar taps of size 15mm bore, PTMT anycolour, high pressure, screwed for iron pipe and fixed (minimum weight 15mm-110gms) complete all as specified and as directed. |
| 64 | S&F as in repairs looking mirror of size 600mmx450mm, 5.5mm thick sheet glass with PVC beading all around etc. complete all as specified and as directed. |
| 65 | S&F in repairs kitchen plate rack, made of stainless steel 1mm thick, overall size 915mmx915mmx255mm complete all as specified and as directed. |
| 66 | S&F as in repairs brass chromium plated shower rose of size 125mm with swivel joints including fixing to 15mm dia steel pipe or union complete all as specified and as directed. |
| 67 | S&F as in repairs health faucet (ABS body) mild steel chromium plated, suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 68 | S&F as in repairs 10 litres capacity PVC low level syphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets, flushing pipe and making connection to pipes complete all as specified and as directed. |
| 69 | S&F for vitreous china squatting pan 'Orissa' pattern, of size 580x440mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including trap set and concrete including connection to trap and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floors with PCC bedding (1:5:10) type E-2 (using 40mm nominal brick ballast) and connection to trap with cement mortar all as specified and making good to floor complete all as specified and as directed. |
| 70 | S&F as in repairs pedestal pan and trap including connection to drain (or outgoing pipe) and to flushing vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed. |
| 71 | S&F as in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 72 | S&F as in repairs 15mm dia PVC connection pipe with PTMT nuts of length 600mm complete all as specified and as directed. |
| 73 | S&F as in repairs 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60gms) for WHB complete all as specified and as directed. |
| 74 | S&F as in repairs 40mm dia waste coupling of stainless steel for sink complete all as specified and as directed. |
| 75 | Taking up or down 20mm bore steel tubing and connections, for re-fixing or removal from site complete all as per specified and as directed. |
| 76 | S&F for 20mm bore galvanised iron water tubes, 'medium grade' with all fittings and fixed to walls or ceilings or laid in floors complete all as specified and as directed. |
| 77 | Re-fixing only 20mm bore old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) including cleaning and re-running the old screw threads as required complete all as specified and as directed. |
| 78 | Taking up or down 15mm bore steel tubing and connections, for refixing or removal from site complete all as per specified and as directed. |
| 79 | S&F for 15mm bore galvanised iron water tubes, 'medium grade' with all fittings and fixed to walls or ceilings or laid in floors complete all as specified and as directed. |
| 80 | Re-fixing only 15mm bore old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) including cleaning and re-running the old screw threads as required complete all as specified and as directed. |
| 81 | S&F covers for rotational moulded polyethylene storage water tank of capacity 500 litre, 1000 litre and 2000 litre complete all as specified and as directed. |
| 82 | S&F 500 litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I including dismantling of old existing tank complete all as specified and as directed. |
| 83 | All as per Serial item No. 82 here-in-before but of 1000 litre capacity. |
| 84 | S&F as in repairs 20mm bore, PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (minimum weight 20mm - 210gms) complete all as per specified and as directed. |
| 85 | S&F as in repairs 50mm dia high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/Cm2 fixed to walls, ceilings or in floors, etc. complete all as per specified and as directed. |
| 86 | S&F as in repairs 100mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as per specified and as directed. |
| 87 | S&F100mm CP gratings complete all as specified and as directed. |
| 88 | S&F as in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as per specified and as directed. |
| 89 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or re-fixing or removal to store measured (overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 90 | S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors or walls, etc. complete all as specified and as direcetd. |
| 91 | S&F 110mm bore PVC (SWR) bends, any radius provided with access door complete all as specified and as directed. |
| 92 | S&F as in repairs 110mm bore PVC (SWR) Tee complete all as specified and as directed. |
| 93 | Demolition of reinforced cement concrete for roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as per specified and as directed. |
| 94 | M&L for reinforced cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 95 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) complete all as specified and as directed. |
| 96 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 97 | Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 98 | M&L for plain cement concrete (1:2:4) type B-0 (using 12.50mm graded stone aggregate) for providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges as for padding including mixing with WPC @ 3% by weight of cement or as per manufacturer's instructions and finishing surface even and smooth without using extra cement complete all as specified and as directed.Note : WPC shall be paid and measured seperately. |
| 99 | M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:3) mixed with WPC as per manufacturer's instructions, finished fair and even without using extra cement complete all as specified and as directed.Note : WPC shall be paid and measured seperately. |
| 100 | Supply only integral water proofing compound (WPC) confirming to IS: 2645-1975 of approved make complete all as specified and as directed. |
| 101 | M&L for water proofing treatment with APP based standard membrane over PCC padding as on roof with the following courses of treatment complete all as specified and as directed as follows:-(a) Apply bituminous primer @ 1.20 Kg/sqm of the surface area including cleaning the surfaces.(b) Apply 3mm thick APP plastomeric bitumen based mineral finished water proofing membrane polyster reinforced (4kg/sqm) with minimum 10cm side over laps & 15cm end overlap and laid with LPG torch over lap sealed and finished neat including surface preparation before and after application of treatment as per manufactures instruction. (c) The finished surface be given bituminous based aluminium paint as per manufacturer's instructions. |
| 102 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as per specified and as directed. |
| 103 | M&L for 40mm thick plain cement concrete (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in floor, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 104 | S&F 38mm width glass dividing strips, 3mm thick and inserted in position, conform to design complete all as specified and as directed. |
| 105 | M&L for 50mm thick plain cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 106 | M&L for 75mm thick plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in floor, paving, path, etc. finished the surface of the concrete pavement by brooming including necessary formwork complete all as specified and as directed. |
| 107 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 108 | M&L for glazed ceramic coloured tiles as on vertical surfaces such as skirting/dado, etc, of size 350x250x7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick rendering in cement mortar (1:4) as backing layer complete all as specified and as directed. |
| 109 | M&L for non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm fixed on floor, etc., set and jointed in neat cement slurry and pointed in white or colured cement to match, over and including 15mm thick screed bedding layer in cement mortar (1:6) complete all as specified and as directed. |
| 110 | M&L for vitrified ceramic coloured tiles of size 10mm thick (square/rectangular), area of each tile not exceeding 0.36 sqm fixed on floor, etc., set and jointed in neat cement slurry and pointed in white or colured cement to match, over and including 15mm thick screed bedding layer in cement mortar (1:6) complete all as specified and as directed. |
| 111 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including 'Nainital' or similar pattern roof covering complete all as specified and as directed. |
| 112 | S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, etc. fixed with self tapping screw complete all as specified and as directed. |
| 113 | S&F pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, etc., fixed with self tapping screw complete all as specified and as directed. |
| 114 | S&F 0.63mm galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls, etc. with grade of zinc coating 275 complete all as specified and as directed. |
| 115 | S&F 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed. |
| 116 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 117 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W, Gde E-250 complete all as specified and as directed. |
| 118 | S&F joist, channel, angle or tee sections, fixed independently without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of length indicated) conforming to Fe-410-W, Gde E-250, quality 'A' complete all as specified and as directed. |
| 119 | M&L for preparation of new steel surface of any description, not otherwise described for over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 120 | Dismantling wall panelling and ceiling boards any type (fibre, pulp, insulation etc.including cover fillets and removal of debris complete all as specified and as directed. |
| 121 | Dismantling timber scantling, 40 sq.cm and over in section, in any position as in unframed work complete all as specified and as directed. |
| 122 | Dismantling timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work complete all as specified and as directed. |
| 123 | S&F for 2nd class hardwood, clean sawn on faces as in framed work complete all as specified and as directed. |
| 124 | M&L for 4mm thick plywood grade BWR, type BB fixed to timber frame work with screw complete all as specified and as directed. |
| 125 | M&L for 2nd class hard wood plain fillets, square or rectangular or triangular in section, wrought, sectional area exc. 6.0 sq.cm but not exc. 13.0 sq.cm (as in cover fillets) screwed with nails or brads complete all as specified and as directed. |
| 126 | M&L for 2nd class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails cross sectional area not exc. 3.0 sq.cm complete all as per specified and as directed. |
| 127 | M&L for 20mm thick 2nd class hardwood boarding, planed on one side with butt joints with nails in any situation (except flooring and skirting) complete all as per specified and as directed. |
| 128 | M&L for preparation of new wood based surfaces of any description, not otherwise described for over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and as directed. |
| 129 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and as directed. |
| 130 | M&L for 20mm thick rendering in cement mortar (1:4) as on fair faces of brick work or concrete surfaces, finishing even and smooth without using extra cement complete all as specified and as directed. |
| 131 | M&L for 15mm thick rendering in cement mortar (1:6) as on one side of lathing, finished plastered surface even and smooth without using extra cement complete all as specified and as directed. |
| 132 | S&F as in repairs in GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and as directed. |
| 133 | Demolition and breaking up drain pipes of internal dia 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar etc. complete all as specified and as directed. |
| 134 | M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 110 mm bore complete all as specified and as directed. |
| 135 | M&L for vitrified ceramic coloured tiles of size 10mm thick (square/rectangular), area of each tile not exceeding 0.36 sqm fixed on floor, etc., set and jointed in neat cement slurry and pointed in white or colured cement to match, over and including 10mm thick screed bedding layer in cement mortar (1:4) as backing layer for tiles complete all as specified and as directed.NOTE : The contract sum shall be derived by deducting the amount shown in Schedule of Credit attached to this tender from total amount of Schedule 'A'/BOQ. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender