Tender For special Repair / Replacement Of External Electrification, Lighting Arrangements And Illumination At Hq 60 Inf Bde In The Area Of Age (U) E/S No-1 Under Ge (U) E/S, Delhi Cantt-10
Tender Value
40.50 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
18 days left
EMD
81000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair / Replacement Of External Electrification, Lighting Arrangements And Illumination At Hq 60 Inf Bde In The Area Of Age (U) E/S No-1 Under Ge (U) E/S, Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in soft/losse soil) for laying of cables or GI pipe and getting out and levelling of bottom suface to required level complete all as specified and directed by Engineer- in- Charge. |
| 2 | Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables etc, complete all as specified and directed by Engineer- in- Charge.Note : Measurement shall be taken after punning down. |
| 3 | S&F of sub class B bricks having minimum compressive strength 75 Kg/ Sq cm laid in trenches for cable protection etc complete all as specified and directed by Engineer- in- Charge. |
| 4 | All as per Item No-3 above but using old bricks retrieved from excavation under Item No. 1 complete all as specified and directed by Engineer- in- Charge. |
| 5 | Material and labour for returning filling in, including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick complete all as specified and directed by Engineer- in- Charge. |
| 6 | Material and labour for removing excavated material (ie soil) from site to a distance n. exc 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point complete all as specified and directed by Engineer- in- Charge. |
| 7 | Material and labour for boring of hole under road/pavement/hard standing or any other situation by mannual means and suitable for passing of GI pipe 40 to 100 mm bore and making good both ends complete all as specified and directed by Engineer- in- Charge. |
| 8 | All as per item No 7.0 above but of size 80 mm dia complete all as specified and directed by Engineer- in- Charge. |
| 9 | All as per item No 7.0 above but of size 50 mm dia complete all as specified and directed by Engineer- in- Charge. |
| 10 | Supply and fixing of outdoor type stainless steel (SS 316) cubical enclosure compartmentalized exterior and interior mirror type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc.The enclosure shall be made of 2 mm thick SS 316 sheet. The fixing of double doors shall be on SS hinges with anti-theft provision (the door can’t be removed from enclosure without cutting enclosure). All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 316. Sliding handle and locking arrangement front and rear both side . Enclosure shall be suitable for AC supply system 415 volts 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with insulated Aluminium bus bar installed on proceline/ SMC insulator of rating not less than 1.5 times of incoming/ outgoing ACB/MCCBs . IP-55 class protection and mounted on channel 75 mm welded with panel of SS 316 with 04 Nos foundation bolt of size not less than 20 mm dia and 300 mm long. The enclosure shall have provision of cable alley . Cable entry from bottom side including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked, 1100 volts grade of appropriate size (but not less than 2.5 sqmm).INCOMING:- (i) MCCB 4 pole,400 Amps, 50 Hz, 415 Volts, 36 KA Adjustable Thermal and Adjustable Magnetic setting- 1 Nos (ii) Voltmeter digital - 01 No (iii) Ammeter digital type - 01 No (iv) CT ratio 600/5 Amp class-1 ISI marked - 01 Set of three (v) Indicating LED lamp one set of three OUTGOINGS:- (i) MCCB 4 pole, 160 Amps, 50 Hz, 415 Volts, 25 KA Adjustable Thermo and Fixed Magnetic setting - 01 No(iii) MCCB 4 pole, 100 Amps, 50 Hz, 415 Volts, 16 KA Adjustable Thermo and Fixed Magnetic setting - 04 No |
| 11 | All as item no-10.0 above (here in before) but as followings:-INCOMING:- (i) MCCB 4 pole, 250 Amps, 50 Hz, 415 Volts, 36 KA Adjustable Thermal and Adjustable Magnetic setting- 1 Nos (ii) Voltmeter digital type - 01 No (iii) Ammeter digital type - 01 No (iv) CT ratio 250/5 Amp class-1 ISI marked - 01 Set of three (v) Indicating LED lamp one set of three OUTGOINGS:- (i) MCCB 4 pole, 125 Amps, 50 Hz, 415 Volts, 25 KA Adjustable Thermal and Adjustable Magnetic setting- 1 Nos(ii) MCCB 4 pole 100 Amps, 50 Hz, 415 Volts, 16 KA Adjustable Thermal and Adjustable Magnetic setting- 2 Nos (iii) MCCB 4 pole, 63 Amps, 50 Hz, 415 Volts, 16 KA Adjustable Thermal and Adjustable Magnetic setting- 4 Nos (iv) Space free for one compartment. Please Enable Macros to View BoQ information |
| 12 | All as item no-10.0 above (here in before) but as followings:-INCOMING:- (i) MCCB 4 pole, 250 Amps, 50 Hz, 415 Volts, 36 KA Adjustable Thermal and Adjustable Magnetic setting- 1 Nos (ii) Voltmeter digital type - 01 No (iii) Ammeter digital type - 01 No (iv) CT ratio 250/5 Amp class-1 ISI marked - 01 Set of three (v) Indicating LED lamp one set of three OUTGOINGS:- (i) MCCB 4 pole, 125 Amps, 50 Hz, 415 Volts, 25 KA Adjustable Thermal and Adjustable Magnetic setting- 1 Nos(ii) MCCB 4 pole 100 Amps, 50 Hz, 415 Volts, 16 KA Adjustable Thermal and Adjustable Magnetic setting- 2 Nos (iii) MCCB 4 pole, 63 Amps, 50 Hz, 415 Volts, 16 KA Adjustable Thermal and Adjustable Magnetic setting- 4 Nos (iv) Space free for one compartment. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender