Tender For Repair/Maint Of Dg Sets, Amf Panels Including Control Panels/ Cables And Other Connected Works Under Ge (Nw) Vasco
Tender Value
90 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
22 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Dg Sets, Amf Panels Including Control Panels/ Cables And Other Connected Works Under Ge (Nw) Vasco
BOQ
| Sl. No. | Item Description |
| 1 | Service Charges for Carrying out 'C' Check maintenance for DG sets from authorised rep or trained service engineer from the OEM of DG set of 320 KVA capacity injector & valve tappet setting, checking of vibration damper, checking turbocharger, oil leakage, tightening mounting screws & nuts, replacement of filters & oil, checking inlet & Exhaust manifold cap, screws, checking of fan hub & water pump, removing the existing unserviceable engine oil, clean the oil sump and refilling with required quantity of new oil & coolant top up, charging of battery, filling of distilled water, cleaning of radiator fins by using blower to the entire satisfaction of Engineer-in-Charge, trial & testing etc. complete all as specified and directed.(Note :- (a) New spares required for 'C' check will be measured and paid separately as supply only. |
| 2 | (a) Supply only Kit fuel filter |
| 3 | (b) Supply only Element for Lubrication oil filter. |
| 4 | (c) Supply only Kit Element of super bypass filter. |
| 5 | (d) supply only fuel Feed pump |
| 6 | (e)Supply only Kit Fuel & coolent hoses |
| 7 | (f) Supply only Belt set |
| 8 | (g)Supply only Air Cleaner element outer and inner complete. |
| 9 | (h)S&F in repairs Low lub oil pressure switch with adaptor |
| 10 | Service Charges for Carrying out 'C' Check maintenance for DG sets from authorised rep or trained service engineer from the OEM of DG set of 200/250 KVA capacity injector & valve tappet setting, checking of vibration damper, checking turbocharger, oil leakage, tightening mounting screws & nuts, replacement of filters & oil, checking inlet & Exhaust manifold cap, screws, checking of fan hub & water pump, removing the existing unserviceable engine oil, clean the oil sump and refilling with required quantity of new oil & coolant top up, charging of battery, filling of distilled water, cleaning of radiator fins by using blower to the entire satisfaction of Engineer-in-Charge, trial & testing etc. complete all as specified and directed.(Note :- (a) New spares required for 'C' check will be measured and paid separately as supply only. |
| 11 | (a) Supply only Lubrication oil filter |
| 12 | (b) Supply only Air Cleaner element outer and inner complete. |
| 13 | (c) Supply only Fuel Filter |
| 14 | (d) Supply only Kit Fuel & coolent hoses |
| 15 | (e) Supply only Belt set |
| 16 | (f) Supply only bypass filter |
| 17 | (g) supply only fuel Feed pump |
| 18 | Service Charges for Carrying out 'C' Check maintenance for DG sets from authorised rep or trained service engineer from the OEM of DG set of 160/180 KVA capacity injector & valve tappet setting, checking of vibration damper, checking turbocharger, oil leakage, tightening mounting screws & nuts, replacement of filters & oil, checking inlet & Exhaust manifold cap, screws, checking of fan hub & water pump, removing the existing unserviceable engine oil, clean the oil sump and refilling with required quantity of new oil & coolant top up, charging of battery, filling of distilled water, cleaning of radiator fins by using blower to the entire satisfaction of Engineer-in-Charge, trial & testing etc. complete all as specified and directed.(Note :- (a) New spares required for 'C' check will be measured and paid separately as supply only. |
| 19 | (a) Supply only Lubrication oil filter element |
| 20 | (b) Supply only Fuel Filter element |
| 21 | (c) Supply only Air Cleaner element outer and inner complete. |
| 22 | (d) Supply only Kit Fuel & coolent hoses |
| 23 | (e) Supply only Belt set |
| 24 | (f) supply only fuel Feed pump |
| 25 | Service Charges for Carrying out 'C' Check maintenance for DG sets from authorised rep or trained service engineer from the OEM of DG set of 100/125 KVA capacity injector & valve tappet setting, checking of vibration damper, checking turbocharger, oil leakage, tightening mounting screws & nuts, replacement of filters & oil, checking inlet & Exhaust manifold cap, screws, checking of fan hub & water pump, removing the existing unserviceable engine oil, clean the oil sump and refilling with required quantity of new oil & coolant top up, charging of battery, filling of distilled water, cleaning of radiator fins by using blower to the entire satisfaction of Engineer-in-Charge, trial & testing etc. complete all as specified and directed.(Note :- (a) New spares required for 'C' check will be measured and paid separately as supply only. |
| 26 | (a) Supply only Filter Fuel element |
| 27 | (b) Supply only Cartridge, Lub oil filter |
| 28 | (c) Supply only Air Cleaner element outer and inner complete. |
| 29 | (d) Supply only Kit Fuel & coolent hoses |
| 30 | (e) Supply only Belt set |
| 31 | (f) Supply only fuel Feed pump |
| 32 | Service Charges for Carrying out 'C' Check maintenance for DG sets from authorised rep or trained service engineer from the OEM of DG set of 30/35/40 KVA capacity injector & valve tappet setting, checking of vibration damper, checking turbocharger, oil leakage, tightening mounting screws & nuts, replacement of filters & oil, checking inlet & Exhaust manifold cap, screws, checking of fan hub & water pump, removing the existing unserviceable engine oil, clean the oil sump and refilling with required quantity of new oil & coolant top up, charging of battery, filling of distilled water, cleaning of radiator fins by using blower to the entire satisfaction of Engineer-in-Charge, trial & testing etc. complete all as specified and directed.(Note :- (a) New spares required for 'C' check will be measured and paid separately as supply only. |
| 33 | (a) Supply only Lubrication oil filter element |
| 34 | (b) Supply only Fuel Filter element |
| 35 | (c) Supply only Kit Fuel & coolent hoses |
| 36 | (d) Supply only Belt set |
| 37 | (e) Supply only Air Cleaner element outer and inner complete. |
| 38 | (f) supply only fuel Feed pump |
| 39 | Service Charges for Carrying out 'C' Check maintenance for DG sets from authorised rep or trained service engineer from the OEM of DG set of 20/25 KVA capacity injector & valve tappet setting, checking of vibration damper, checking turbocharger, oil leakage, tightening mounting screws & nuts, replacement of filters & oil, checking inlet & Exhaust manifold cap, screws, checking of fan hub & water pump, removing the existing unserviceable engine oil, clean the oil sump and refilling with required quantity of new oil & coolant top up, charging of battery, filling of distilled water, cleaning of radiator fins by using blower to the entire satisfaction of Engineer-in-Charge, trial & testing etc. complete all as specified and directed.(Note :- (a) New spares required for 'C' check will be measured and paid separately as supply only. |
| 40 | (a) Supply only Lubrication oil filter element |
| 41 | (b) Supply only Fuel Filter element |
| 42 | (c) Supply only Air Cleaner element outer and inner complete. |
| 43 | (d) Supply only Kit Fuel & coolent hoses |
| 44 | (e) Supply only Belt set |
| 45 | (f) supply only fuel Feed pump |
| 46 | Service Charges for Carrying out 'C' Check maintenance for DG sets from authorised rep or trained service engineer from the OEM of DG set of 15 KVA capacity injector & valve tappet setting, checking of vibration damper, checking turbocharger, oil leakage, tightening mounting screws & nuts, replacement of filters & oil, checking inlet & Exhaust manifold cap, screws, checking of fan hub & water pump, removing the existing unserviceable engine oil, clean the oil sump and refilling with required quantity of new oil & coolant top up, charging of battery, filling of distilled water, cleaning of radiator fins by using blower to the entire satisfaction of Engineer-in-Charge, trial & testing etc. complete all as specified and directed.(Note :- (a) New spares required for 'C' check will be measured and paid separately as supply only. |
| 47 | (a) Supply only Lubrication oil filter element |
| 48 | (b) Supply only Fuel Filter element |
| 49 | (c) Supply only Air Cleaner element outer and inner complete. |
| 50 | (d) Supply only Kit Fuel & coolent hoses |
| 51 | (e) Supply only Belt set |
| 52 | (f) supply only fuel Feed pump |
| 53 | Service Charges for Carrying out 'C' Check maintenance for DG sets from authorised rep or trained service engineer from the OEM of DG set of 62.5 to 82.5 KVA capacity injector & valve tappet setting, checking of vibration damper, checking turbocharger, oil leakage, tightening mounting screws & nuts, replacement of filters & oil, checking inlet & Exhaust manifold cap, screws, checking of fan hub & water pump, removing the existing unserviceable engine oil, clean the oil sump and refilling with required quantity of new oil & coolant top up, charging of battery, filling of distilled water, cleaning of radiator fins by using blower to the entire satisfaction of Engineer-in-Charge, trial & testing etc. complete all as specified and directed.(Note :- (a) New spares required for 'C' check will be measured and paid separately as supply only. |
| 54 | (a) Supply only Lubrication oil filter element |
| 55 | (b) Supply only Fuel Filter element |
| 56 | (c) Supply only Air Cleaner element outer and inner complete. |
| 57 | (d) Supply only Kit Fuel & coolent hoses |
| 58 | (e) Supply only Belt set |
| 59 | (f) supply only fuel Feed pump |
| 60 | Service Charges for Carrying out 'C' Check maintenance for DG sets from authorised rep or trained service engineer from the OEM of DG set of 500 KVA capacity injector & valve tappet setting, checking of vibration damper, checking turbocharger, oil leakage, tightening mounting screws & nuts, replacement of filters & oil, checking inlet & Exhaust manifold cap, screws, checking of fan hub & water pump, removing the existing unserviceable engine oil, clean the oil sump and refilling with required quantity of new oil & coolant top up, charging of battery, filling of distilled water, cleaning of radiator fins by using blower to the entire satisfaction of Engineer-in-Charge, trial & testing etc. complete all as specified and directed.(Note :- (a) New spares required for 'C' check will be measured and paid separately as supply only. |
| 61 | (a) S & F in repairs Kit, fuel filter |
| 62 | (b) S & F in repairs Element for Lubrication oil filter. |
| 63 | (c) S & F in repairs Kit, Element of super bypass filter. |
| 64 | (d) S & F in repairs Air filter Outer element. |
| 65 | (e) S & F in repairs Air Filter inner element. |
| 66 | (f) Supply only Kit Fuel & coolent hoses |
| 67 | (g) Supply only Belt set |
| 68 | (h) S&F in repairs fuel feed pump Please Enable Macros to View BoQ information |
| 69 | (h) S&F in repairs fuel feed pump Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender