Tender For Special Repair To Bldg No P-08/01 To 04 Qtrs, Bathroom Bldg No A-10B, Provn Of Interlocking Pathway/Hard Standing In Front Of Bldg No P-27 And Provn Of Chain Link Fencing Arround The Building No A-6 At Alhilal Mil Stn.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Aug 2026
18 days left
EMD
86800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-08/01 To 04 Qtrs, Bathroom Bldg No A-10B, Provn Of Interlocking Pathway/Hard Standing In Front Of Bldg No P-27 And Provn Of Chain Link Fencing Arround The Building No A-6 At Alhilal Mil Stn.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated sheeting any gauge, thickness, including Nainital or similar pattern roof covering etc complete all as specified and as directed. |
| 2 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling timber scantling 40 sq cm & over in section , any position in unframed work complete all as specified and directed. |
| 5 | S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W (Gde-250) quality-A complete all as specified and directed. |
| 6 | S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed |
| 7 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 8 | Dismantling of wall & ceiling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets of any thickness, including cover fillets.complete all as specified and directed. |
| 9 | S&F Providing and fixing tiled false ceiling of size 595 x 595mm in true horizontal level suspended on interlocking gypric metal grid of hot dipped galvanised steel section (galvanized @ 120 gsm/sqm, both side inclusive) consisting of 3600mm long main 'T' runner size 24x38mm and 0.30mm thick,1200mm long cross 'T' of size 24 x 25mm and 0.30mm thick, 600mm secondary cross 'T' of size 24 x 25mm and 0.30mm thick, bottom exposed capping of width 24mm of all T-sections shall be of 0.25mm thick PPGI, wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers Main 'T' runners are then suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 8mm dia and 45mm long dashfasteners, 4mm GI adjustable rods with galvanised buttrtfly level clips of size 85x30x0.8mm spaced at max 1200mm centre to centre along main 'T' and not more than 150mm from spliced joints.The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall, then 1200mm long cross 'T' is interlocked between the main 'T' at 600mm center to center to form a grid of 1200x600mm and then secondary cross 'T' of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross tees at the ends having length more than 600mm are,to be supported independently. Finally white coloured Gyproc 8mm thick Dew Drop/Granular tiles of size 595x595mm having foil on backside & PVC paper on front side wrapped around edges to be placedin grid complete all as specified and directed. |
| 10 | Demolition of brick work or stone /boulder masonry, built in CM, incl all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed. |
| 11 | M&L Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6 complete all as specified and directed. |
| 12 | Demolition of cement concrete (Unreinforced) in ground floor and pavings n exc 15cm thick ness (below or above ground level) complete all as specified and directed. |
| 13 | M&L Plain cement concrete, M-10 (Nominal Mix) type C-1 1:3:6 (using 40 mm graded crushed stone aggregates) as in surface channels or drains etc., complete all as specified and directed. |
| 14 | M&L 50mm thick, PCC M-10 (Nominal Mix), type C-2 (using 20mm graded crushed stone aggregates) as in plinth protection/ foot path finished even and smooth without using extra cement, complete all as specified and directed. |
| 15 | Taking down cement plaster incl tiles of any description on brick or stone or cement concrete walls incl raking out joints, hacking for key, scrubbing down with water etc, complete all as sofd and directed. |
| 16 | M&L Rendering 15 mm thick on stone masonry or other than fair faces of brick wall in CM 1:4 finished even and fair without using extra cement, complete all as spfd and directed |
| 17 | M&L Rendering 15 mm thick on stone masonry or other than fair faces of brick wall in CM 1:6 finished even and fair without using extra cement, complete all as spfd and directed |
| 18 | M & L for peparation of newly plastered or unplastered surfaces of walls and applying two coats of distempering walls with distemper oil emulsion and applying plaster of paris putty of 1 mm thickness over newly plastered wall surfaces including preparation of surfaces even and smooth complete all as specified and directed |
| 19 | M & L for peparation of old plastered or unplastered surfaces of walls and applying two coats of distempering walls with distemper oil emulsion and applying plaster of paris putty of 1 mm thickness over newly plastered wall surfaces including preparation of surfaces even and smooth complete all as specified and directed |
| 20 | M & L Preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint ,complete all as specified and directed. |
| 21 | M & L Preparing old surface of ceiling and applying two coats of white wash on old decorated surface ,complete all as specified and directed. |
| 22 | Taking down chowkats or frames incl shutters (w/o taking off shutters from the frames) exc. 1.50 sqm but n.exc. 4 sqm each and removing from site, complete all as spfd and directed. |
| 23 | Taking down chowkats or frames incl shutters (w/o taking off shutters from the frames) n. exc. 1.50 sqm each and removing from site, complete all as spfd and directed. |
| 24 | S & F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed. |
| 25 | S & F Pressed steel frames of size 100 x 60/105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed. |
| 26 | M&L Plain cement concrete, M-15 (Nominal mix), type B-1 (Using 20mm graded stone aggregates) as in filling of steel chowkats or frames, cills and hold fast etc complete all as specified and as directed. |
| 27 | S&F 2nd class HW (Sal / Hollock) factory made, plain framed, panelled shutters (two panels) 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35mm thick fitted to chowkats, complete all as spfd and directed. |
| 28 | S&F 35mm thick factory made 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze (w/o sash bars), edges of framing plain, chamferred or rounded, fitted with cut and mitred beads for screwing glass etc size of member as specified in SSR Pt-I, Section 8, Clause 8.24(a) complete all as specified and directed. |
| 29 | S & F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with aluminium wire staples.complete all as specified and directed. |
| 30 | M&L Preparing new surface of steel of any description, over 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. |
| 31 | M & L Prepartion of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 32 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc. 0.50 sqm in each pane, complete all as spfd and directed |
| 33 | S&F Box type steel windows/ventilators comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay doytabled at welded incl 2 Nos tower bolts 150 mm long for each leaf and 8 mm square bar grills at spacing as shown on drg welded to FI frame work,incl other fittings,hinges,handles tarred hold fast PCC blocks etc. complete all as specified and as directed. |
| 34 | S&F Butt hinges, extruded alu- minium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-2, 100mm long, complete all as specified and directed. |
| 35 | S&F Aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and directed. |
| 36 | S&F Aluminium anodised barrel tower bolt of extruded section, 100mm long complete all as specified and directed. |
| 37 | S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed. |
| 38 | S&F 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 39 | S&F 300mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 40 | Dismantling floor, hearth wall tiling inclid cement mortar bedding (but not backing) removing servicable tiles to store & rubbish off the premises.complete all as specified and directed. |
| 41 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matcd and laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed. |
| 42 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed. |
| 43 | M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matcr and including 10 mm thick backing coat in cement mortar 1:4, complete all as specified and directed. |
| 44 | S&F 20 mm thick Granite (Black/Green ) stone machine cut, in Kitchen slab laid over cement screed and jointed with cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 45 | M&L for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 25mm thick as in leveling course of flooring complete all as specified and directed. |
| 46 | S&F Solid PVC door frame of size 50x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S&F in opening as per specification & drawing shown in SSR Part-II, complete all as spfd and directed. |
| 47 | S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement S&F in frames at site as per specification and drawing shown in SSR Part-II, complete all as specified and directed. |
| 48 | Dismantling of 75 / 100 mm dia cast/PVC drain pipes, jointed in cement mortar fixed in trenches and taking out of trenches removing where directed complete all as specified and directed. |
| 49 | S&F PVC (SWR) pipes 75 mm bore dia, single socketed, in any length with rubber ring joints fixed to walls/ laid in trenches or in floors etc, complete all as specified and directed. |
| 50 | S&F PVC (SWR) pipes 110 mm bore dia, single socketed in any length with rubber ring joints fixed to walls/ laid in trenches etc , complete all as specified and directed. |
| 51 | S & F 75 mm bore PVC Bends (SWR) |
| 52 | S & F 75 mm bore PVC Bends (SWR) with ovel acces door |
| 53 | S & F 75 mm bore PVC (SWR) T- Junction with ovel acces door |
| 54 | S & F 110 mm bore PVC Bends (SWR) |
| 55 | S & F 110 mm bore PVC Bends (SWR) with ovel acces door |
| 56 | S & F 110 mm bore PVC (SWR) single -T equal or unequal |
| 57 | S & F 110 mm bore PVC (SWR) single-T with ovel acces door |
| 58 | S & F PVC (SWR) floor trap of 75mm dia plain with grating including jointing with solvent cement |
| 59 | S&F PVC (SWR) vent cowl 110 mm dia |
| 60 | S&F in repair 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (including dismantling) complete all as specified and directed. |
| 61 | S&F Vitreous China wash down water closet pan Europian type (pedestal pattern), connection to trap 'P' or 'S' and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old one complete all as specified and directed. |
| 62 | S&F CP jet spray hygenic spray jet for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed/ |
| 63 | S&F 10 Liter capacity PVC symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as specified and directed. |
| 64 | S&F PVC Connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 65 | S&F Vitreous china, wash hand basin with pedestral (white) of size 550mmx400mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends (fixed in repair), complete all as specified and directed. |
| 66 | S&F Aluminium anodised tubular towel rail, 20mm dia, 60mm long, CP with a pair of brackets, fixed to wall with CP brass screw and PVC rowl plugs ,complete all as spfd and directed. |
| 67 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and directed. |
| 68 | S&F in repair CP bib taps 15mm bore cast copper alloy with crutch or butterfly, handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 69 | S&F in repair Pillar taps 15 mm bore cast alloy with capasten head screwed down high pressure with without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 70 | S&F concealed type with wall flange, stop valves 15mm bore, cast copper alloy, fancy type cromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 71 | S&F in repair 15 mm bore stop valve/angle cock cast copper alloy with screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 72 | S&F in repair 20 mm Gun metal Gate valves fitted for iron pipe complete all as specified and directed. |
| 73 | S&F swivel shower along with shower arm 15mm size 195mm long with bend of 45 degree with flangeof PTMT any colour for fixing with 15mm dia pipe (Min weight 40 gms) complete All as specified and as directed. |
| 74 | Taking up or down 15mm steel tubing and connections for pipe complete all as specified and directed. |
| 75 | Taking up or down 20mm steel tubing and connections for pipe complete all as specified and directed. |
| 76 | S&F 15mm GI water tubes medium grade with all fittings and fixed complete to walls and ceilling or laid in floors complete all as specified and directed. |
| 77 | S&F 20mm GI water tubes medium grade with all fittings and fixed complete to walls and ceilling or laid in floors complete all as specified and directed. |
| 78 | Cutting chase, pinning in making good to faceing where required and pointing in cement mortar 1:3 to ends or edges of landing, and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10cm but n exc 20cm.complete all as specified and directed. |
| 79 | M & L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, inishing and sweeping extra sand; complete all as specified and directed. |
| 80 | M & L Colour chequered cement concrete tiles, machine pressed, factory made of size 300 x 300 x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 81 | M & L Prelaminated particle board of thickness 18/19 mm, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 82 | S&F 2nd class SW plain fillets, square / rectangular, wrought face of sectional area n.exc 3 Sqcm, securing with screw complete all as specified and directed. |
| 83 | S&F kitchen plate rack made of SS 0.80mm thick sheet standered size 900x900x325mm and designed as approved by GE fixed to wall with wooden/ plastic plug and Screw complete all as specified as directed. |
| 84 | S&F kitchen basket fabricated with stainless steel section (SS-304), best quality of size 450 x 500 x 100 mm for different use such as placing plain plate/dish/cup & saucer/cutlery/thali etc fixed in position with one pair telescopic Channel mild steel chromium plated, roller type, heavy duty complete all as specified and directed. |
| 85 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 86 | S&F S & F 30mm Continuous (piano) hinges, mild steel, bright finish or elec- trogalvanised , complete all as specified and directed. |
| 87 | Removing of existing filling in sunken floor of WC of any area and repair to sunken floor with 15mm thick plastering in CM 1:3 of internal surface with WPC, than applying High performance two component brushable elastomeric polyurea waterproofing coating cold applied brush applied ultraseal BA or approved equivalent (in sunken portion of WC & Floor trap) liquid membrane with white in colour with a elongation of 500% and tensile strength of 5 N/sq mm @ DFT 1mm as per ASTM D 2370,73 % solid content, shore A Hardness of min 70. The system include final base preparation, epoxy primer application @ 200-250 gms/sqmt depending upon the surface porosity and applying Home shield Ultraseal BA or approved equivalent in two coats at 1.5 Kg per sqm providing 1.2mm DFT etc, complete as per manufacture specifications and testing to water tightness then filling with Brick bats & PCC 1:2:4 type B1 using 20mm graded stone aggregate and inserting 40mm bore 70cm long GI water tubing to the wall complete all as specified and directed. (NOTE :-WC & tiles shall be measured and paid separately) |
| 88 | Supply only liquid water proofing compound complete all as specified and directed. |
| 89 | S&F 25 mm Stainless Steel drapery rod with a pair of stainless stell coated M S clamp to hold drapery rod and decorative attachment at one or both ends of drapery rod fixed in opening door/window (each opening n exc 1.50m contained with a pair of clamps and a pair of side ornament attachments) complete all as specified and as directed. |
| 90 | M&L 75mm thick, type C-2 , 1:3:6 (using 40mm graded crushed stone aggregates) as in plinth protection/ foot path finished even and smooth without using extra cement, complete all as specified and directed. |
| 91 | M&L Rendering 10 mm thick on stone masonry or fair faces of brick wall in CM 1:6 finished even and smooth without using extra cement, complete all as spfd and directed. |
| 92 | M&L Rendering 5 mm thick on ceiling in CM 1:3 finished even and fair without using extra cement, complete all as spfd and directed. |
| 93 | M & L Preparing newly plastered surface of wall and applying three coats of white wash ,complete all as specified and directed. |
| 94 | M & L Preparing newly plastered surface of ceiling and applying three coats of white wash ,complete all as specified and directed. |
| 95 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of requiredsize with necessary full body threaded star headed counter sunk S.S screws,complete all as specified and directed. |
| 96 | S&F 3 mm thick figured glass pin head type and glazing with oil putty in squares n.exc. 0.50 sqm in each pane, complete all as spfd and directed |
| 97 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 98 | S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165, Complete all as spfd and directed. |
| 99 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 100 | S & F 110 mm bore PVC (SWR) T-Double Junction with ovel acces door complete all as specified and directed. |
| 101 | S&F Vitreous china squatting pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVS (SWR) 'S' trap, provn of lime concrete and jointing to flush pipe complete all as specified and directed. |
| 102 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), connection to trap 'P' or 'S' and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old one complete all as specified and directed. |
| 103 | S&F in repair Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) incl Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe,inl Waste fittings, brass,chromium plated for glazedware sinks, basins, etc.complete all as specified and directed. |
| 104 | S&F in repairs Wash basins, Vitreous China (oval type) 550 x 400mm size, including cutting for and pinning in ends of brackets or erecting stand but incl waste pipe ,Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 105 | S&F in repair Vitreous china urinal partition white of size 310x700 mm. complete all as specified and directed. |
| 106 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for rough finished surface complete all as specified and directed. |
| 107 | M&L for Reinforced cement concrete 1:2:4 Type B1, (20 mm graded aggregate) as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and the like including demolition of existing RCC Members. |
| 108 | M&L TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as spfd and directed. |
| 109 | M&L TMT bar 6 to 8mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for column, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as spfd and directed. |
| 110 | M&L 18 to 20mm thick Granite (of any type) work Kitchen slabs , window sill etc. (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all as specified and directed. |
| 111 | S&F in repairs swivel shower of PTMT any colour for fixing with 15mm dia pipe (Min weight 40 gms) complete All as specified and as directed |
| 112 | M&L for preparation for removal of existing treatment, all loose gravel cement mortar, dirst, oil, grease and foreign material by jet of dry air, roughening and cleaning the surface mechanically or by grinding to make it smooth before application loose existing bituminous material manually and with heat torch gun to get smooth plain finished surface with no loose material on surface. Repair all joints & cracks and apply primer with SmartCare Epoxy Primer to seal the pores/cracks and enhance the adhesion of the coating.Apply first coat Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110, having minimum elongation of 350%, tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50mm and allow it to dry. Apply second of undiluted coat @ 0.45ltr/sqm. Apply third and final coat undiluted @ 0.45ltr/sqm as per manufactures specification having warranty for 12 years. |
| 113 | M&L 15 mm thick rendering on fair faces of concrete surface in cm 1:3 to be finished even and smooth with out suing extra cement under roof treatment mixed with water proofing compound (is to be measured and paid seperately) complete all as specified and directed. |
| 114 | M & L Plain cement concrete, M-15 (Nominal Mix), type B-0;1:2:4 (using 12.5mm graded aggregates) as in roof kerbs, mud stops, roof padding etc using water proofing compound, complete all as specified and directed. |
| 115 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil.complete all as specified and directed. |
| 116 | M&L for PCC 1:3:6 type-C-2 (using 40mm graded aggregate)in foundations,filling and mass concrete complete all as specified and directed/ |
| 117 | Providing reinforced precast cement concrete 1:2:4 tyoe B-1 (using 20mm aggregate) as in cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face set in CM 1:4 complete all as specified and directed. |
| 118 | M&L for repairing the edges / corner of Chajja / roof projection and similar work by removing of plaster width / girth exceeding 15 cm & n exc 30 cm and making good with 15 mm thick rendering in cement mortar 1:3 to match with existing surface complete all as specified and directed. |
| 119 | M&L extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds mitred/stopped end etc complete all as specified and directed. |
| 120 | S&F in repairs soap dish any type fixed to plugs with chromium plated brass screws complete complete all as specified and directed. |
| 121 | M & L brick work with sub class -B bricks, straight or curved on planto any radius in half brick thick wall built in CM 1:4, complete all as specified and directed |
| 122 | M & L brick work with sub class -B bricks, straight or curved on plan exc 6mtr mean radius built in CM 1:6., complete all as specified and directed |
| 123 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 124 | M&L for 75 mm thick cement concrete 1:4:8 type D-2 (40 mm graded crushed stone aggregates) as in Sub base etc. complete all as specified and directed. |
| 125 | M & L coloured tiles of size 400mm x 400mm x 12mm laid in floor or wall over 15mm screed bed in CM 1:4 with grey cement and pigment, any shape and size complete all as specified and directed. |
| 126 | M & L Providing cement concrete Type B0 1:2:4 (12.5 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed. |
| 127 | M&L Walling random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, build in cement mortar 1:6 complete all as specified and directed. |
| 128 | M&L for Plain cement concrete, Type B-2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete etc, complete all as specified and directed. |
| 129 | M&L Mild steel work as in posts & struts in fencing using angle, iron or other sections, including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting and riveting etc. and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 130 | Mild steel galvanized, chain link fencing size or any type complete all as specified and directed. |
| 131 | Fixing only chain link fencing includingline wires, any mesh, size and type to any type of standards, rails, starting bolts, etc. includind provision of binding wires complete all as specified and directed. |
| 132 | M&L Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other ends, or screwed both ends each screw to be fitted with washer and one hexagonal or square nuts, length of bolt not exceeding 30mm long, diameter of shank 12mm, dia of neck exc 20mm n exc 25mm, complete all as specified and directed. |
| 133 | S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixed to any type of standard rails straining bolts, including securing or tying at crossing with provision of galvanised mild steel wire, staple or steel pins etc, complete all as specified and directed. |
| 134 | Mild steel Round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 135 | M&L preparation of new steel surfaces of any description not otherwise described, N exc 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 136 | M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil.complete all as specified and directed. |
| 137 | M&L for RCC 1:2:4 type B1(20mm aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 138 | M&L for RCC 1:2:4 type B1 (20mm aggregate) as in Columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 139 | M&L for form work to edges of pillars and columns for fair finished surface of concrete, complete all as specified and directed |
| 140 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed |
| 141 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed. |
| 142 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed. |
| 143 | M&L for Framed work as in doors or gates of angle or other section with gusset Fe 290-W (Gde E- 165) plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 144 | M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed. |
| 145 | Taking down carefully existing aluminum / copper point wiring light, fan, socket or power point complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, fan regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls,floors, etc, complete all as specified and directed. |
| 146 | Taking down unserviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed. |
| 147 | Taking down unserviceable sub main wiring of any type and any size from wall, ceiling etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 148 | Taking down unserviceable sub main wiring of any type and any size from wall, ceiling etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender