Tender For Addition/ Alteration To Certain Rooms Of Ground Floor Of P-2 Building Under Ge(I) Cg Chennai
Tender Value
40 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
15 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration To Certain Rooms Of Ground Floor Of P-2 Building Under Ge(I) Cg Chennai
BOQ
| Sl. No. | Item Description |
| 1 | ADDITION ALTERATION B/R WORK |
| 2 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified complete all as specified and as directed. |
| 3 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Square metre and not exceeding 4 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified complete all as specified and as directed. |
| 4 | Supply and fix Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + - 0.2mm ) Window profile with hollow section with multi chamber, frame (60mm * 58mm) sash (60mm * 73mm) T profile (One vertical length in between two shutters) (60mm * 74mm) Glazing bead (35mm * 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket 1.2 - 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm * 27.5mm) T profile (27mm * 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass Note: [i] The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.[ii]. Area exceeding 1.00 sqm but not exceeding 2.00 sqm each complete all as specified and directed. |
| 5 | Supply and Fix plain sheet glass pane, 4.80mm thick, ordinary quality and glazing with neoprene rubber / wooden beads in square exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 6 | Supply and fix dual-layer Zebra Roller Blinds (Day and Night blinds) for windows comprising 100% UV-resistant polyester fabric (minimum 180 GSM) with alternating sheer and opaque horizontal stripes including a heavy-duty extruded powder-coated aluminium headrail/fascia, a minimum 38mm diameter aluminium grooved roller tube, a matching bottom weight/rail, and heavy-duty mounting brackets suitable to operate using a continuous manual stainless steel beaded chain control mechanism for smooth lifting and light adjustment and fixed with all necessary hardware, screws, fasteners etc., complete in all respects as per the manufacturer's specifications and as directed by the Engineer-in-Charge.Note : The unit rate quoted shall be deemed to include the cost of scaffolding (if required), at all heights and levels |
| 7 | Supply and Fix 12mm thick clear toughened glass with double leaf glass door H polish, single connector aqnd door lock, over panel badge, holes cutout, silicon (H shape 600*32) mm handle godrej floor spring and other patch work in main entrance of building including frame alongwith transportation charges etc., complete all as specified and as directed. |
| 8 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precastconcrete articles portions ordered to be dismantled complete all as specified and as directed. |
| 9 | Material and labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in radius, built in in cement mortar(1:6) old size bricks complete all as specified and as directed. |
| 10 | Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key scrubing down with water etc., complete all as specified and as directed. |
| 11 | Material and labour for complete removal of existing treatment from wall and washing, rubbing down and stoping of distempered and painted surfaces incl primer and two coat of OBD complete all as specified and directed. |
| 12 | Material and labour for rendering in Cement Mortar 15mm thick in Cement Mortar 1:4, on any face of brick/concrete surfaces, finished even and smooth without usin extra cement all as specified and as directed. |
| 13 | Material and labour for rendering 5mm thick on fair faces of concrete surfaces in ceilings in Cement mortar 1:3 complete all as specified and as directed. |
| 14 | Material and labour preparation of newly plasterred surfaces of ceilling and applying three coats of white wash complete all as specified and as directed. |
| 15 | Material and labour for preparation of new plastered walls and applying two coats of acrylic distemper over a coat of wall care putty of thickness 1.5mm and alkali resistant primer complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | Material and labour for preparation of newly plastered surface of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 17 | Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets complete all as specified and as directed. |
| 18 | Material and labour for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mmx600mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 8mm thick high Pressure Non Asbestos Fiber Cement decorative Board 8 mm thick (E-Board Classic) in a grid of aluminium duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof eith adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. The last hanger at the end of each main runner should not be interlocked between main runners @ 610mm c/c, as to form 600 mm x 600 mm grid complete all as specified and directed. |
| 19 | Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises to out side MD land etc., complete all as specified and as directed. |
| 20 | Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 21 | Material and labour for 25mm thick Plain Cement concrete 1:2:4, type B-1 using 20mm graded stone aggregate as in sub base flooring complete all as specified and as directed. |
| 22 | Material and labour for Marble work 18 to 20mm thick Makrana Adanga (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:6) for flooring including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of approved colour over 20mm thick CM 1:6 over PCC flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match laying floor finishes complete all as specified and as directed. |
| 23 | Material and labour for Marble work 18 to 20mm thick Makrana Adanga (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) for Skirting including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of approved colour over 10 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of 10mm of thick CM 1:3 for skirting / dado complete all as specified and as directed. |
| 24 | ADDITION ALTERATION E/M WORK |
| 25 | Taking down carefully copper / aluminium Point Wiring [Light, Fan, Socket or Power] complete including Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets etc. and making good the disturbed surfaces all as per existing complete all as specified and as directed. |
| 26 | Taking down carefully submain wiring with aluminum conductor cable upto 16 Sqmm in PVC conduit complete including making good the disturbed surface of wall/floor etc and removing material from site for taking credit complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 27 | Taking down carefully submain wiring with aluminum conductor cable upto 16 Sqmm in PVC conduit complete including making good the disturbed surface of wall/floor etc and removing material from site for taking credit complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender