Tender For Construction Of Community Sanitary Complex In Back Side Of New Passenger Shelter At Vadakku Kuruvikulam Village And Panchayat In Kuruvikulam Panchayat Union.
Tender Value
5.92 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
0 days left
EMD
5920
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tenkasi → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Community Sanitary Complex In Back Side Of New Passenger Shelter At Vadakku Kuruvikulam Village And Panchayat In Kuruvikulam Panchayat Union.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Community Sanitary Complex in Back Side of New Passenger Shelter at Vadakku Kuruvikulam Village and Panchayat in Kuruvikulam Panchayat Union. |
| 2 | Earthwork excavation in all classes of Soils and Sub soils except hard rock requiring 1 blasting including initial lead and lift, dressing the excavation upto bed level for Foundation as SS 20 B specification etc., complete |
| 3 | Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of 50 2 all materials to site, labour charges for mixing, laying, compacting and curing concrete etc., complete Base Concrete |
| 4 | Brick work in cement mortar 1:5 mix using country bricks 83/4\\"x4 1/4\\"x23/4\\" and conveyance of all materials to site and all labour charges etc complete |
| 5 | Brick work in cement mortar 1:5 mix using country bricks 83/4\\"x4 1/4\\"x2 3/4\\" and conveyance of all materials to site and all labour charges etc complete |
| 6 | Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for RCC column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete. |
| 7 | Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for RCC column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete. |
| 8 | Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete |
| 9 | Supplying and fabrication of steel including cost and conveyance of bending to shape and 9 tying in position and forming grills for all R.C.C works including cost and conveyance of all materials to site |
| 10 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (water proof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty 13 after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc.. complete). The Putty shoule be got approved by the Executive Engineer before use on work |
| 11 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all 14 floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 12 | Paving the floor with best quality Vetrified ( Such as Morbonite) Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the 14 top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 13 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with 16 colouring pigment at the rate of 0.40 Kg./sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data) |
| 14 | Dadooing walls with following best approved quality, white/colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg/sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 15 | Cement Concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance of 23 all materials to site, labour charges for mixing, laying, compacting and curing concrete etc., complete Base Concrete |
| 16 | Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete |
| 17 | Exterior Emulsion painting two coats with best approved quality and colour paint over 16 one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete. |
| 18 | Supply and Fixing of IWC |
| 19 | Supply and Fixing of EWC |
| 20 | Supply and Fixing of Wood Plastic Composit Door |
| 21 | Sanitary Arrangements Works |
| 22 | 110mm dia 6KSC PVC Pipe |
| 23 | 110mm DPVC Door Elbow |
| 24 | 110mm PVC Tee |
| 25 | 2000 Lit HDPE Tank Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender