Tender For Supply, Delivery And Installation Of Pumping Machineries And Other Electromechanical Accessories For Drinking Water Supply 60M3 Per Day At Ppsp Township Of Wbsedcl,Bagmundi Purulia From Bagmundi W/S Scheme P.H.E. Dte.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Aug 2026
8 days left
EMD
42500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Purulia → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Delivery And Installation Of Pumping Machineries And Other Electromechanical Accessories For Drinking Water Supply 60M3 Per Day At Ppsp Township Of Wbsedcl,Bagmundi Purulia From Bagmundi W/S Scheme P.H.E. Dte.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, delivery of clear water Open well Submersible Pump (IS 14220) for potable clear water and suitable for operation in AC Three phases 415V,50Hz.Suction and Delivery size 65/50 mm or 65/65 mm. ( MAKE- As per PHE APPROVED VENDOR LIST. a) Discharge-33 m3/hr, Total head -30Mtr |
| 2 | Supply & delivery at site following Valves:- Supply & delivery & storage at site CIDF single door swing check NRV (P.N.–1.0) rating as per IS:5312 Part – I, and as per technical Specifications.(for individual L/L Pump) i) DN 80 mm (for H/L individiual delivery header) |
| 3 | CIDF non-rising Sluice Valve (P.N-1.0) generally conforming to IS 14846 as per technical Specification. i) DN – 100mm (for H/L Common delivery header and wash out line) |
| 4 | Supply and delivery of three phase actuator operated wafer type butterfly valve (PN-1.0) as per Bs-5155 and as per technical Specification. i) DN 80 mm (for H/L individual delivery header) |
| 5 | Supply, delivery & storage and installation at site M.S. fabricated dismantling joints (P.N–1.0) with rubber compression ring and adjustable follower flanged complete assembley with galvinised stud and nuts, as per technical Specifications. i) DN:80mm |
| 6 | ii)DN:100 mm |
| 7 | Supply, delivery & storage at site M,S Pipes for individual pump delivery line from pump discharge upto common delivery header, M.S flanges, bends, specials, etc. as required to make the installation of delivery and common delivery header of pumping machineries complete in all respects up to the satisfaction of E.I.C.and as per technical Specifications given in NIT. All M.S pipe and pipe specials are heavy type. i) M.S ERW pipe 80 mm dia 4.85 mm thick as per IS-1239 (Part-I & II) (3 mtr each) (7 nos) |
| 8 | M.S ERW pipe 80 mm dia 4.85 mm thick as per IS-1239 (Part-I & II) (1.5 mtr each) (2 nos) |
| 9 | M.S 90 degree long radius bend 80 mm dia (2 no) |
| 10 | M.S Slipon flange 80 mm dia 14 mm thick |
| 11 | M.S Concentric Reducer 65 x 80 mm (2 no) |
| 12 | M.S ERW pipe 100 mm dia 5.4 mm thick (Medium B Class) as per IS-1239 (Part-I & II) (3 x 5 =15 mtr) |
| 13 | M.S Slipon flange 100 mm dia 16 mm thick(8 nos) |
| 14 | M.S 90 degree long bend 100 mm dia ERW P/E (2 no) |
| 15 | Supply delivery and storage at site of Electromagnetic Flow Meter with remote display and having minimum 20 mtr cable length between the meter and indicator as per technical specification. i) DN: 100 (for H/L Common Header header) |
| 16 | Supply, delivery & storage of bourdon type pressure gauge, with 3 way brass cock, syphone and other necessary special as necessary. i) (0 – 7 Kg.) 102 mm dia for individiual delivery header (Make-H-guru) |
| 17 | Supply ,delivery and storage at the site of DI Tamper Proof kinetic Air Release Valve with ISV(DI) IS-14845:2000 of DN 80 PN-1.0 rating with isolating valve as per relevant IS Standard and as per technical specification of NIT.Make- phe approved vendor list. |
| 18 | Supply delivery and storage at site of Radar type continuous level measuring unit with provision of 4 to 20 mA analogue signal, indicator and recorder for continuous level monitorin unit as per technical Specifications. (Make – as per approved unified vendor list vide official website of WBPHED) |
| 19 | Supply , delivery and storage at site of UPS 145 -290 V AC , 45-65 Hz , 1100 VA , output 230 V , 50 Hz (Battery 12V, 7.2 Ah x2) for 4-6 hrs power backup within a sheet metal enclosure and installation on wall by any suitable long lasting arrangement including electrical connection as per direction Make- APC / PHE Approved make |
| 20 | Supply, Delivery and Storage at Site 2 mm. thick CRCA Sheet Steel Enclosed Cubical type wall/ Floor Mounted 415 Volt MCC PLC based Panel having required Feeders as per technical Specifications . |
| 21 | Supply delivery and fitting fixing of 100 A, 415 V Kit-kat rewirable type fuse (Porcelain fuse carrier & base) on wooden board. (Make-As per PHED Approved make) |
| 22 | Supply, delivery and storage at site TPN main switch 100 Amps 415 Volt TPN re-wireable type Main Switch (Make – as per approved unified vendor list vide official website of WBPHED) |
| 23 | Supply, delivery and storage at site of following L.T cables for installation. Make- PHE approved make i) 25 Sq. mm 3.5 core, 1.1 KV grade, Al. Ar XLPE cable conforming to IS : 7098 (Part – I).From Existing PDB cum MCC to new MCC Panel |
| 24 | ii) 1.5 sq mm , 12 core , 1.1 KV Grade PVC insulated Copper Armoured control cable as per relevent IS.a) For H/L 2nos actuater x 30 mtr= 60 mtr |
| 25 | iii) 2.5 sqmm 3core, 1100 Volt grade copper water proof PVC insulated submersible flat submersible cable,Conforming To IS : 694 As Amended Up To Date.a) from MCC Panel to H/L Motor 30 x 4nos = 120 mtr |
| 26 | Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). withall necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc.fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories,specials.).a) 40 mm dia [ for submersibile Cable protection] |
| 27 | Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. (i) With out angle iron support 100x50x1.25mm Tray (18SWG) |
| 28 | Laying of cable Underground through 40 mm dia PVC Schedule-80 pipe as per direction of EIC. i) 2.5Sq mm Copper Cable for H/L Pump |
| 29 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. |
| 30 | Laying of two cables 1.5 sqmm 12 core in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed. |
| 31 | Laying of 1.5 sqmm 12 core cable on existing Cable Tray and binding with suitable size GI wire. |
| 32 | Earthing protection for Pump House, electrical installation as per ISS and IE rules and as per technical Specifications given in NIT.Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground with 25 x 6 mm strip.( Earth pit for each intallation) i) For Instrumentation (2nos) ii) For MCC panel (2 nos) |
| 33 | Wiring with 1.1 KV grade single core PVC insulated stranded Copper wire in GI conduit and painting. A) 2x2.5 sqmm wire in 19 mm GI conduit incl. S&F1x14 SWG GI ECC |
| 34 | Supply and fitting fixing of 16 A SS combined with Box. Make- PHED Approved make. |
| 35 | Installation and commissioning of all supplied items mentioned as in above(Item No.-1 to 12 except item no.-11 ) including supply of all required items, as required for installation of & Open Well pumping machineries, all valves, delivery pipe line, MCC panel supplying all necessary items i.e- nut & bolt wather rubber gasket, jointing of cables termination cable soketing by suitable rated sockets, jointing the delivery header with H/L rising main, and paining anticorrosive paint etc. including cost of gas cutting, welding etc. as required for complete the installation as per Hydraulic standard & IE rules in compliance by engaging skilled technician all complete as per Technical specification and upto entire satisfaction of EIC. |
| 36 | Add GST @ 18% |
| 37 | Add CESS @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender