Tender For Construction Of Reinforced Cement Concrete Bunkers (04 Nos.) At District Jail Poonch ( C. No.03-A)
Tender Value
1.20 Crore
Estimated cost
Bid Submission
25 Jul 2026
4 days left
EMD
2.41 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Reinforced Cement Concrete Bunkers (04 Nos.) At District Jail Poonch ( C. No.03-A)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 2 | Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : All kinds of soil : |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve |
| 6 | All works upto plinth level |
| 7 | All works above plinth level upto floor V level |
| 8 | Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately. Providing M-35 grade concrete instead of M-25 grade BMC/RMC. |
| 9 | Add or deduct for using more or less cement in the items of design mix over and above the specified cement content therein. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 11 | Foundations, footings, bases for columns |
| 12 | Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc. |
| 13 | Suspended floors, roofs, landings, balconies and access platforms. |
| 14 | Stairs (excluding landings) except spiral staircases. |
| 15 | Above 20 cm wide |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 17 | 15mm cement plater whereever required of mix 1:6 (1 cement 6 coarse sand) |
| 18 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments |
| 19 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 20 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown |
| 21 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 22 | Carriage of material by mechanical means and head load |
| 23 | Carriage of sand 11 km by mech means |
| 24 | carriage of stone aggregate 11km by mech. Means |
| 25 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 26 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid |
| 27 | long nose bib cock |
| 28 | short body bib cock |
| 29 | angle valve |
| 30 | PVC connection |
| 31 | soap case |
| 32 | towel rod |
| 33 | washbasin with pedestral complete Job |
| 34 | SS sink (2'0x1'6\\") |
| 35 | CP grating |
| 36 | waste pipe |
| 37 | coupling |
| 38 | PVC pipe4\\" |
| 39 | PVC plain bend 4\\" |
| 40 | PVC plain tee 4\\" |
| 41 | GI pipe 25mm with fitting |
| 42 | PVC water tank |
| 43 | pillar cock |
| 44 | flat back or wall corner type urinal basin….. |
| 45 | PVC floor trap 4\\" |
| 46 | CP nipple 1\\" and 0.5\\" |
| 47 | CP ball valve 25mm |
| 48 | Pianting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work |
| 49 | Wiring for light/fan point with 1.5 sqm mm FRPVC insulated copper in surface/recessed medium class PVC conduit with suitable G.I Box modular type switch complete |
| 50 | Wiring for circuit/submain wiring of FRPVC insulated copper conductor cable |
| 51 | 2x2.5 sqmm |
| 52 | 2x4.0 sq mm |
| 53 | Providing and fixing modular dumiees switched……Complete job |
| 54 | Providing and fixing ceiling rose……complete job |
| 55 | Providing and fixing of following modular type switch/socket combined of make anchor roma or equivalent |
| 56 | 5/6 A |
| 57 | 15/16 A |
| 58 | Providing and Fixing following mCB's distribution boxes double door heavy duty (12 way) |
| 59 | Providing and Fixing of following type MCB's/switch gear of L&T,heavells,Anchor or equivalent make (6A to 32 A) |
| 60 | Providing and fixing wall fan of Crompton,orient or equivalent make with allied accessories complete job |
| 61 | Providing and fixing modular angle/straight holders |
| 62 | Providing and fixing LED lamp of orient,crompton or equivalent make 9 watt |
| 63 | Providing and Fixing of following type MCB's/switch gear of L&T,heavells,Anchor or equivalent make 63A=SPN |
| 64 | Providing and fixing of 25 mm size of med class PVC comduit along with accessories in surface/recessed…..Complete job including cutting the wall |
| 65 | Providing and fixing of following sizes of 2 core aluminium cable (2x16 sqmm cable) |
| 66 | Disposal of suplus excavated earth outside the jail premises and outside municipal limits of city at some safe places….complete job quantityV.L No. 1 @60% |
| 67 | Hiring architect and structural consultant for providing architectural drawing and vetted structural drawings of RCC bunkers(06 copies in A3 size of all drawings)before start of work after allotment of contract Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender