Housing Urban and Rular Development Government Departments Closing in 4 days TDR #56484542

Tender For Renovation Of Chattipadshahi Gurudwara At Rainawari.(Adv. Cost Rs. 63.00 Lacs) (Incl Cost Of Material+Gst)

Issued by Government Departments · Srinagar, Jammu and Kashmir
Tender Value
63 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
4 days left
EMD
1.26 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation Of Chattipadshahi Gurudwara At Rainawari.(Adv. Cost Rs. 63.00 Lacs) (Incl Cost Of Material+Gst)

BOQ

Name of Work:- Renovation of Chattipadshahi Gurudwara at Rainawari.(Adv. Cost Rs. 63.00 Lacs) (incl Cost of material+GST)
Sl. No. Item Description
1REMOULDING OF GATES
2Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead.
3Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50
4Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: IN CEMENT
5Dismantling Marble flooring laid in cement mortar including stacking of serviceable material and disposal ofunserviceable material within 50 meters lead.
6Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design
7Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: with lead as per EIC
8Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m
9P/L stone soling incld. hand packing all carriages complete job.
10Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:(1:4:8 using 40mm aggregate.)
11Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
12Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns
13Centering and shuttering including strutting, propping etc. and removal of form for.Arches, domes, vaults upto 6 mspan
14Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level
15R/F for RCC work incld. cutting,bending,straigthening,cutting, carriage and placing in position T.M.T
16Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with M20 Grade (1:1.5:3 using 20mm aggregate.)
17Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed
18Extra for fine chisel dressed Devri Stone in square or rectangular Pillars
19Extra for arch masonry with devri stone curved on plan for a mean radius not exceeding 6 m.
20Devri Stone of size as per site requirement in steps with moulded nosingwith 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed
21Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
22R/F for RCC work incld. cutting,bending,straigthening,cutting and placing in position T.M.T bars
23Stone work in plain ashier in cornices 100mm.in cement mortar 1:6(1 cement :6 coarse sand)including pointing with cemen mortar 1 :2 (1white Cement:2 stone dust)with an add mixture of pigment matching the stone shade (Devri stones fine chisled and including extra labour for rectangular pillars and arch portion and incld. all carriages upto site of work
24Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and
25Providing 65x6 mm angle iron hold fast cm long including fixing to frame with bolts, nuts and plugs and embeddings in cement concrete block 30x10x15 cm 1:1:5:3 mix ( 1 cement : 1.5 coarse sand : 3 gradedstone aggregate 20 mm nominal size).
26Painting with Synthetic Enamel Paint of approved brand
27Providing and fixing ornamental 1feet finial on top of Gurudwara dome made of polished brass sheet including fabrication polishing incuding scaffolding at struck complete as per drawing and direction of engineer in charge.
28Providing and fixing ornamental 2 feet finial on top of Gurudwara dome made of polished brass sheet including fabrication polishing incuding scaffolding at struck complete as per drawing and direction of engineer in charge.
29Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick
3015mm thick cement plaster on the rough side of single or half brick walls of mix 1:6 ( 1 cement :6 fine sand)
31Providing and applying 2-component high-performance Aliphatic Polyurethane (PU) paint of approved brand and manufacture (such as MRF Metalcoat, Asian Paints Emporio, or equivalent) in Golden Metallic shade on steel or plastered surface to give an even shade and high gloss finish. The work includes thorough cleaning of surface to remove dust, oil, grease and rust; application of one coat of compatible 2-pack Epoxy Primer; and application of two coats of 2-pack PU Golden Metallic paint, including protection of surrounding areas and scaffolding up to 3.5m height, complete as per manufacturer's specifications and direction of Engineer-in-Charge
32Carraige upto 15km by MTSand
33Stone aggregate
34TILE WORK
35Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan)
36Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.
37Demolishing cement concrete manually/by mechanical means including disposal of material... (1:4:8 or leaner)
38Labour Part for processing demolished cement concrete into recycled concrete aggregate (RCA) as soling.
39Carriage for Demolished Rubbish within 15km meters by Mechanical Transport
40Supplying and laying Dry stone/recycled concrete aggregate (RCA) soling dully hand packed tightly…
41P/L in position cement concrete of specified grade excl. centering: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone)
42Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
43Providing and laying factory made cement PAVEX Cobble Stone Paver Block (8\\"x8\\") in footpaths parks lawns driveways or parking etc of required strength thickness and side shape made by table vibratory method using PU mould laid in required colour and pattern laid on 20 mm thick base of cement motor 1:4 mortar in all shapes and patterns including grouting the joints with white cement as per required size and pattern finishing completas per direction of engineer in charge: 60mm thick cement concrete block of M35 grade with approved colour design and pattern as per EIC.
4415mm thick cement plaster on the rough side of single or half brick walls of mix 1:4
45Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under...
46Devri Stone Tile 25mm thick work for wall lining over to 30 to 40 mm thick bed...
47CARRIAGESAND
48AGGREGATE
49Toilet Block
50Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area 40 sqcm. and above.
51Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet
52Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:
53Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:4:8 or leaner mix (i/c equivalent design mix)
54Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 min width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
55Supplying and laying Dry stone soling dully hand packed tightly , watering and with all carriages up to the site of work.
56Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to all level (1:4:8 (1 Cement: corse sand: 8 grade stone aggregate 40mm nominal size) crushed including all carriages up to the site of work
57Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to all levels (1:2:4 ( fine sand: 4 grade stone aggregate 20mm nominal size). Crushed including all carriages up to the site of work
58Centering and shuttering including strutting propping etc. and removal of form work in foundation footings basis of columns
59Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m
60Brick work with F.P.S bricks in class designation 75 in superstructure up to all floors in cement mortar 1 cement 6 fine sand mortar including cost of scaffolding and carraige of material up to the site of work. Including Extra
61Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size).
62Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast ligs or with dash fasteners of required dia and length (hold fast lngs or with dash fasteners shall be paid for separately) Second class kail wood
63Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
64Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
65Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms
6615mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1 : 3 ( 1 cement : 3 fine sand)
67Providing and fixing ISi markedflush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws. Foreign wood
68Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class kail wood
69Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood/Foreign
70Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
71Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
72Providing and Fixing of the following Hardware fittings:Tower Bolts 100x10mm
73Tower Bolts 200x10 mm
74Oxidized MS Handles 125 mm
75oxidized M.S. handles 100mm
76Aldrop as directed by EiC
77Mirror of superior glass (of with 6 mm thick hard board backing. Rectangular shape 453x357 mm
78Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate.
7912mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) on rough side of single or half brick wall including cost of scaffolding and carriage of materials;
80Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :(thickness to be specified by the manufacturer), of approved make, in all colour, shades
81Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
82Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to 1.5. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 500x500 mm
83Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied@ 3.84 kg/10sqm)
84Supplying and Fixing square shape 450x450 mm precast R.C.C. manhole cover withframe - L.D. - 25 set in cement mortar 1:4 including all handling and fixing charges.
85Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISi: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
86Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work-exposed on wall with clamps at 1.00 meter spacing . PN-16 pipe, 25mm OD(SDR-7.4)
87Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work-exposed on wall with clamps at 1.00 meter spacing 19.2.1.4 PN-16 pipe, 32mm OD(SDR-7.4)
88Providing and fixing PPR Unions. PPR Union 25mm
89Providing and fixing PPR Unions . PPR Union 32mm
90Providing and fixing PVC (Prince/Finolex/Jlndal make) PVC pipe (Type B) in proper gradient in excavated trenches for soil/ wastewater including necessary jointings,fittings such as ,cowl,bends,d-bends,traps,dia cliff,tees,junctions.clamps,solvent,cement etc. complete as per direction of EiC: 110 mm
91Providing and fixing PVC (Prince/Finolex/Jlndal make) PVC pipe (Type B) in proper gradient in excavated trenches for soil/ wastewater including necessary jointings,fittings such as ,vent,cowl,bends,d-bends,traps,dia cliff,tees,junctions.clamps,solvent,cement etc. complete as per direction of EiC: 75mm
92Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.
93Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
94Providing and fixing water closet squatting pan {Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 liter low level white P.V.C. flushing cistern, including flush pipe {of approved make) with manually controlled device {handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
95Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device {handle lever), conforming to 15:7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required: W.C. pan with ISi marked white solid plastic seat and lid.
96Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings andbrackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.
97Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
98P/Fixing Ball Valve(Brass) of approved quality High and Low Pressure with plastic Floats 15mm Bore
99P/Fixing 15mm nominal bore CP Brass angle valve for basin mixer and geyser points of approved aualitv confirmim::i to 15:8931
100Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and auality as per direction of Engineer-in charge.
101Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS: 8931
102P/Fixing hand shower(Health Faucet) with 6mm dia,1m long PVC tube and wall hook all complete.iaauar /eauivalent
103Providing and Fixing thermo heated water storage geyser of approved brand havels or eauivalent including all necessary fitting 50 Litres :Horizontal
104Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
105Supplying and fixing the following sizes of Rigid PVC Conduits 1.8mm thick complete with accessories such as bends,junction boxes,pull boxes etc.
106Lighting Boxes (Deep)
107P/f LED Surface lights 12W i/c wiring,modular switch,plate.box all complete job.
108Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 {1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm {inside) with hinged cover fixed PVC Heavy duty Manhole Cover including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay {non modular) bricks of class designation 7.6
109CARRIAGE 15 km avg lead SAND
110AGGREGATE 15 km avg lead
111BRICK carriage 20 km avg lead Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56484542
AUTHORITY Government Departments
TENDER VALUE 63 Lakhs
LAST DATE 28-07-2026
Authority
Authority Name Public Works Department
Work Description Tender for Renovation Of Chattipadshahi Gurudwara At Rainawari.(Adv. Cost Rs. 63.00 Lacs) (Incl Cost Of Material+Gst)
Basic Detail
Tender No 22 of RNB//Sgr-Core/2026-27
Bidding Type Tender
Location
City Srinagar
State Jammu and Kashmir
Key Dates
Publish Date 15 Jul 2026
Submission Date 28 Jul 2026
Open Date 29 Jul 2026
Finance
Tender Value 63 Lakhs
Tender Fee 1600
EMD 1.26 Lakhs
Exemption Not Available
Document List
15cbb5c0-2f5e-48b3-b0ed-ad745c9a2634.html
BOQ_1029871.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 15, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Jul 29, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

15cbb5c0-2f5e-48b3-b0ed-ad745c9a2634.html

xls

BOQ_1029871.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders