Tender For Stage Contract For R&B Sub Division Zainapora.
Tender Value
27 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
0 days left
EMD
54000
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shopian → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Stage Contract For R&B Sub Division Zainapora.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jul-2026 | Date Extension | Date | 31-Jul-2026 |
| 2 | 25-Jul-2026 | ADDENDUM | Other | 31-Jul-2026 |
| 3 | 25-Jul-2026 | ADDENDUM | Other | 28-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
| 2 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in ,trenches,foundation etc. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mate |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe-500D or more. Reinforcement @ for all rcc work |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 13 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level incl all carriages |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):imported kail wood |
| 15 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick, Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 14587 1st class kailwood |
| 16 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineerin-charge :First class kail wood 35mm thick |
| 17 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. |
| 18 | Providing and fixing4mm thick glass panels including beadings, complete job |
| 19 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) Outer walls, Inner walls |
| 20 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 21 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 22 | Providing and laying vitrified floor tiles Anti-skid in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 23 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, inskirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 25 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm. |
| 26 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 27 | Applying priming coat with ready mixed Pink or grey primer of approved brand and manufacture on WOOD work (hard or soft wood) |
| 28 | Painting with synthetic enamel paint of app. Brand & manufacture to give an even shade 2 or more coats on wood work |
| 29 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm |
| 30 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Washbasin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 31 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 32 | Providing and fixing P.V.C. P & S Trap for water closet or wash basin including P.V.C waste fittings complete: |
| 33 | P/F of soil, waste & vent pipes S&S Pipes Type-B |
| 34 | Providing and placing on terrace (at all floor levels) polyethylene wate storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Triple layer) |
| 35 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 16mm OD(SDR-7.4) |
| 36 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 20mm OD(SDR-7.4) |
| 37 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 25mm OD(SDR-7.4) |
| 38 | Providing and fixing of CP Fitings of Jaguqar, Cera or equivalent |
| 39 | Bib Cock |
| 40 | Angle Value |
| 41 | Ball Value |
| 42 | P/F of Geysers 50-Litre 2000-Watt Storage Water Heater (White) incl. all fittings and fixtures make: venus, jacquar , racold or equivalent. |
| 43 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 44 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 45 | Providing ridges of hips of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks bolts & nuts 8mm dia GI limpet & bitumen washers complete 0.50mm thick with zinc coating not less than 275g/sqm |
| 46 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: n cement mortar |
| 47 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 48 | Felling of trees of girth (measured at a height of 1 M above ground level) including cutting of ttrunck and branches, removing of roots and staking of serviceable material and disposal of unservicaable material. |
| 49 | Beyond 30 CM girth including 60 CM girth. |
| 50 | Beyond 60 CM girth including 120 CM girth. |
| 51 | Beyond 120 CM girth including 240 CM girth. |
| 52 | Providing and Laying of GSB including sorting, spreading in uniform layers i/c watering laying & compaction with PRR of 8-10 tonne complete all carriage |
| 53 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 500 m and lift upto 1.5 m |
| 54 | P/L of WBM GII with sp. Stone aggregate of 63-45 mm size incl. stone screenings of size 13.20 mm and binding material (dust/morum) incl. stacking, sorting, spreading to template, watering and consolidation with PRR of 08-10 Topn capacity incl. cost and carriages of all materials/ equipments with loading and unloading all complete. |
| 55 | Providing and laying of wet mix macadam on prepared sub grade with crushed quarry stone aggrigates of specified grading including mixing of crushed material with pre determined optimum water content in accordance with specifications to form dense mass which is laid by paverand rolled with vibratory Roller 8-10 Ton rolling should be continious till 98% density is achieved to required lines, grades and cross sections i/c cost and carriage of all materials involved & Octroi, Toll texes, Testing charges etc complete (The mix is to be prepared mechanically mixing plant of suitable capacity) |
| 56 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: all kinds of soils |
| 57 | Making Knitted wire crates of approved mesh size i/weaving , binding sides and partations , and binding top after filling i/c cost of filling , stones and weaving material i/c all costs and carriages and cost of wirecrates (using Nallah Stone) |
| 58 | Back filling with Nallah boulders hand packed nominal size i/c compaction with PRR 8-10 Ton capacity i/c all carriages complete |
| 59 | Demolishing R.C.C work manually/by mechanical means including stacking of steelbars and disposal of unservicable material withen 50mtr lead 1:4:8leaner mix |
| 60 | Providing & Laying of RCC spun pipes of required dia i/c Providing of cushion over pipes incld all carriages and loading and unloading of pipes complete. |
| 61 | 900mm dia |
| 62 | 600 mm dia |
| 63 | 450mm dia |
| 64 | 300mm dia |
| 65 | Providing weep holes in reinforced concrete jabutments,wingwalls/returnwalls with 100mm d dia 'AC pipes extending through the full width of the istructure with slope IV:20H towards face complete. |
| 66 | Providing and laying of MS pipes of required dia in proper position with proper cushion i/c trench excavation and refilling of excavated material and providing providing proper cushion and carriagecomplete job. ( 250 mm dia) |
| 67 | Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in- charge. |
| 68 | Mandatory/Regulatory sign boards of 900 mm diameter with part as length of3750 mm. |
| 69 | Cautionary/warning sign boards of equilateral triangular shape having each side of 900 mm support length of 3650mm. |
| 70 | Citizen informative board:- P/F of citizen information board as per technical specification drawing and details. |
| 71 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 72 | Providing and fixing aluminum tubular handle bar 32mm outer dia, 3.0mm thick & 2100mm long with SS screw etc. complete as per direction of Engineer-in-charge. Anodized (AC 15)aluminum tubular handle bar |
| 73 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 74 | Hire charges for Supply and installation of water poof shamiyana of Size (20'x30') for VVIP of approved quality including fixing in position at venue,excluding internal/ exterior decorations and high quality interior carpets and removal of same after end of celebration including all carriages etc all as directed by engineer In-Charge complete. |
| 75 | Hire charges for Supply and installation of electric fan and cooler and removal of same after end of celebration including all carriages etc all as directed by engineer In-Charge complete. FAN. |
| 76 | Hire charges for Supply and installation of electric fan and cooler and removal of same after end of celebration including all carriages etc all as directed by engineer In-Charge complete. COOLER. |
| 77 | Hire charges for Supply and installation of internal/ exterior decorations and high quality interior carpets and removal of same after end of celebration including all carriages etc all as directed by engineer In-Charge complete. |
| 78 | Hire charges for Supply and installation of Water Proof tents of size 20'x20' and including internal decoration and removing of same after end of celebration as directed by engineer in charge including all carriages complete |
| 79 | Hire charges for supply and laying of carpet 1.80 mtr wide and 50mtr long Red carpet removing of same after the end of celebration as per the directions of Engineer Incharge incluidng all carriages complete |
| 80 | Hire charges for supply and placing in position high quality dining tablets (4' dia) and one large for VVIP including wrapping with white cloth all carriages involved complete |
| 81 | Hire charges for supply and placing in position high quality dining tablets (rectangular) and one large for VVIP including wrapping with white cloth all carriages involved complete |
| 82 | Hire charges for supply and placing in position high quality chairs including wrapping with white cloth all carriages involved complete. (for Mini Secretariat and main venue) |
| 83 | Repair and restoration of portable water sinks bwo sanitary fixtures (1 No). |
| 84 | Cp nipples |
| 85 | ball valve(GI) |
| 86 | 1/2 inchGI angle |
| 87 | Union |
| 88 | PPR pipes (16mm) |
| 89 | Installation and fixing of 1 No deployable Toilet point |
| 90 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood |
| 91 | Providing and fixing of 18mm ply for deployable toilet point and steps. |
| 92 | Premiun PVC Panelling i/c corner beadings all complete |
| 93 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 literwhite P.V.C automatic flushing cistern. |
| 94 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 95 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 96 | Towel rail |
| 97 | Providing and fixing soil, waste and vent pipes : 75 mm diameter |
| 98 | Supplying high quality tea, black coffee, zafrani kehwa with eggless cookies, cakes ,snacks etc for VVIP Visits if need arises. |
| 99 | Green Tea |
| 100 | Kehwa |
| 101 | Black Coffee |
| 102 | Normal Coffee |
| 103 | Eggless Cookies |
| 104 | Normal Cookies |
| 105 | Eggless pastery Cake |
| 106 | Normal pastery Cake |
| 107 | Dry fruits ( Ajfan Brand) |
| 108 | Pistachios |
| 109 | Cashews |
| 110 | Badaam |
| 111 | Cuttlery |
| 112 | Borosil Glasses with lid |
| 113 | borosil bowls (large size) |
| 114 | Borosil Bowls ( small size) |
| 115 | Hiring charges for Bone China Cups |
| 116 | Hiring charges for quarter plates |
| 117 | Supplying of good qaulity tissue paper holders (i/c tissues) |
| 118 | Supplying of Hand wash (500 ml) |
| 119 | supply of packaged drinking water (1 ltr) |
| 120 | Supplying of good qaulity towels large size |
| 121 | Supplying of good quality towels (medium size) |
| 122 | Hire charges for Supply and installation of water poof shamiyana of Size (20'x30') 1 no. of approved quality including fixing in position at venue, internal decorations and removal of same after end of celebration including all carriages etc all as direted by engineer In-Charge complete |
| 123 | Hire charges for Supply and installation of Water Proof tents of size 120'x12' (2 No.) and including internal decoration and removing of same after end of celebration as directed by engineer in charge including all carriages complete (For Spectators) |
| 124 | Fixing of dice with decorated roof, ceiling, post, necessary stairs, furnishing of size 20'x16' including all carriages as directed by engineer in charge |
| 125 | Carriage of stage structure from Divisional store to venue and return of the same to Divisional office after completion of the event |
| 126 | Hire charges for supply and laying of carpet 1.22 mtr wide and removing of same after the end of celebration as per the directions of Engineer Incharge incluidng all carriages complete |
| 127 | Hire charges for supply and laying of carpet 20'x20' and canopy 20'x20'/wall to wall at performing venue and removing of same after the end of celebration incluidng all carriages complete |
| 128 | Hire charges for supply and placing in position Plastic chairs including all carriages involved complete |
| 129 | Hire charges for supply and placing in position of Sofas (three Seater) with table and white cloth i/c all carriages |
| 130 | Hire charges for supply and placing in position foam/wooden chairs includling all carriages involved complete |
| 131 | Supply and Laying of lime as per the directions of Engineer incharge |
| 132 | Hiring and fixing of Nylon Rope at venue as per the directions of Engineer incharge |
| 133 | Providing and fixing of baloons of different colors as per the requirements |
| 134 | Supplying of Broom Sticks (Jadoo) as per the requirements |
| 135 | Providing and applying of stone dust/Sand as required and directed by Engineer incharge |
| 136 | Providing and fixing of printed flex sheet of approved size depicting in coloured with text and images as directed by Engineer incharge |
| 137 | Engagement of JCB for removing of Vegetation and debris etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 31, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Today
Jul 31, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Today
Jul 28, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender