Tender For Repair Of Old Durga Mandir Bhagawaan Gopinathji Ashram Complex At Kharyar Habba Kadal.(Adv. Cost Rs. 107.08 Lacs) (Incl Cost Of Material+Gst)
Tender Value
1.07 Crore
Estimated cost
Bid Submission
28 Jul 2026
4 days left
EMD
2.14 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Old Durga Mandir Bhagawaan Gopinathji Ashram Complex At Kharyar Habba Kadal.(Adv. Cost Rs. 107.08 Lacs) (Incl Cost Of Material+Gst)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Jul-2026 | Technical Cum Extension of Date | Date | 30-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | TEMPLE |
| 2 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. 15.23.1 For thickness of tiles 10 mm to 25 mm |
| 5 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50mm thk |
| 6 | P/F DEVRI PATH TILES 40MM THICK LAID OVER 20MM CEMENT MORTAR IN 1:4 MIX I/C POINTING WITH GREY CEMENT ALL COMPLETE JOB |
| 7 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ( 600X600), including grouting the Joints Epoxy |
| 8 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. |
| 9 | WALL PAINTING WITH EXCEL EMULSION / INTERIOR EMULSION PAINT ( WATER SOLUBLE EMULSION) ON EXTERIOR/ INTERIOR SURFACE IN 1 OR MORE COATS I/C PRIMING COAT UNDERNEATH & SCAFFOLDING INVOLVED IF ANY ( Bamboo up to level 5) ALL COMPLETED |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work I/C SCAFFOLDING ( BAMBOO SCAFOLDING UP TO LEVEL 5 ) |
| 11 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete FIR /BUDLOOWOOD |
| 12 | Providing and fixing 25 mm thick shutters for cupboard etc, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws: Panelled or paneled and glazed shutters:9.17.1.2 First class deodar wood |
| 13 | P/F 12MM MR GRADE PLY I/C IMPORTED WOODEN JIOSTS 2\\"X1.5\\" IN CEILING I/C COST OF NAILS, ALL COMPLETE |
| 14 | Providing and fixing plain panelling with skirting chair rails, and cornice with necessary screws, priming coat on unexposed surface etc., complete. 8.27.2.1 12 mm thick |
| 15 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2MM |
| 16 | SUPPLY, FIXING AND MAKING WOODEN ALMIRAH 12-24\\" DEEP OUT OF DEODAR WOOD 19MM THICK I/C 30 X 60 MM WOODEN RAILS IF NECESSARY I/C COST OF NAIL , ADHESIVE, ALL COMPLETE JOB . |
| 17 | EXTRA FOR WOOD CARVING BY HAND ON DEODAR WOODEN PANELS |
| 18 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : 15.28.1 G.S. Sheet |
| 19 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 20 | Providing and fixing precoated galvanized HI RIB PROFILE SHEETS 0.50MM THICK . The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 21 | Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-in |
| 22 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 12.24.1 Ridges plain/ VALLEYS (500 - 600mm) |
| 23 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 24 | centring and shuttering i/c propping and removal of same in Suspended floors, roofs, landings, balconies and access platforms. |
| 25 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 26 | Painting with duco metal coat auto paint on surface i/c sanding, filling with duco putty filler and applying with gun sprayer all complete job ( 2 COATS SURFACER + 2 COATS TOP COAT ) COLOUR AS PER TEMPLE AUTHORITIES |
| 27 | Melamine MATT polishing on wood work (one or more coats) I/C SANDING WITH SAND PAPER 120 TO 320 NO , SEALER 2 COAT, 2 TOP COATS WITH SPRAY GUN APPLICATION |
| 28 | Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work |
| 29 | ENGAGING SKILLED CARPENTER FOR REPAIRING OF PLAIN ROOFING B.W.O OF APPLYING NAILS TO MAKE ROOFING SURFACE EVEN IN LEVEL |
| 30 | PROVIDING AND FIXING CAST IRON RAILING DECORATIVE TYPE HT= 3' I/C FIXING ALL COMPLETE JOB PATTERN AND DESIGN AS PER DIRECTIONS BY EIC I/C CARRIAGES ALL COMPLETE JOB |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 32 | WALL CLADDING TILE : 18 MM THICK BRICK TILE CLADDING ( 75X230X18) FIXED OVER CEMENT MORTAR IN 1:4 MIX WITH 12MM GROOVE AND FILLED WITH GROUT OF COLOUR AS PER EIC IN WHITE CEMENT & GREY CEMENT I/C CLEANING THE SURFACE WITH DILUTED ACID ALL COMPLETE JOB ( PIONEER/JINDAL BRICK) CLADDING I/C SCAFOLDING |
| 33 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately.12.71.3 Chaar Phool |
| 34 | DEVRI STONE WORK Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed |
| 35 | Extra for fine chisel dressed Devri Stone in square or rectangular Pillars |
| 36 | P/F DEVRI STONE CORNICE 75MM ROUNDED/CHAMFERED |
| 37 | P/F DEVRI STONE PILLAR CAPS 30\\" X 21\\" ON CEMENT MORTAR 1:4 |
| 38 | Providing and laying rough chisel dressed Devri Stone in kerbs, of size 200x200 mm face with chamfer in cement mortar 1: 6 (1 cement : 6 coarse sand) including curing. |
| 39 | Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge. |
| 40 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws., First class DEO wood 35MM THICK |
| 41 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels 8.2.1.2 (Area of slab over 0.5 sqm) 16MM |
| 42 | SUPPLY, MANUFACTURING AND FIXING BWP PLY TO PLY 18MM CARCASE ( CABINETS FOR KITCHEN I/C LINER MICA 0.6MM INSIDE, 1.5MM ACRYLIC MICA OUTSIDE WITH ALL PROFILE HANDLES. INCLUDES MOUDULAR 3D HINGES, SCREWS, MARINE FEVICOL, PVC EDGE BANDING TAPE ( 1MM) SUPERIOR QUALITY (SURFACE MEASUREMENT TO BE TAKEN FOR PAYMENT) . ( 350- 600 MM DEEP) |
| 43 | P/F 18MM THICK PLY TO PLY MR GRADE PLY WOOD FIXED WITH DRY WALL SCREWS ALL COMPLETE JOB |
| 44 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead :15.39.2 Thickness above 10 mm upto 25 mm |
| 45 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. WELDED |
| 46 | SUPPY, INSTALLTION , TESTING AND COMMISIONING OUTDOOR LED BOLLARD, SUPERIOR QUALITY , LED INBUILT FIXED I/C WIRING , CIRCUIT, SWITCH , MCB ALL COMPLETE JOB |
| 47 | Carriage of material/Disposal by mechanical transport for a lead of 15 km from source to site |
| 48 | AGGREGATE BELOW 40MM |
| 49 | CEMENT |
| 50 | STEEL/CGI |
| 51 | Timber + PANELLING+PLY |
| 52 | DISPOSAL OF MULBA, DEBRIS, DIMSNTLED UNSERVICABLE MATERIAL I/C HEAD LEAD OF 100 FT BY ENGAGING M.T BEYOND MUNCIPAL LIMITS FOR LEAD UP TO 12KM |
| 53 | Carriage of material by Manual Labour for average lead of 150mtrs |
| 54 | Stone Aggregate below 40mm |
| 55 | Steel/CGI Sheets |
| 56 | TIMBER |
| 57 | CEMENT |
| 58 | TILES |
| 59 | ELECTRICAL ITEMS |
| 60 | Part-A(Internal Electrification) Wiring for Light point/Exhaust/Fan point with (P+N+E) 3x1.5 sq.mm FRLS-H/HFFR PVC insulated Multi strand Copper conductor single core cable (Polycab/Finolex/Anchor/Salzer/Havells/Paraflex Make) surface/recessed Conduits (including Cost of Conduit) laid in slabs with 01 No.of 6 Amp Modular Switch,Modular Plate,Cover in front & suitable GI box etc ISO/IEC Certified Havells(Crab-Tree)/Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/ABB Anti bacterial Make & shall be approved before execution of work. |
| 61 | Supplying and Fixing of Indicator as required, ISO/IEC Certified Havells(Crab-Tree)/ Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/Equivalent Make & shall be approved before execution of work. |
| 62 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required,ISO/IEC Certified of Havells(Crab-Tree)/Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/ABB Anti bacterial Make. |
| 63 | Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H/HFFR PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Polycab/Finolex/Anchor/Salzer/Havells/Paraflex Make) |
| 64 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required, ISO/IEC Certified Havells(Crab-Tree)/Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/ABB Anti bacterial Make & shall be approved before execution of work. |
| 65 | Wiring for 6Amp Plug(Computer Point) with (P+N+E) 3 x 2.5 sq.mm FRLS-H/HFFR PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Polycab/Finolex/Salzer/Paraflex Make) |
| 66 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including proving and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings), ISO/IEC Certified Havells(Crab-Tree)/Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/ABB Anti bacterial Make & shall be approved before execution of work. |
| 67 | Wiring for Sub main Wiring along with earth Wire with the following Sizes of FRLS-H/HFFR PVC insulated copper conductor, single core Cable in surface/Recessed medium class PVC conduit (Polycab/Anchor/Finolex/Salzer /Havells/Paraflex Make) & shall be approved before execution of work. |
| 68 | 2x10 sq.mm+ 1x6 sq.mm (P+N+E) for Power point Sub main in One run from Main Panel to Distribution Boards. |
| 69 | 2x6 sq.mm+ 1x6 sq.mm (P+N+E) for Lighting/Inverter/Heating Point Sub main in One run from Main Panel to Distribution Boards.(02 Circuit) |
| 70 | 2x2.5 sq.mm+ 1x2.5 sq.mm (P+N+E) for Lighting/Inverter Circuit in One run from switch boards to Distribution Boards. |
| 71 | Supply/Fixing/Testing and Commissioning of 6Amp to 32Amp Rating SP,240v,*C* Curve 10K, Miniature Circuit Breaker suitable for inductive load of following poles in existing MCB . DB Complete with connections.(L&T/Siemens/Legrand/ABB /Schneider/BCH Make) |
| 72 | Supply/Fixing/Testing and Commissioning of Supplying and fixing following rating, double pole,(single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. (L&T/Siemens /Legrand/ABB/Schneider/BCH Make) |
| 73 | 25-32Amp. |
| 74 | 40Amp. |
| 75 | 60Amp. |
| 76 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (L&T/Siemens/Legrand/ ABB /Schneider/BCH Make) 12 way , Double door |
| 77 | Supply/Installation/Testing and Commissioning of IP-65/68 Homogenous LED Strip (Warm Type) Warm light with following Specifications: Input Wattage: 08-10W / Mtr,Input Voltage: 220 - 240VAC,Input Frequency: 50 Hz, Input Current (Max): 50mA, Power Factor:. > 0.95,Surge Protection:2.5KV, High Voltage Protection:300V,HI-POT:1.5KV,IP Rating:IP 65/68,Working Temperature:-10°C to 50°C, LED:Bridgelux,Lumen Maintenance:70% After 50000 BH,Rated CCT: 3000K, 4000K, 6500K,Rated CRI:> 80,System Efficacy:100lm/W,Housing:Silicon Pipe covers the LED Strip Light of Philips/Wioro/Jaguar/Surya/Equivalent Make & Shall be approved not less than by SDO. |
| 78 | Supply/Fixing/Testing and Commissioning of of Adoptor (CV DRIVER LED STRINGS 12 V 2 A IP44-66) of Philips/Wioro/Jaguar/Surya/Equivalent Make & Shall be approved not less than by SDO. |
| 79 | Supply and fixing of 15 Watt LED Powder coated Pressure die cast/Extruded aluminum Body including trim with Aluminum Reflector(System lumen efficacy ≥ 105 < 120 lm/Watt ) Recess/surface mounted (Commercial type) downlighter having following specficafications .The luminaire should have a colour temperature of 6500°K, CRI≥80 and SDCM≤5. Luminaire shall be designed to emit initial system lumen output of greater than 2520 lumens with minimum system efficacy of 140 lumen/watt .The downlighter shall be back-lit & not side-lit. The driver shall have THD≤10% (@full Load) and PF ≥ 0.95 (@full load). The luminaire housing /body should made of pressure die-cast aluminum. The fixture should comply with the parameters as per IS10322. The luminaire shall have impact resistance of IK02 & ingress protection of IP20. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322, \\"FAT\\" before dispatch as per IS 10322 & IK Test. The luminary shall have average life of 50000 hrs operating temperature -10 C to + 45 C The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals: LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab & BIS certificate for LED Luminaire & Driver. The Agency / firm must submit the Technical data sheet (TDS) on OEM letter head along with requisite certificates for approval by an officer from the department not below the rank of SDO ,prior to the supply of materials. The Job includes 2-years replacement warrenty from OEM for the entire lighting fixtures from the the date of sucessful handing over of site to intending department , covering any damage /mulfunctioning /burnt out what so ever reason of Approved Make:Bajaj/Halonix/Surya/Equivalent make. |
| 80 | Supply/Installation/Testing and Commissioning of upto 400mm Shutter Typed,320 Cu.m/Hr.AC 220-240 Volts, 50 Hz Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37dB o including connection etc USHA/Anchor/Polycab/Orient/Halonix/Equivalent Make. |
| 81 | Supply/installation/testing and commissioning of CPRI-approved panel Wall/floor-mounted compartmentalized, 230 volts DP MCCB Main Distribution panels, fabricated out of sheet steel of 16 gauge dust-protected, painted incl earth terminal with all necessary accessories as required for panel with internal wiring of panel.The Panel is to be provided and fitted with the following adjustable-type controlling/protection switchgear devices:1. Normal Incoming:125 Amp DP MCCB with suitable breaking capacity with extended thimbles of Legrand/Siemens/ABB//LK make = 1 No.,100 Amp Bus bar Al Strips(P+N) = 1 Set,Digital Voltmeter =1 No., Digital Ammeter = 1 No., CT coils for Ammeter 300 / 5A = 1 set, phase indicator =1 No.2. Generator/Inverter Incomer:63 Amp Single Phase Automatic Change over Switch of Legrand/Siemens/ABB/Havells/LK make = 1 No.3. AVR Bypass Switch: 100Amp 4-Pole Bypass SwitchOutgoing:(1) 63 Amp DP MCB (10 KA) of Legrand/Siemens/ ABB/Schinder /L&T make = 02 No for normal heating sub main(2) 40 Amp DP MCB (10 KA) of Legrand/Siemens/ ABB/Schinder /L&T make = 02 No for Sub main lighting(3) 32 Amp DP MCB (10 KA) of Legrand/Siemens/ ABB/Schinder /L&T make = 02 No for Sub main invertorThe Panel manufacturing unit should be CPRI Registered and the Contractor has to submit the test certificate of main switch gear and Drawing of panel (Showing claerly dimensions of panel with spacing of switchgear as per IE Standards) is to be approved by Engineer Incharge before manufacturing. |
| 82 | Structural steel work in built up sections & framed work, including cutting,welding,hoisting,fixing in position and applying a priming coat and black paint of approved quality all complete of Straight Arm of 2 Feet Height suitable GI Pipe (A-Class) of 50mm dia with ISI Marked.The job includes S/Fof suitable sizes of Nuts/Bolts. |
| 83 | Supply/Installation/Testing & Commissioning of 15 Watt CORAL LED POST TOP Outdoor Type of Item Code CORALMINIPT15WLED830PSYMTOPC, Suitable for pole dia Ø 50 mm, New generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Opal Cover offers soothing uniform illumination for different applications. The job further includes replacement warranty of fixture (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful Commissioning/Handing over of site to intending department. (Surya/Halonix/Jaquar/Wipro Make.) |
| 84 | Supply/Installation/Testing and Commissioning of Ornamental , wall-mounted type, crafted from cast aluminum with a total height ranging from 440 mm to 550 mm. It shall include a suitable adaptor for secure wall installation, as illustrated in the enclosed drawing or image.The fixture shall feature a combination of cast and spun aluminum components, seamlessly welded and adorned with decorative cast aluminum elements to enhance its aesthetic appeal. It shall be specifically designed to provide adequate illumination for indoor spaces.The luminaire shall be equipped with an extra-clear, transparent, and unbreakable polycarbonate diffuser. It shall conform to relevant IS standards and be fitted with a lamp holder—either screw type or B22—suitable for accommodating an LED bulb rated between 15W and 25W. The fixture shall be finished in antique brown or any other color & Shall be approved not less than SDO. (For Well) |
| 85 | Supply/Installation/Testing & Commissioning of 20-30 Watt LYCUS LED SPIKE LIGHT of Item Code LYCUSSPS9WLED730PSYMBOTG Environmental friendly, new generation, energy saving, decorative IP66 LED spike light using COB LED as light source.(Havells/Philips/Polycab/Halonix Make.) |
| 86 | Supply/Installation/Testing and Commissioning of :1-phase 20 KVA, 50 Hz Oil 1S 335 cooled unbalanced type Digital Automatic Voltage Regulator (AVR) Buck Boost Transformer Copper wound 99.9%,Winding Material Insulation : 99.97% PURE COPPER WOUND FIBER GLASS,(Auto-cum-manual controlled)/Chinar/Electric Field /Alba/AE/Cosco etc ISI/1SO certified with guarantee confirming to ISI standards having an Input Voltage ranging from (90V-260V N-P) Volts and a balanced output Voltage of (230VAC), incorporated with variable transformers with electronic control of high stabilized solid state IC technology as approved and shall be certified. |
| 87 | Supply/Laying/Testing and Commissioning of 2 Core 50 mm sq. Al armored XLPE Insulated,PVC cable Havells/RR-Kabel/KEI/Paramount/Equivalent Make. Including Supply/Laying of HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc of standard make as approved including excavation and refilling the trench were required.The cable shall include end termination lugs with its crimping /taping. |
| 88 | ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER ROD EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value.Supply,Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 20mm Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through suitable DWC High Density Poly ethylene Pipe having Corrugation complete job.(For AVR/MainPanel) |
| 89 | Supply/Installation/Testing and Commissioning of ABC type Fire Extinguisher 4.Kg. Capacity ISI Mark(IS:15683) and dully certified. |
| 90 | Supply/Installation/Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683)suitable for 'B' and 'C' class fires - inflammable liquids, gaseous fires like L.P.G,acetylene and electrical fires. |
| 91 | Supply and Fixing of single pole blanking plates on existing MCB boxes, excluding cost of Boxes. |
| 92 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.Havells/ Legrand/Panasonic/Anchor/Schneider Make |
| 93 | Providing and Laying of shock proof rubber mats of 2mx1mx12mm thick in size of Standard Make. |
| 94 | Supply/Installation/Testing & Commissioning of Hot & Cool Split type 1.5 TON CAPACITY Air Conditioner(AC) 3 Star rating inverter Technology DAIKIN (Foreign brand)/o-General/Blue Star/Hitachi Make with Operating -10°C, 4-way Swing, 05 Year warranty, & additional 05 Year warranty on Compressor Neno Blue fin technology, 5-in covertable ISEER-405 rating R-410A (ECO-Friendly having Split Type wall Mounted & outdoor unite rested on the Factory made Stand on the outer wall including cost of 03 KVA Digital Auto control Voltage Stabilizer for ACs of Approved brand for smooth functioning/constant voltage supply having etc Input Voltage 90-220 volts & Output Voltage 220 volt & stand,Copper piping etc & all other allied accessories.Th job includes 32 Amp AC Box Modukar type etc Complete job. |
| 95 | Providing, laying and fixing of PVC Conduit/Channel 25mm with clips of BCH/Polycab/Anchor Make. |
| 96 | Dismantling of Exiating Wiring and other scraps |
| 97 | Part-B (CCTV) |
| 98 | Supply/Installation/Testing & Commissioning of STQC/BIS-ER Certified 5MP IP Bullet/Dome Camera of Honey Well/Matrix/Pelco/Equivalent Make & Shall be approved not less than SDO.The Job includes CAMC for 2 years. |
| 99 | Supply/Installation/Testing & Commissioning of 8 channel NVR(For 5MP) with 2TB HDD of Honey Well/Matrix/Pelco/Equivalent Make & Shall be approved not less than SDO.The Job includes CAMC for 2 years. |
| 100 | Supply, Installation, Testing and Commissiong of 8 Port POE switch Honey Well/Matrix/Pelco/Equivalent Make & Shall be approved not less than SDO. |
| 101 | Supply/Laying/Testing & Commissioning of UTP CAT 6 23 AWG solid ETL/ ROHS certified. , shielded, outdoor type cable Make: Dlink/Cisco/Polycab/Equivalent Make. |
| 102 | Supply and Laying of 25mm dia PVC Conduit ISI marked along with all accessories like socket, bend, etc complete as required. |
| 103 | Supply & Installation of IP-20 & IK-08, UL Listed Wall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door, Vertical Mounting Rail 1.6 MM with 'U'Marking, with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19\\" angles with wall mounting provision on wall. Accessories like: 1 No of 19\\" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware, 1 No of 19\\" 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required.All as per pre approved by Engineer in charge of D-Link or Equivalent Make Including Supply of power extension cord etc:-9 U Rack with Width 600 mm & Depth 400 mm + 100 mm |
| 104 | Wiring for circuit (raw power)/Sub main wiring in 2-Core 1.5 sq. mm in one run of FRLSH PVC insulated copper conductor, single core cable of Havells/ Polycab/Anchor/Salzer Make. |
| 105 | Supply/Installation/Testing/Commissioning of 55 Inches 4K LED Display Monitor LG/SONY/Samsung/ Equivalent Make & Shall be approved not less than SDO. |
| 106 | Supply/Fixing/Testing & Commissioning of HDMI cable of standard Make. |
| 107 | Supply/Fixing/Testing & Commissioning of PVC Camera Box of standard Make. |
| 108 | Part-C (LED STREET LIGHTING) |
| 109 | Supply, Installation, Testing and Commissioning of 9 Mtr Hot Dipped Octagonal Pole (Type KP0975) of dimensions: Bottom Dia-155mm, Top Dia-70mm, Thickness-3mm, Base Plate-275*275*16mm, Foundation Bolt-04 No. of Dia 20*700mm and including the Supply/Fixing of The Suitable G.I Ring/Square Bracket is selected having space for holding 06 No. of Flood lights for each pole as per site requirement on approval of site Incharge. Also include Supply/Fixing of 8 SWG G.I wire run over the cable length properly earthed with main earthing pit/grid including thumbing on of terminals - gland fixation. Bajaj/Utkarsh/BPP/Surya Make (Complete in all respects) |
| 110 | Providing and laying of M15(1:2:4) Cement Concrete pole block of size ( 2ʹ x 2ʹ x 5ʹ)having 4ʹ U/G & 1ʹ A/G including cost ofform work,Curing,Finishing & Base Mesh Reniforcement having 12mm dia main as well as temperature (spacing 6 inch C/C)The job includes all charges(Complete Job). |
| 111 | Providing & Fixing of IK08 IP-66 protected high power 200 Watt LED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. Integrated potted driver as a unique BIS R number having efficiency more than 85% and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy >=125 Im/wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10% , driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K 355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted of Surya/Crompton/Halonix/ Bajaj/Jaquar Make as approved and to be installed on outside block including S/F of suitable size of Gyser bolt.The job further includes replacement warranty of fixture (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. |
| 112 | Supply/Laying/Excavation/Testing and Commissioning of 2 Core 10 mm sq. Al armored PVC cable Havells/Polycab/LS Make. Including supply/laying of HDPE Pipe of 01 inches dia. The job includes excavation of soil, back filling, ramming and spreading of warning tape at 300mm depth and disposal of excess soil/debris at convenient location. |
| 113 | Supply, Laying, Testing and Commissioning of 2.5x3 core cable and conduting arrangement including Excavation work of Havells/Polycab/Paraflex/Equivalent Make |
| 114 | Supply/installation/testing and commissioning of CPRI-approved panel outdoor panel, 230 volts DP MCB Main Distribution panels, fabricated out of sheet steel of 16 gauge dust-protected, painted incl earth terminal with all necessary accessories as required for panel with internal wiring of panel.The Panel is to be provided and fitted with the following adjustable-type controlling/protection switchgear devices:1. Normal Incoming: 63 Amp DP MCB with suitable breaking capacity with extended thimbles of Legrand/Siemens/ABB//LK make = 1 No.,63 Amp Bus bar Al Strips(P+N) = 1 Set,Digital Voltmeter =1 No., Digital Ammeter = 1 No., CT coils for Ammeter 300 / 5A = 1 set, phase indicator =1 No.Outgoing:(1) 6-10 Amp SP MCB (10 KA) of Legrand/Siemens/ ABB/Schinder /L&T make = 04 No.(2) 40 Amp DP MCB (10 KA) of Legrand/Siemens/ ABB/Schinder /L&T make = 02 No.(3) GIC Digital Timer for Auto On OFF Lights= 01 No.The Panel manufacturing unit should be CPRI Registered and the Contractor has to submit the test certificate of main switch gear and Drawing of panel (Showing claerly dimensions of panel with spacing of switchgear as per IE Standards) is to be approved by Engineer Incharge before manufacturing. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender