Tender For Mechanical, Civil& Electricalcomponents For Rehabilitation Of Sarangkheda Project In Tq. Shahada Dist Nandurabar Of Maharashtra Under Drip-Ii
Tender Value
67.83 Crore
Estimated cost
Bid Submission
13 Aug 2026
29 days left
EMD
33.92 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nandurbar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Mechanical, Civil& Electricalcomponents For Rehabilitation Of Sarangkheda Project In Tq. Shahada Dist Nandurabar Of Maharashtra Under Drip-Ii
BOQ
| Sl. No. | Item Description |
| 1 | Manufacturing Leaf of Vertical Lift Gate Size 15 x 11 M.As per standard drawing / approved drawings & Specifications with relevent IS codes mentioned in drawing. All materials used shall conformed to related IS Codes. It includes all materials, Labour charges, machining and machinery charges,etc. |
| 2 | Providing & applying paint to Vertical Lift Barrage Gate Leaf Size 15 x 11 M. with Primer Red Oxide Paint in two coats and anticorrosive coal tar black paint in two coats including cleaning the surface to the satisfaction of Engineer in charge by sand blasting / scraping removing oil, grease, other foreign materials including all necessary material , labour with all lifts etc. complete.As directed. |
| 3 | Transportation Charges. |
| 4 | Transportation Charges for Stop logs from Sulwade and Prakasha Barrages |
| 5 | Fabrication of Movable M.S. Platform for repairs work of Vertical Lift Gate of size 15m x 11m -6 Nos work including Material charges, fabrication charges etc complete @ Sarangkheda Project |
| 6 | Handling charges of one piece of 15 x 1.3 Mtr and 18.3 x 2 Mtr Stoplog gate for repairs to radial gate considering lowering, lifting & stacking on platform / on storing arrangement. , including cost of material, sundry material and labour charges with leads & lifts at site etc completeas per drawings, specifications and or instructions of concern in charge. |
| 7 | Under Water Inspection Charges using divers upto 25 Mtrdepth. service charges 2 days per gate. |
| 8 | Dismantling of Vertical Lift Gate of size 15m x 11m and existing sill beam by way of lifting & mounting the gate properly on dogging for removal, with the help of cranes, machinaries & labours@ Sarangkheda Project . |
| 9 | Other miscellnous worksDismantling of leaf fromVertical Lift Gate 15x11 m by cutting removing fitted girders and preparing the leaf plate by sand blasting cutting to sizes330mm 350mm 130 mm long strips for strengthing the pylon and bridge structure with the help of cranes, machinaries & labours@ Sarangkheda Project |
| 10 | Material, fabication & erection work of cabin for central drive unit for Vertical gate 15 x 11 mtr.-26 nos , Secuirity Cabin at both Ends-2 nos and Two nos of Cabin for Godown Purpose including Repairs and Maintainance Work of Central Drive Unit Motor at Sarangkheda Barrage Tal.Shahada Dist.Nandurbar |
| 11 | Dismantling of hoist of Sarangkheda Project size 15 x 11 m left side, right side, & central unit & moving towards downstream side to 222 mm or as per actual c.g. of new gate lift & fitting the hoist to new place & alignment of hoist & allied works at Sarangkheda Barrage Tal.Shahada Dist.Nandurbar |
| 12 | Manufacturing, erection and painting of Stair case & Inspection Ladder and extension part of stair case with fabrication of Electrical pannel, providing of Cable tray and dismentalling of Old cable @ Saranklheda Barrage |
| 13 | Repairs and replacement of hoist Break liner , Break coil , rubber bushes & coupling bolt, Limit switchs with labour Charges painting to Goliath crane @ Sarankheda Barrage |
| 14 | Maintanance work of RCB, Gear train, Pedestal, drum axle, trunion pin, locking box, lifting bracket, wire rope, brake drum of Vertical Lift Gate size 15 x 11 M-26 Nos Sarangheda Barrage Tal Shahada Dist. Nandurbar |
| 15 | Name of Work 2:- Repair to Stop log Gates of Prakasha Barrage for further necessary works at Sarangkheda barrage. Item no 1:- Replacing of Rubber seal of size 15 x 1.30 M. by way of removing old Rubber seal broken nuts & bolts, Rubber seal clamping plates Providing & Fitting new Rubber seal, S.S. nuts, bolts & washers |
| 16 | Item No. 2:Painting to all stop log gate leaf |
| 17 | CIVIL WORKName of work :- Repairs to Pitching at dam site, Grouting of Epoxy mortar to strenghtning of Embeded parts of Vertical Lift Gate & other allied works at Sarangkheda Barrage Medium project Tal.Shahada Dist.NandurbarItem No.1 :- Cleaning cutting thorny shrubs bushes, grass as directed with 15m lead and all Lifts etc complete as directed. |
| 18 | Item No.2 :- Cleaning down trees including cutting trunks & branches and stacking the materials with all lift including uprooting and refilling the pit with material etc.complete as directed.(30cm to 60cm girth) |
| 19 | Item No.3 :- Providing and constructing 300 mm thick dry rubble stone pithching with pin geaders at 2 per Sq.m using stones and stone chips from approved sources including cost of all materials,labour, hand packing / wedging stone chips, finishing etc. Complete with lead upto 50 m and all lifts as directed.Available material |
| 20 | Item No.3 :- Providing and constructing 300 mm thick dry rubble stone pithching with pin geaders at 2 per Sq.m using stones and stone chips from approved sources including cost of all materials,labour, hand packing / wedging stone chips, finishing etc. Complete with lead upto 50 m and all lifts as directed.Borrowed material |
| 21 | Item No.4 :- Providing and injecting epoxy grout including structuring of crack in the body of slab girder by sand blasting, fixing inlet tube arrangement including cost of materials, machinery required for the work and labour charges etc. complete. |
| 22 | ELECTRIC WORKProviding, Erecting, Testing & Commissioning Of DG Set, Switchgear Panel, Power Supply cable And Cable Tray, Safety Measures and Centralised Barrage gate control management system Under DRIP-II at sarangkheda Barrage, Tal. shahada, Dist. NandurbarSupplying, erecting, testing and commissioning of diesel generating set with alternator of 125 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 21.4 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 230 Ltr etc. on provided M20 Grade CC Foundation as per specification no. GEN-DG |
| 23 | Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 95 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT |
| 24 | Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no.EA-EP |
| 25 | Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. |
| 26 | Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete |
| 27 | Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
| 28 | Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3 x up to 95 sq. mm. with necessary material as per specification No. CB-JT/HT |
| 29 | Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 500 mm width & 100 mm height comprising all required standard accessories. |
| 30 | Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete. |
| 31 | 200 KVA Trnsformer Maintenance |
| 32 | Supplying, erecting & marking FPMCB 40A to 63A, with rated short- circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 33 | Supplying, erecting & marking TPMCB 40A to 63A, with rated short- circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 34 | Supplying, installation & marking of surge arrestor / surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 100 kA for single phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD |
| 35 | Supplying, installation, testing and commissioning of 220/250 Volts, single phase, 50 Hz Siren of 3.25 km range (Diametrical), horizontal double mounting type of 0.5 HP 6000 RPM on C. C. foundation complete as per specification no. SRN-AS/SM |
| 36 | Providing C.C. foundation (1:2:4) with plastering of size 60 x 60 x 20 cm for Siren motor with nutbolts of required size with 1.2 cm thick hard rubber sheet packing provided in between the foundation and motor base to minimise the jerks and vibration to the slab complete. |
| 37 | Supplying and fixing required quality metal elastic anti vibration rubber mounting pad to siren. |
| 38 | Supplying and erecting ON LOAD four pole automatic transfer switch, 415V, 200A, 50 Hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ATS controller with provision of time delay protection of OV, UV, phase sequence changing, single phasing and event logging, connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6. |
| 39 | BASIC FACILITIES ENHANCEMENTName of work- Construction of Flood Control Room office Building at sarangkheda barrage.Excavation for foundation in earth, soll of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary beck filling, ramming, watering including storing and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 40 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed Metre sand/grit, ramming, watering etc. complete. |
| 41 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping,compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/ Crushed sand VSI Grade finely |
| 42 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural sand/ Crushed sand VSI Grade finely washed etc) |
| 43 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R. C. C. columns as per detailed designs and drawing or as directed ineluding steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant(Pan mixer) etc. complete. with fine aggregate ( Natural Sand/ Cushed Sand VSI Grade finely washed etc) |
| 44 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap / granite /quartzite/ gneiss metal for R. C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 45 | Providing second class Burnt Brick masonry with conventional I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailingout water manually , striking joints onunexposed faces, raking out joints on exposedfaces and watering etc. Complete. |
| 46 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cmincluding watering and compaction etc.complete. |
| 47 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete,(Excluding reinforcement andstructural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 48 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VS1 Grade finely washed etc) |
| 49 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, foolings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, intels pardis, copings, fins, arches etc. as per delalled designs, drawings and schedules. Including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 50 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 51 | Providing second class Burnt Brick masonry with conventional/I.S.type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6mm diameter / 2 hoop iron strips 25 mmX 1.6mm placed at every third course, properly bent and bonded at ends scaffolding,racking out joints and watering etc. complete. |
| 52 | Providing internal cement plaster 12mm thick in a single coat in cement mortar 1:5 without neeru Metrefinish to concrete or brick surfaces, in allpositions including scaffolding and curing etc.complete. |
| 53 | Providing neeru finish to plastered surfaces in 65.00 Squareall positions including scaffolding and curing etc. complete. |
| 54 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 55 | Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling upto half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20mm. thick layers of same mortar added with jute fiber at 1 Kilogram per bag including finishing the surface smooth with cement slurry admixed with approve dater proofing compound. Marking finished surface with false squares of 300mmx300mm. making the junctions at the parapet rounded and tapered top for required height,with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak proofness on Courtfee stamp paper of Rs.500/-including ponding test etc.complete. |
| 56 | Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 Including filling joints withpolymer base filler nosing / moulding the sharpedges wherever necessary, curing, etc.complete. |
| 57 | Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 58 | Providing and fixing M.S.grill door / window 24 Kilogram/One Square Metre of various size as per detailed drawings with out hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc |
| 59 | Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt and handle and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter Including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box |
| 60 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as perdetailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 61 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mrn of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group B/a) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. |
| 62 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown /RBI red/ Ocean Brown 'granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. |
| 63 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on abed of 1:4 cement mortar including cementfloat, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 64 | Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approvedquality on plaster of 1:2 cement mortarinaluding joint filling with white/ colour cementslurry cleaning curing etc. complete. |
| 65 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete. |
| 66 | Providing and fixing European type white glazed earthen ware coupled closet symphonic trap with symphonic low level white glazed 10 litre scistern wih black back liteseat with all necessary pipe connection etc. complete. |
| 67 | Providing and fixing white glazed earthen ware Wash Hand Basin of 55 cm.x40cm.size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain,stop tap and necessary pipe connections including P.V.C.waste pipe and trap upto the outside face of the wall.Making good the damaged surface,testing etc.complete. |
| 68 | Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc. complete. |
| 69 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,out/et overflow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 70 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipe lineif necessary and conveying and stacking thesame in PWD chowky or as directed etc.complete. |
| 71 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipe lineif necessary and conveying and stacking thesame in PWD chowky or as directed etc.complete. |
| 72 | Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, singlejunctions, slotted vent, clamps etc. complete. |
| 73 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. |
| 74 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 75 | Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positionsincluding scaffolding and curing etc. complete. |
| 76 | Providing fine cement finish 1,5 mm thick over green plaster surface including scaffolding curing etc. Complete. |
| 77 | Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm withframe over inspection chamber etc. complete.Heavy duty (160 kg) |
| 78 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 79 | Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 80 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. |
| 81 | Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. |
| 82 | Providing and Fixing mat finish stainless steel (of 302grade) railing with top pipe of 50 mm dia.and vertical pipe of 38 mm dia at 0.60 mc/coras required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc.complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) |
| 83 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting,fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. |
| 84 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24B.W.G.)for roofing without wind tiles including fastening with galvanised iron screw sand bolts, lead and bitumen washers as per drawing etc.complete.(Weight of 5.5 Kilogram/sq.m.). |
| 85 | Providing and erecting chain link fencing 1.6M. height with G.I. chain link of size 50x50mm,8 gauge thick and fixed 75 mm above ground level on vertical M.S.Angles of 40x40x6 mm size,includind excavating pits for foundation and embedded in C.C.block of 1:4:8 mix of size 450x450x670mm.at 1.75 M.c/c with iron bar 16 mm dia as hold fast including welding link with angle frame at 30 cmc/c with nuts and bolts and horizontal M.S.Angles at top and bottom of 25x25x5 mm size and vertical M.S.flat 35x5 mm and 25x5 mm horizontal including cross support of 40x40x6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450x450x670 mm including 3 coats of oil painting etc. complete. |
| 86 | Providing and fixing 50 mm.dia.medium class G.I.pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete. |
| 87 | Add for elctrification |
| 88 | Sr No.02 Name of Work:- Construction of Security cabin and Entrance gate- 02 Nos at Sarangkheda Barrage.Excavation foundation rn earth, soli of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 89 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means |
| 90 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means |
| 91 | Excavation for foundation in Hard rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum, watering, ramming, etc. complete. (Lift upto 1.5m) By Mechanical Means |
| 92 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 93 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc) |
| 94 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface 'if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. Complete. With fine aggregate (Natural sand/ Crushed sand VSI Grade finely washed etc) |
| 95 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. Complete. With fine aggregate (Natural sand/ Crushed sand VSI Grade finely washed etc) |
| 96 | Providesing and laying cast in situ/ Ready Mix cement concrete M-20 of trap / granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 97 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ In plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 98 | Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc.complete. |
| 99 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete,(Excluding reinforcement andstructural steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 100 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/ pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSl Grade finely washed etc) |
| 101 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 102 | Providing second class masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering end scaffolding etc. Complete |
| 103 | Providing Internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 104 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. |
| 105 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. |
| 106 | Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling upto half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20mm. thick layers of same mortar added with jute fiber at 1 Kilogram per bag including finishing the surface smooth with cement slurry admixed with approve dater proofing compound. Marking finished surface with false squares of 300mmx300mm. making the junctions at the parapet rounded and tapered top for required height,with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak proofness on Courtfee stamp paper of Rs.500/-including ponding test etc.complete. |
| 107 | Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharpedges wherever necessary, curing, etc.complete. |
| 108 | Providing and fixing M.S.grill door / window 24 Kilogram/One Square Metre of various size as per detailed drawings with out hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc |
| 109 | Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt and handle and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter Including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box |
| 110 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. |
| 111 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black /Amba White / Cat bary brown /RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement Moiler including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. |
| 112 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 113 | Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 114 | Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. |
| 115 | Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. |
| 116 | Providing and fixing mild steel grill gate with angle iron frame 65 mm x 65 mm x 10 mm with iron bars at 150 mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. |
| 117 | Add for elctrification |
| 118 | Sr No.03:- Improvement to Approach road at sarangkheda barrage.Clearing grass and removal of rubbish upto a distance 50 meters outside the periphery of area |
| 119 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. |
| 120 | Picking the road surface including sectioning etc. complete (WBM surface.) |
| 121 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means -Grading I(Using Screening Type B (11.2 mm) Aggregate) |
| 122 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II(Using Screening Type B (11.2 mm) Aggregate) |
| 123 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 124 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 125 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. |
| 126 | Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 1.75 kg/sqm, spreading 12mm.size chips compacting with static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates) |
| 127 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 128 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 129 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 130 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 131 | Sr No.04 Name of work :-Providing of Fencing at Sarangkheda & Takarkheda side And Provide Information sign boards as directed for Sarangkheda Barrage Tal Shahada Dist NandurbarProviding and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S. Angles (50 mm x 50 mm x 6 mm) at 2.5 metres centre to centre including excavating pits for foundation, fixing posts in cement concrete of size 45 x 45 x 45 cm, fastening the wire and painting the M.S. Angles with one coat of red lead primer and two coats of painting etc. complete. |
| 132 | Metal Beam Crash Barrier--Type-B,THRIE:Metal Beam Crash Barrier (Providing and erecting aThrie metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 85 cm above road/ ground level, fixed on ISMC series channel vertical post,150x75x5mm spaced 2 m centre to centre,2 m high with 1.15 m below ground level,al lsteel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367and IS:1364,metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546 mm long complete as per clause 810 |
| 133 | Providing and fixing road junction/ information sign boards of size 1.80 x 1.20 Meter Prepared 16 guage Alluminium sheet on frame of with angle iron frame of size40x40x5mm with cross bracing of size 35x35x5 mm including Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective cutout border & messages having pressure sensitive adhesive having border & messages in IRC Specified colour back ground including two angle iron post of size 65 x 65 x 6 mm of 3.65 m. long inflated at bottom drilled on top and painted in whiteand black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in- charge etc. complete. Alluminium sheet Type IV High Intensity Micro-Prismatic Grade Sheeting. |
| 134 | Providing and laying in situ cement concrete of grade M 20 of trap / granite / gneiss / quartzite / graded metal for RCC works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structures, intake structures, training walls, piers, abutments, slab etc. with Batching Plant and Transit mixer including centering, shuttering, scaffolding,compacting, curing etc. complete with all lifts etc.complete as directed |
| 135 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete as directed. |
| 136 | Sr No.05 :- Providing & Erecting 6 mtr octagonal Pole with Led Solar work Highmast at Sarangkheda Barrage.Supplying and erecting 20mm dia. corrugated flexible polypropylene conduit |
| 137 | Supplying and erecting PVC insulated PVC round sheathed FR 2.5 sq.mm (50 no. x 0.25mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV |
| 138 | Supplying and erecting Street light bracket for erection of side entry fitting on pole with 25 mm. dia. ‘B’ grade G.I. pipe of required length complete as per specification no. FG-BKT/SLB |
| 139 | Supplying, erecting, testing & commisioning metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc.including cutting, bending, drilling, welding, riveting, treated with anti-rusttreatment and painted with one coat of red lead paint and 2 coats of enamel paint or powder coating complete as per specification no. CP/SH/CR |
| 140 | Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 141 | Supplying, installing and testing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.I. Rod complete with all accessories of GI materials & recording the results as per specification no. EA-EP |
| 142 | Making M-20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal/ conical GI pole). |
| 143 | Supplying installing testing and commissioning of Solar Panel Comprising high efficiency poly-crystalline photovoltaic cell 250Wp 24V with necessary clamps and module frame on existing structure complete. Module Volt (V) 24 No.of cells in series 60 cell size(mm) 156.75 cell size tolerance+1% Module size (LxWxH) in mm-(1640x991x35) Voc(V)-37.1 Isc(A)-8.9 Pmax(W)=250 Vpm(V)-31.15 Ipm(A)-8.05 Efficiency (%)-15.4 Electrical tolerance(+%)-2 Temperature coefficient of open circuit voltage(beta)/*C-0.28% Temperature coefficient of short circuit current(alpha)/\\"C-0.005% Temperature coefficient of power (gamma)/\\"C-0.38% Nominal operating cell temperature-45°C +2°C operating temperature range from -40°C to +85°C Junction box connector IP68 Waterproof PPO and MC4 Compatible. Module weight (Kg) -20.(Non-CSR Item sanctioned by S.E PWD Elect. Mumbai Circle Vide Letter no. 3568 Dt. 02.08.2024. Est. no. 0155/2024-25) |
| 144 | Supplying installing testing and commissioning of Lifepo4 battery with capacity of 24V-78 Ah with 4S 15A BMS. Cell having duty cycle < 3000 suitable to charge lithium cell with necessary wiring connections. With IP 65 alluminium cabinel with stand and nut bolts complete (Nominal Voltage-24V. Nominal Capacity 75Ah. Stored Energy- 1.8Kw. Cycle 0.5C 80% DOC <3000 Charge Voltage 29.2 charge mode CCCV. Standard charge current- 15 amp. rapid charge current 37.5 standard discharge current-15 max charge current-75 amp. low voltage cutoff- 212. casing material Alluminium Terminal-MC4 connector.charge temp range-0-45C Discharge temperature range 20-55 C Storage temp- 20-45C. Weight 17K9. (5 Year Warrantee) (Non-CSR Item sanctioned by S.E. PWD Elect. Mumbai Circle Vide Letter no. 3568 Dr. 02.08.2024. Est. no. 0155/2024-25 |
| 145 | Supplying and erecting DC LEO Flood light fitting of 24V 25W including first 6 hr. full intensity light output and following 6 hr. with half intensity light output with lumen 3750 colour temp 5500K 6500K. colour redering index >70. PWM charge controller efficiency >90% LED drivet efficiency >90% Duty cycle first six hours 100%. Rest 50% light LED external optics 145X90 degree street light lens class IP 66. charge controller methodology-three stage battery charge Monitoring algorithm maximum charging current 20Amps short circuit protection battery over charge protections battery deep discharge protection solar panel dusk to dawn operation NTTV-4V. DTTV-6V battery low load disconnect voltage 22.4V battery full load disconnects voltage 26V battery constant voltage set point 29.4V LED Indication- green off battery not charging PV low green on battery charging green flashing battery full Red off. battery not discharge Red on Battery discharge load disconnect overall dimension- 255mm X 90mm X 60mm overall Weight-1Kg, and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete (5 Year Warrantee) (Non-CSR Item sanctioned by S.E. PWD Elect. Mumbai Circle Vide Letter no. 3568. Di. 02.08.2024. Est. no 0155/2024-25) |
| 146 | 1 % labour cess |
| 147 | Sr No.06:- Providing, fixing, installation, commissioning of IoT based data transmission system along with customized solutions & smart intelligent reconnaissance system with alternative power backup and smart intelligent interface connectivity etc. complete and also provide additional DG set at Sarangkheda Barrage.Providing, Fixing, Installation, Commissioning, Testing, Training & Maintaining Latest advanced Digital Transmission Control Protocol based Infrared, stationary Security Monitoring & Supervision devices with Original Equipment Manufacturer's (OEM) of branded companies alongwith CE, BIS & FCC certification for monitoring & supervision /reconnaissance of entrance & exit gates / roads & essential locations on dam site for security of different locations of dam site etc. complete. |
| 148 | Providing, Fixing, Installation, Commissioning, Testing, Training & Maintaining Latest advanced Digital Transmission Control Protocol based Infrared, stationary Security Monitoring & Supervision devices with Original Equipment Manufacturer's (OEM) of branded companies alongwith CE, BIS & FCC certification for monitoring & supervision /reconnaissance of entrance & exit gates / roads & essential locations on dam site for security of different locations of dam site etc. complete. |
| 149 | Providing, Fixing, Installation of Latest advanced Digital Transmission Control Protocol based 8Ch Network Video Recorder with Original Equipment Manufacturer's (OEM) of Matrix/Uniview/Wbox branded companies alongwith CE, BIS & FCC certification etc. complete |
| 150 | Providing, Fixing, Installation of high quality, latest & advance lan to media convertor Connection device with metal cover etc. Complete. |
| 151 | Providing, fixing & installation of high quality, latest & advance Industrial Grade, durable 5 V , 12 V , 24 V Dc to Buck & Boost Regulated Voltage Power Supply etc. Complete. |
| 152 | Splicing (making joints of optical fibre cable) of FR grade pvc armoured multimode armoured multimode optical fibre cable with the help Splicing machine etc. Complete. |
| 153 | Supplying and erecting 80Ah Lifepo4 (Lithium Ion) battery etc. Complete. |
| 154 | Providing, fixing & installation of high quality, latest & advance MPPT Solar Charge Controller etc. Complete |
| 155 | Providing, fixing & installation of class A, water resistant & durable, Ingress Protection 67, BIS compliant Solar panel etc. Complete |
| 156 | Providing, fixing & installation of water resistant, durable & weatherproof Solar stand etc. Complete. |
| 157 | Providing, fixing & installation of high quality, latest & advance Video Secure Outdoor Weatherproof Heavy Duty Aluminum Housing Mount Enclosure along with brackets & clamps etc. Complete. |
| 158 | Supplying, fixing, and configuring modularised multi-service router 802.11/a/n/ac unified Wave 2.5 GHz, with RJ-45 port, supporting 1 to 13 channels for 2.4 GHz, with unified wireless access point complete |
| 159 | Supplying and installing LSZH sheathed HDPE insulated copper cat-6A cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/casing-n-capping as per specification no. WG-ELVC/NC |
| 160 | Supplying and fixing 2 m 24 AWG multi stranded UTP patch cord with RJ-45 factory crimped connector of cat 6A type compliant ANSI/TIA-568.2-D standards in position as per specification no. WG-ELVC/PC |
| 161 | Supplying, fixing, and configuring 8-ports managed gigabit, Layer-2 switch, 10/100/1000 base-T, POE smart switch plus 2 SFP erected in provided rack complete. |
| 162 | Supplying, fixing, and configuring 10G Base -LR (SFP+) SM transceiver compliant with IEEE 802.3 standards erected in provided rack complete. |
| 163 | Supplying and plugging 3 m fibre patch cord LC-LC MM (50) OM3 LSZH duplex complete as per specification no. WG-COC/FPC |
| 164 | Supplying and fixing IP66 enclosure for fibre splicing complete |
| 165 | Supplying and erecting 5m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete. |
| 166 | Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 167 | Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With PVC accessories on wall /ceiling as per specification No: WG-MA/CON. |
| 168 | Supplying, installing, testing and commissioning of 800 VA to 900 VA Digital pure sine wave inverter based on Insulated Gate Bipolar Transistor (IGBT) technology single phase 230V,50 Hz complete as per specification no. AP-INV (Without batteries ) |
| 169 | Providing, fixing & installation of high quality, latest & advance LED light system with Motion detection control & multicolor LED lighting (Optional) for the work of - Providing, fixing, installation, commissioning of latest advanced specialised Wi-Fi /Wired Transmission control based security monitoring & supervision system with smart intelligent interface connectivity along with all required software, hardware, electronics, electrical, civil works & alternative power backup etc. |
| 170 | Providing required programming (customized / developed as per site requirement / in-built / on line Software) & Onetime Commissioning, testing & training (immediately after commissioning, for any number of persons) with skilled manpower, professional charges etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 29 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender