Tender For New Provision Of Lighting With Street Light Pole And Laying Of Underground Cables From Sravan Gudown To Mulagada To Comply Communist Party Of India Union Observations
Tender Value
29.53 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
9 days left
EMD
59061
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatnam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for New Provision Of Lighting With Street Light Pole And Laying Of Underground Cables From Sravan Gudown To Mulagada To Comply Communist Party Of India Union Observations
BOQ
| Sl. No. | Item Description |
| 1 | Fabrication, Transportation and supply of hot-dip galvanized Octagonal Street light Pole of height 9Mtrs. with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with Hinged door opening arrangement, including the supply of suitable boards to terminal two Nos. of 25Sq.mm Alluminium armoured cable on bakelite sheet and 2Amps MCB (MCB Make Schneider, Legrand, Siemens, Havells) as per IS specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs. Height pole having dimensions Bottom 155 mm,. Top 70mm with 3mm thick, base plate 260 x 260 x 16mm and 4 Nos of M24 x 750 long 'J' bolts along with template. Make: Bajaj / Valmont/Laasma/Transrail /Utkarsh |
| 2 | Foundation and erection charges with special T&P, for 9.00Mtrs long Octagonal pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtr x 0.60Mtrs x 1.40Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement and curing for 7 days as directed by the Engineer-in-charge during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc. |
| 3 | Fabrication, Transportation, Supply and Installation of 1.50 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe (Decorative type galvanised arm). Make: Bajaj / Valmont/Laasma/Transrail /Utkarsh |
| 4 | Supplying, installation, Testing & Commissioning of 120 Watt Street light LED fixture powder coated pressure die cast aluminium body, System lumen efficiency ≥135 lm/Watt with built in driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4352 Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, CCT 6500°K. Make: Philips / Bajaj / CG / Havells / K-Lite / Jaquar |
| 5 | Supply and transportation of 3 ½ C x 25 Sq.mm XLPE insulated, 1100V grade armoured aluminum conductor cable as per specification confirming to IS:7098 (Part - I)./1554-I complete as directed by Engineer-in-charge including all materials labour, tools and tackles.BRANDS: UNIVERSAL / UNICAB / GLOSTER / FINECAB / POLYCAB / KEI / RPG / FINOLEX / HAVELLS / V- GUARD / GLOSTER. |
| 6 | Excavation for cable trenches in Soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc. making the surface good to match with surroundings in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres. As directed by the Engineer-in-charge. |
| 7 | Excavation CC block road surface / CC / BT road with Pneumatic hammer Or JCB machine of required width and depth for laying of GI pipes, HDPE pipe , cables erection of BG /PSCC pole etc., and making of the surface good to match with surrounding as directed by engineer in charge and complete all labour and material Hard / dense soil |
| 8 | Supply and laying of 50 mm dia PE 100 grade(10Kg/cm2) HDPE pipe in the existing trench with all materials labour tools and tackles as directed by Engineer in charge. MAKE: TULASI / SUDHAKAR / NANDI. |
| 9 | Supplying, Installation, Testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 3 output (1output per phase) and suitable for three phase supplyMAKE: Kakatiya Energy Systems/KSP or Any Equivalent reputed make. |
| 10 | Supply and fabrication of steel by using suitable flats, angles, channels of required sizes to provide required cross arms, back clamps, support clamps, frames including cutting, bolting, riveting, drilling, welding etc. including providing one coat of zinc rich epoxy paint primer complete as directed by Engineer in charge. |
| 11 | Supply and providing of P.C.C. 1:3:6 with 20 mm graded granite as coarse aggregate and river sand as fine aggregate (220 Kgs of cement per M3 of finished concrete) including mixing, depositing in position, tamping, finishing and curing for base concreting etc. as directed by engineer in charge including all labour and tools. |
| 12 | Breaking of PCC and removing of debris as directed by Engineer in charge including all labour tools and tackles. |
| 13 | Removal and Relaying of existing CC Blocks for laying of cables, pipes etc. as directed by Engr. I/c with all labour tools and tackles. |
| 14 | Supply and providing Earth station with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. duly filling with alternative layers with charcoal/coke and salt as required as directed by engineer in charge including all labour and material. |
| 15 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) as directed by engineer in charge including all labour and material |
| 16 | Laying of one number 3 ½ Core, 25 Sq.mm PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required |
| 17 | Fixing Testing and commissioning of street light luminaires to the pole with 3 core x1.5 sq.mm Copper control cable as directed by Engr. I/c complete with all labour tools and tackles . Make of the cable : Torrent / Universal / Unicab / Havells / KEI/ Polycab / Gloster /orbit/ KSP/ Paragon/ RR Kabel/ RPGNote: Street light luminaires will be supplied by VPA Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender