Tender For special Repair To Boundary Wall, Hardstanding And Certain E/M Works Near Bldg No P-59 Under Ge Dehradun.
Tender Overview
Project Description
Tender for special Repair To Boundary Wall, Hardstanding And Certain E/M Works Near Bldg No P-59 Under Ge Dehradun.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition of Concrete in ground floors or above and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | M&L brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars incl demolition of old existing brick/stone work etc complete all as specified and directed. |
| 4 | M & L broken stone Hard core of gauge not exc 63 mm, deposited, spread, and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified directed. |
| 5 | M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed. |
| 6 | M&L Sand filling under floors or in foundations complete all as specified and as directed. |
| 7 | M&L for 60 mm thick pre polished rubber moulded coloured (Red/ Yellow) machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment including dismantling of existing PCC / tiles complete all as specified and as directed by the Engr-in-Charge. |
| 8 | M & L 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in leveling course to floors complete all as specified and directed. |
| 9 | M&L heavy duty endura ceramic coloured tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry @ 3kg/sqm and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 10 | M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete all as specified and directed. |
| 11 | M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for foundation / mass concrete complete all as specified and as directed by Engr-in-Charge. |
| 12 | M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4) finished surfaces even and smooth complete all as specified and as directed. |
| 13 | M & L 3mm thick wall care putty (in two layer 1.50mm each)on wall surfaces even and smooth complete all as specified and directed. |
| 14 | M&L for two coat of Plastic Emulsion paint over a coat of primer including preparation on new plastered surfaces of any description over 10 cm width or girth complete all as specified and directed. |
| 15 | Dismantling of Trellis work (Jafri), including taking down under battens in trellis (posts and rails measured separately) complete all as specified and directed. |
| 16 | Providing and fixing factory made 30 mm thick 100% solid WPC (wood Polymer composit) Jali, of required size comprising of virgin polymer of K value 58-60 (Suspension Grade) ,calcium carbonate and natural fibrs ( wood powder /rice husk/wheat husk) and non toxic additives made from extrution process WPC foam sheet Single extruded (inner) with having minimum density not less than 650 Kg/cum manufactured by certified company having good screw holding capacity (Screw withdrawal strength of 2000N (Face) & 1100N (Edge),minimum compressive strength 50N /mm2 and resistance to spread of flame of classA category with properties of being termite/borer proof,water/moisture proof and fire retardant. WPC jali to fixed with Stainless steel butt hinges (if Required)of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction by the Engineer -in-Charge. Material test cerfificate and authentication should be compulsory provided by the manufacture company. |
| 17 | Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder, light fitting any type and fan regulator etc and removing from site and making good disturbed surfaces of walls floors etc. complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
| 18 | Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder, light fitting any type and fan regulator etc and removing from site and making good disturbed surfaces of walls floors etc. complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender