Tender For Provn Of Internal Gi Pipes By Replacing Old Cpvc Pipes, Provn Of 02 × Solar Water Heater And Other Misc Works At Mh, 3 Naga, Birpur Under Ge Mes Dehradun.
Tender Value
43.20 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
16 days left
EMD
86400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Internal Gi Pipes By Replacing Old Cpvc Pipes, Provn Of 02 × Solar Water Heater And Other Misc Works At Mh, 3 Naga, Birpur Under Ge Mes Dehradun.
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Dismantling of 15/20/25/30/40/50/75/90/100/110/160 mm dia AC /cast iron or PVC pipes, jointed in CM and taking out etc complete all as specified and directed. |
| 3 | S & F spun soil waste pipe 75 mm bore in any length with or without ears with cement glands and fixed to wall with suitable clamps on wall complete all as specified and directed. |
| 4 | S & F spun iron soil waste pipe 100 mm bore in any length with or without ears with cement glands and fixed to wall with suitable clamps on wall complete all as specified and directed. |
| 5 | S & F spun iron 'P' trap or 'S' trap 100 mm size complete all as specified and directed. |
| 6 | S & F spun pipe for 100 mm bore Plain Bend complete all as specified and directed. |
| 7 | S & F spun iron for 75 mm bore plain bend complete all as specified and directed. |
| 8 | S & F spun iron for 100 mm bore of Bend with oval access doors complete all as specified and directed. |
| 9 | S & F spun iron for 75 mm bore of Bend with oval access doors complete all as specified and directed. |
| 10 | S & F spun iron for 100 mm bore of Tee with oval access doors complete all as specified and directed. |
| 11 | S & F spun iron for 75 mm bore of Tee with oval access doors complete all as specified and directed. |
| 12 | S & F spun iron cowls for 100 mm bore of pipe complete all as specified and directed. |
| 13 | S & F spun iron cowls for 75 mm bore of pipe complete all as specified and directed. |
| 14 | S & F in repair 100 mm spun iron sanitary connection socket to fit WC out let, complete all as specified and directed. |
| 15 | S & F spun iron floor trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggreate complete all as specified and directed. |
| 16 | S & F spun iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggreate complete all as specified and directed. |
| 17 | S & F in repair Salt-glazed stone gully Trap square or Round mouth of size 150x150 mm type 'P' fixed with PCC 1:2:4 type B-0 using 20 mm graded stone aggregate complete all as specified and directed. |
| 18 | S & F in repair PVC gully Trap square or Round mouth of size 150x150 mm type 'P' fixed with PCC 1:2:4 type B-0 using 20 mm graded stone aggregate complete all as specified and directed. |
| 19 | S & F in repair FRP Squre Manhole cover with frame of size 300x 300 (5 MT) havey Duty , anti corrosive, non rusting with suitable load bering capacity fixed with PCC 1:2:4 type B-0 using 20 mm graded stone aggregate in proper position complete all as specified and directed. |
| 20 | S&F 160 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches/ wall etc with PVC clamp and holder bats complete all as specified and directed. |
| 21 | S&F in repairs PVC (SWR) bend of dia 160mm complete all as specified and directed. |
| 22 | Supplying, fixing, jointing and testing 15 mm galvanised iron tube, medium grade with all fitting fixed to walls and ceiling or laid in complete all as specified and directed. |
| 23 | Supplying, fixing, jointing and testing 20 mm galvanised iron tube, medium grade with all fitting fixed to walls and ceiling or laid in complete all as specified and directed. |
| 24 | Supplying, fixing, jointing and testing 25 mm galvanised iron tube, medium grade with all fitting fixed to walls and ceiling or laid in complete all as specified and directed. |
| 25 | Supplying, fixing, jointing and testing 32 mm galvanised iron tube, medium grade with all fitting fixed to walls and ceiling or laid in complete all as specified and directed. |
| 26 | Supplying, fixing, jointing and testing 40 mm galvanised iron tube, medium grade with all fitting fixed to walls and ceiling or laid in complete all as specified and directed. |
| 27 | Supplying, fixing, jointing and testing 50 mm galvanised iron tube, medium grade with all fitting fixed to walls and ceiling or laid in complete all as specified and directed |
| 28 | S&F 15 mm dia gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 29 | S&F 20 mm dia gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 30 | S&F 32 mm dia gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 31 | S&F 40 mm dia gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 32 | S&F 50 mm dia gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 33 | Cutting existing steel tubing for alteration or additions as in 15/20 mm dia pipe complete all as specified and directed. |
| 34 | Cutting existing steel tubing for alteration or additions as in 25/32 mm dia pipe complete all as specified and directed. |
| 35 | Cutting existing steel tubing for alteration or additions as in 40/50 mm dia pipe complete all as specified and directed. |
| 36 | Taking down chowkhats or frames n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 37 | All as per 35 here in above but exc. 1.5 Sqm but not exceeding 4 Sqm each |
| 38 | S&F factory made 100 % solid wood plastic composite (WPC) door frame 50x75 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity complete all as specified and directed. |
| 39 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. |
| 40 | S&F stainless steel barrel tower bolts 150 mm long one piece and fixed complete all as specified and directed. |
| 41 | S&F stainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame, complete all as specified and directed. |
| 42 | S&F stainless steel handles 150 mm long one piece and fixed with screws/welded to frame, complete all as specified and directed. |
| 43 | S&F 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete all as specified and directed. |
| 44 | M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring benching to drain, coping, etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed. |
| 45 | M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement ncluding demolition of existing cement concrete and removing to out of defence land complete all as specified and directed complete all as specified and directed. |
| 46 | M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc ncluding demolition of existing cement concrete and removing to out of defence land complete all as specified and directed. |
| 47 | M&L cement concrete type E2 1:5:10 (40 mm graded agg) filling in sunken floor complete and including demolition of existing cement concrete and removing to out of defence land complete all as specified and directed. |
| 48 | M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 300 mm x 300 mm x6- 7 mm thick in floor, set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 49 | M&L glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified |
| 50 | Material and labour for double Charge Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile n.exc exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of tiles complete all as specified and directed. |
| 51 | M&L 18 to 20 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite ncluding dismantling of stone complete all as specified and directed. |
| 52 | M&L for Pre polished concrete tiles 30cm x 30cm x 22 mm thick , machine pressed set, jointed and pointed in neat cement slurry @ 3.00 Kg/Sqm in floors with grey cement and no pigment and cut and polished including 20mm thick screed bed in CM (1:6) complete including dismantling of stone complete all as specified and directed. |
| 53 | Material and labour for 20 - 25 mm thick machine cut Kota stone slab as in flooring over 15 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry @ 3.00 Kg/Sqm mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish including dismantling of tiles complete all as specified and directed. |
| 54 | S & F pre-painted galvatume aluminium zinc coating GI based corrugated steel 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 55 | S&F 3 mm thick High Quality Polycarbonet sheet solid as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 56 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, post, pipes; fixed with angle cleats or other connecting plates Fe-290 (Gde E-165 complete all as specified and directed |
| 57 | M&L applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed. |
| 58 | S & F in repair, Vitreous China wash down water closet pan (Pedestal Pattern in one-piece unit) 700 x 365 x 770 mm and Dual Siphonic flushing cistern (PVC), flat bottom, white including white plastic seat cover with mild steel CP hinging device, with suitable CP wash jet with 1.00 to 1.50m long tube fixed in repair incl making connection to inlet flush pipe and incl supply of 'P' or 'S' trap with extra long arm complete and making good the disturbed portion etc. all as specified and directed. |
| 59 | S&F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed. |
| 60 | S&F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc complete all as specified and directed. |
| 61 | S&F in repair half stall china urinals (wall type) complete incl plugs,bedding urinal to plugs with and incl 60 mm long screws,pointing around urinal back in cement and waste pipe etc complete all as specified and directed. |
| 62 | S&F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed. |
| 63 | S&F in repair, sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long complete all as specified and directed by Engineer-in-Charge. |
| 64 | S&F CP towel rack 600 mm long complete all as specified and directed and approved by Engr-in-Charge. |
| 65 | S&F CP Health Faucet with 1.20 mtr metalic Expandable tube & hook complete all as specified and directed. |
| 66 | S&F brass CP WHB Mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair complete all as specified and directed. |
| 67 | S&F Brass CP Bath Mixer for screwed down for iron pipe and fixed in repair, complete all as specified and directed. |
| 68 | S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. |
| 69 | S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 70 | S&F in repair 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 71 | S&F in repair CP grating 100mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed. |
| 72 | S&F in repair looking mirror in size (450 X 600mm) mounted on decorative type PVC frame fixed to wooden plug with CP brackets screw fixed, complete all as specified and directed. |
| 73 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc half but n exc full brick wall complete all as specified and directed. |
| 74 | M&L brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of existing old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 75 | M&L brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall including demolition of existing brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed. |
| 76 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 77 | M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and fair complete all as specified and directed. |
| 78 | M & L 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface, surface finished even and fair complete all as specified and directed. |
| 79 | M&L for 5mm thick rendering on fair faces of concrete surfaces in CM 1:3 finished rendering surfaces even and smooth (without using extra cement) complete all as specified and directed. |
| 80 | Supply only integral water proofing compound complete all as specified and directed. |
| 81 | M&L for preparation of wall and applying interior grade wall care putty 1 mm thick to make the surface smooth complete all as specified and directed. |
| 82 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified in SSR Part I and directed by Engr-in-Charge. |
| 83 | M & L for two coat of Damp Proof paint in any tint on Newly plastered surfaces of walls complete all as specified by Engineer-in-Charge. Note: Work will be carried out up to 5th Storey. |
| 84 | M & L for one coat of Damp Proof paint in any tint on old plastered surfaces of walls complete all as specified by Engineer-in-Charge. Note: Work will be carried out up to 5th Storey. |
| 85 | M&L complete removal of old existing treatment on wall plastered or unplastered surfaces of walls over 1 mm thickness plaster of wall putty after preperation of surface including,two coat of oil bound distemper on wall complete all as specified and directed. |
| 86 | M&L complete removal of old existing treatment on wall plastered or unplastered surfaces of walls over 1 mm thickness plaster of wall putty after preperation of surface including,two coat of Damp Proof paint on wall complete all as specified and directed. |
| 87 | M & L for red brick tiles (clay tiles) of 10-12 mm thick size 15 x 5 to 7.5 cm as in vertical surfaces such as wall dado's etc over 15 mm thick rendering CM (1:4) set and jointed in approved tiles adhesives /Epoxy Adhesive slurry and pointed in Colured Epoxy to match the existing surfaces of tile complete all as specified and directed. ( Note: The work will be carried upto Fifth storey building the rate of scaffolding included for this item also and including dismantling of old tiles complete and removing debries outside the premises as directed by Engr in charge the work carried out in Patches , the tiles fixed with tiles adhesives /Epoxy Adhesive as per approved make) Work will be carried out up to 5th Storey. |
| 88 | Cleaning of existing covered / uncovered (partly / semi or fully filled up) drain, of any opening width and depth by removing and re-fixing of cover-slab (wherever applicable) taking out accumulated silt, mud, earth, rubbish, vegetation etc from the drain and removing the same at a distance exceeding 500 metre but not exceeding 1 Kilometre where directed, washing of the drain with water complete all as directed by the Engineer-in-Charge. |
| 89 | Cleaning of floor traps by any means and removing the sludge out side the MOD land complete all as specified and directed by Engineer-in-Charge |
| 90 | Cleaning of gully traps by any means and removing the sludge out side the MOD land complete all as specified and directed by Engineer-in-Charge . |
| 91 | Cleaning urinals by any means and removing blockage and removing sludge/silt out side of MOD land complete all as specified and directed by Engineer-in-Charge. |
| 92 | Cleaning the existing man holes of any size upto 1.5 Mtr depth by removing the sludge/foul by any means & removing the sludge and deposited where directed and flushing the man holes with clear water complete all as specified and directed by Engineer-in-charge. |
| 93 | M & L for cutting around the pipe 75/110 mm bore waste pipe soil pipe including taking out plants roots up to any depth in brick masonery and rejounting in pipe joint in epoxt mortar ( Asain/Berger) and making good to existing surface all as directed by Engr-in charge ( After the jointing pipe one week to open for chacking of leakage including scaffolding) complete all as spcified and directed. |
| 94 | M & L cleaning of inaccesible areaa of roof including perapet walls upto 0.50 metre hight removal of vegetation growth including uprooting if required applying two coat of tartariv acid and repair to broken/ chipped off plastered surfaces with cement mortar 1:4 finished fair and even including necessary ladder/scaffolding complete all as specified and directed. |
| 95 | M & L cleaning of outer surface of down take pipes any type treating minor leakages at joints, clearing of vegetation, scraping of algae growth with wire brush, chipping of damaged plaster at the joints (area not exc 0.50 Sqm) and making good with cement mortar 1:4 duly mixed liquid water proofing compound @200 m/ per 50 kg bag of cement and applying one coat of tartaric acid on dry finished plaster surface including necessary ladder / scaffolding complete all as specified and directed. Please Enable Macros to View BoQ information |
| 96 | M & L cleaning of outer surface of down take pipes any type treating minor leakages at joints, clearing of vegetation, scraping of algae growth with wire brush, chipping of damaged plaster at the joints (area not exc 0.50 Sqm) and making good with cement mortar 1:4 duly mixed liquid water proofing compound @200 m/ per 50 kg bag of cement and applying one coat of tartaric acid on dry finished plaster surface including necessary ladder / scaffolding complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender