Tender For special Repair For Conversion Of Oh Electric Lines Into Ug Network At 42 Inf Bde, special Repair Of Sewerage Line Etc Under Ge Dehradun.
Tender Value
47.22 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
15 days left
EMD
94500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair For Conversion Of Oh Electric Lines Into Ug Network At 42 Inf Bde, special Repair Of Sewerage Line Etc Under Ge Dehradun.
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Supply and Laying XLPE insulated galvanised steel strip or wire armoured elctric power cable with stranded aluminium conductor 1100 V grade of size 300 sqmm 3.5 core after cutting to required length with necessary glands, nuts, bolts, and lugs complete all as specified and directedNotes:(a) Excavation, returning, removal, sand cushioning, cable protection covers, GI protection pipe etc shall be measured and paid separately.(b) Any damage done during cable excavation to the existing UG infra like UG pipelines, UG electric cables, OFC etc shall be repaired by the contractor at their own expenses.(c) Cost of T&P required for handling/ laying of cable is deemed to be included in the rate quoted by the contractor. |
| 3 | All as per item No 1 here-in-above but XLPE cable of size 120 sqmm 3.5 core |
| 4 | All as per item No 1 here-in-above but XLPE cable of size 95 sqmm 3.5 core |
| 5 | All as per item No 1 here-in-above but XLPE cable of size 50 sqmm 3.5 core |
| 6 | All as per item No 1 here-in-above but XLPE cable of size 35 Sqmm 3.5 Core |
| 7 | All as per item No 1 here-in-above but XLPE cable of size 25 Sqmm 4 Core |
| 8 | All as per item No 1 here-in-above but XLPE cable of size 16 Sqmm 4 Core |
| 9 | M&L for GI tubing light grade (ISI marked) of size 40mm dia with all fitting/acessories for protection of cable on pole/wall and under road crossing including clamps, nut bolt etc incl taking down existing pipe complete all as specified and directed. |
| 10 | S&F tube 'Light' grade galvanised of 80 mm dia with all fitting laid in trenches, fixed to wall and floor for cable protection incl taking down existing pipe complete all as specified and directed. |
| 11 | Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including three core copper wire and PVC conduit to connection light to Junction box and thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 12 | S&F junction box made of glass fibre reinforced and transparent poly carbonate of size 126x228x111, KV PC 8104 with IP 65 protection including MCB SP, 6 Amps 1 No and suitable size clamps fixing for pole/in PCC foundation etc,including taking down the old one, complete all as specified and directed. |
| 13 | Supply, install, testing & Commissioning of Timer Panel switch comprising of nature switch smart timer for automatic operating of street lights suitably mounted on street light pole comprising of suitable power contractor and incmoing & outgoing MCB complete with SMC enclosure conforming to IP -54 for an operating electric load of 20 Amps per phase for three phase controlling of street light incl taking down existing old one complete all as specified and directed. |
| 14 | Supply, Installation, commissioning & testing of factory made CPRI approved, LT switch gear panel board, IP-54 (outdoor type), 415 volts, 50 Hz, AC supply, three phase and neutral (4 wire), 800 Amps aluminium busbars 4 pole, duly insulated with heat shrinkable sleeve as per colour code supported on epoxy insulatators, having independent compartment for insulated busbar, incoming feeder & each outgoing feeder i.e. cubicle type, made out of 3.00 mm thick CRCA sheet and 2mm thick inner enclosure CRCA sheet, rigid mild steel angle iron frame of 50x50x6mm with 900mm long extended legs grouting in PCC 1:3:6 type C2 block of size 1000x300x600mm, duly epoxy powder coated internally & externally with approved shade, rubber gasket, hinged front & back openable doors with proper locking arrangements for dust and vermin proof, complete including suitable size cable alley, lugs, cable glands, common earth bar of GI strip 32x6mm at bottom and making connections with MCCB spreaders/wiring with suitable size of single core PVC copper conductor cable, locking arrangements 65mm size and lock with keys, earth work and excavation comprising the following ; Incoming :- (a) MCCB 630 Amps 4P, 35 KA, Adjustable thermal & fixed magnetic setting, Ics=100% of Icu with spreader link - 01 Nos., Meter set : Digital voltmeter,Ammeter + CT : 400/5, RYB indicating Lamp LED type 240 V, MCB SP 6A, 800 Amp Alluminium Bus Bar Outgoing :- (a) MCCB 250 Amp FP, 25 KA, Adj tharmal & fixed magnetic setting,Ics=100% of Icu with spreader link - 02 Nos. (b) MCCB 63 Amp FP,16 KA, Adj thermal & fixed magnetic setting, Ics=100% of Icu with spreader link - 03 Nos. |
| 15 | All as per item No.13 here-in before but with following switch gears : Incoming :- (a) 400 Amps 4P, 35 KA , Adjustable tharmal & fixed magnetic setting, Ics=100% of Icu with spreader link - 01 Nos. (b) Meter set : Digital voltmeter, Ammeter + CT : 400/5, RYB Indicating Lamp LED type 240 V, MCB SP 6A, 600 Amp Alluminium Bus Bar Outgoing :- (a) MCCB 250 Amp FP,25 KA,,Adj tharmal & fixed magnetic setting,Ics=100% of Icu with spreader link - 01 Nos. (b) MCCB 160 Amp FP,25 KA,,Adj tharmal & fixed magnetic setting,Ics=100% of Icu with spreader link - 02 Nos. (c) MCCB 100 Amp FP,16 KA,Adj tharmal & fixed magnetic setting, Ics=100% of Icu with spreader link - 02 Nos |
| 16 | M&L and installation Bus bar, factory fabricated bus bar chamber out door pedestal type made out of 2.0 mm thick CRCA sheet siz 750x500x400mm duly painted with powder coating, simens grey /RAL fitted with four Nos aluminium bus bar of capacity 400 Amps duly mounted epoxy insulator , cable connections of incoming and outgoing cables duly insulated PVC heat shrinkable sleeve 1.1 KV grade including one No MCCB 250 Amps , 04 pole , 50 KA , with adjustable thermal stetting Ics=100% Icu, including glands c/p lugs etc including 50x50x6mm angle iron frame 450mm height above ground level and 450mm below ground level , angle iron frame shall be embeded in PCC (1:2:4) type B 1 block of size 200x200x200mm complete all as specified and directed. |
| 17 | M&L for earthing complete with GI or steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI earth wire 4 Sqmm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth wire protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation and earth work & connecting the earthing to an earthing test point /transformer nuetral/body/ Lt panel etc. and testing on completion, complete all as specified & directed by Engr-in-Charge. |
| 18 | Dismantling of ACSR or AAC conductors of any type or size and depositing to MES store for further disposal complete all as specified & directed by Engr-in-Charge. |
| 19 | Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unseviceable LT Cable for laying of cable and getting out complete all as specified and directed. |
| 20 | Sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified and directed. |
| 21 | Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in hard /loose soil complete all as specified and directed by Engr-In-Charge. |
| 22 | Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified. |
| 23 | M&L for brick well burnt Class ‘B’ as cover to U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches all as specified and directed by Engineer-in-Charge. |
| 24 | M&L for Cutting existing road/hardstand of any type by using crow bar chisel uprto a depthof 30 cm for laying GI pipe including making good the surface by returning filling watering ramming in layers 150 mm thick PCC 1:2:4 over 200 mm thick hard core of broken bricks/stones over returning filling watering ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge. |
| 25 | Dismantling cross arms of MS channel or angle section etc complete and setting aside complete all as specified and directed. |
| 26 | Dismantling insulators any type, any size complete all as specified and directed. |
| 27 | Taking out old unserviceable LT cable of any size or type or make from ground / poles / pipes etc complete all as specified and directed. |
| 28 | Supplying and laying reinforced precast concrete cable cover, class EHV, type 1 with peak, size 250mm x 150mm x 40mm complete all as specified and directed. |
| 29 | Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) 200mm bore set in cement mortar complete all as specified and directed. |
| 30 | Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete)1 50mm bore set in cement mortar complete all as specified and directed. |
| 31 | M&L for PCC (1:4:8) type D-2 (using 20 mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe complete all as specified and directed. |
| 32 | Ditto as per item No 30 above but for 150 mm bore of pipe |
| 33 | S&F 200 mm Salt glazed stoneware drain pipes, grade ‘A’ laid to slope in trenches and jointed in CM 1:1 including testing for ensuring leak proof complete all as specified and diirected |
| 34 | Ditto as per item No 32 above but for 150 mm bore of pipe |
| 35 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 36 | M&L for 60 mm thick vibromatic reinforced precast cement concrete 1:2:4 (using 20mm graded stone aggregate) with 1mm thick mild steel CR sheet around painted with 2 coats of bituminous paint , as in man hole cover slabs finish fair even and smooth without using extra cement ( Top surface will be chequred finish) including necessary form work, 100 mm long handle of 12mm dia round bar counter sunk by 25mm welded to reinforcement complete all as specified and directed by Engr-in-charge Note : CA No and date will be engraved on covers. Reinforcement shall be measured and paid saperately. Curing will be carried out with ponding method. |
| 37 | S&F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 38 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 39 | M&L brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 40 | Ditto all as per item No 38 above but except bricks |
| 41 | Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 42 | M&L for 15 mm thick rendering with WPC in cement mortar 1:4 on brick work or concrete , surface finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately. |
| 43 | Supply only integral water proofing compound etc complete all as specified and directed. |
| 44 | M&L for Cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed. |
| 45 | M&L for PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in surface channels and drains complete all as specified and directed. |
| 46 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms,moulds, mitred/stop ends etc complete all as specified and directed. |
| 47 | Cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed. |
| 48 | Cutting into existing manholes for connecting new drains 200mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed. |
| 49 | M & L for cutting of road including sub base during repairing /replacement of sewage line and making good surface to match with existing road surface after repair/replacment of sewage line etc complete all as specified and directed. |
| 50 | M&L for construction of Soakage wells, excavation in any type of soil, foundation in PCC 1:3:6 , walls of honey combed massonry with top ring of M25 concrete including intercepting chamber and screen chamber made of bricks masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.40 m dia x 3.00 m of effective depth 3 mtr complete all as specified and directed and shown on Drawing No TD-309 Sheet 1/4 to 4/4. |
| 51 | Note : Tenderers may note that amount of credit Rs 61,650.00 will be deducted from the total amount arrived, at the time of Acceptance of contract. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender