Tender For Construction Of Two Class Room School Building,At-Govt Ps Pundi
Tender Value
21.76 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
0 days left
EMD
44000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gumla → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Two Class Room School Building,At-Govt Ps Pundi
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Earth work in excavation of foundation trenches in ordinary soil (vide classification of soil item -A ) and disposal of excavated earth as obtained to a distance up to 50 M. including all lift , leveling ramming the foundation trenches , removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I |
| 3 | Extra for earth work in hard soil (vide classification of soil –B) all complete as per specification and direction of E/l. |
| 4 | Filling in foundation trenches and plinth in layers not exceeding 150mm thick well-watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50M and lift of 1.5M all complete job as per specification and direction of E/I |
| 5 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l. (Mode of measurement compacted volume) |
| 6 | Providing designation 75A one brick flat soling in foundation, joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:3:6 (1 cement: 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement :1.5 coarse sand (zone-iii) :3 graded stone aggregate 20mm nominal size) |
| 9 | Reinforcement cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement :1.5 coarse sand (zone-iii) :3 graded stone aggregate 20mm nominal size) |
| 10 | Reinforcement cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases. above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement :1.5 coarse sand (zone-iii) :3 graded stone aggregate 20mm nominal size) |
| 11 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 12 | Providing Tor steel reinforcement of 8mm dia rods as per approved design & drawing (TMT Fe 500 only valid for SAIL & TATA Steel) |
| 13 | Providing Tor steel reinforcement of 10mm dia rods as per approved design & drawing (TMT Fe 500 only valid for SAIL & TATA Steel) |
| 14 | Providing Tor steel reinforcement of 12 to 20 mm dia rods as per approved design & drawing (TMT Fe 500 only valid for SAIL & TATA Steel) |
| 15 | Providing and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape placed in position and fixed in R.C.C slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by dept.) |
| 16 | Providing cantering and shuttering including strutting propping etc. and its removal after use in foundation work as per specification and direction of E/I |
| 17 | Foundations, footings, bases for columns, etc for mass concrete |
| 18 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 19 | Column suspended floors, roofs, landings, balconies and access platform |
| 20 | Suspended floors, roof, landings, balconies and access platform |
| 21 | Weather shade, Chajjas, corbels etc., including edges |
| 22 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:4) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 23 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 24 | Supplying, fitting and fixing 20 gauge G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 25 | Supplying, fitting and fixing MS grill made of 20x6mm MS flat as per approved design and drawing properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site hoisting as per building specification and direction of E/l. (where materials is not supplied by the dept.) |
| 26 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20x10x2mm at 100mm centers and braced with M.S. flat diagonals 20x3mm with top and bottom rails of T. iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage, hoisting and taxes all complete as per building specification and direction of E/l. |
| 27 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 28 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 29 | Providing and laying Double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. |
| 30 | Providing and applying white cement-based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 31 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding curing and taxes all complete as per building specification and direction of E/l. |
| 32 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 33 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly specification and taxes all complete as per building specification and direction of E/l. |
| 34 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand including finishing the top smooth |
| 35 | Carriage of Materials: - |
| 36 | i) Bricks (10 Km) |
| 37 | ii) Sand (lead 10 Km) |
| 38 | iii) Stone Chips lead 30 KM |
| 39 | iv) Stone Metal lead 30.00 KM |
| 40 | iv) Cement +Steel (lead 10 Km) |
| 41 | Wiring for light point / fan point / call bell point/with 1.5 Sq.mm F.R.P.V.C. insulated copper conductor cable in surface/ recessed PVC conduit as required with piano type switch phenolic laminated sheet MS box earthing the point PVC insulated copper with 1.5 Sq mm FR PVC insulated copper conductor single core cable etc. as required |
| 42 | Group A |
| 43 | Wiring for light power plug wiring with 2x4 Sq. mm. PVC insulated copper conductor single core cable in surface /recessed PVC conduit along with 1 no 4 Sq mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 44 | wiring for circuit / sub main wiring along with earth wire with the following sizes of P.V.C. insulated copper conductor single core cable in surface / recessed PVC conduit as required. |
| 45 | 2 x 1.5 sq mm + 1 x 1.5sq mm earth wire |
| 46 | 2 x 2.5 sq mm + 1 x 2.5sq mm earth wire |
| 47 | 2 x 6 sq mm + 1 x6sq mm earth wire |
| 48 | Supplying and fixing PVC/GI Box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required |
| 49 | 75 mm x 75mm x 50 mm deep |
| 50 | Supplying and fixing following piano type switch/ socket on the existing switch box / cover including connection etc as required |
| 51 | 5/6 Amps switch |
| 52 | 5/6 Amps socket outlet |
| 53 | 15/16 Amps switch |
| 54 | 6pin15/16 socket outlet |
| 55 | Supplying and fixing Suitable size G.I. box on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing5 ping 5/6 & 5/6 Amps socket outlet and 15/16 amps piano type switch , connection, painting etc as required |
| 56 | Supplying and fixing (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 ping 5/6 & 15/16 Amps socket outlet and 15/16 amps piano type switch , connection, painting etc as required |
| 57 | S/F Batten/ angle holder including connection etc as required |
| 58 | Supplying and fixing of following way single pole & natural sheet steel. MCB distribution board 240volts , on surface /recess, complete with tinned copper bush bars, natural link, earth bar, din bar, detachable gland plate , interconnection, phosphatized and powder painted including earthling etc. as required etc. ( but without MCB/RCCB / .ISOLATOR) |
| 59 | 4 WAY |
| 60 | Supplying and fixing 6 Amps to 32 Amps rating, 240 volts, 'B' series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connection, testing and commissioning etc. as required. |
| 61 | 6/32 single pole |
| 62 | 40amps single pole |
| 63 | Supplying and fixing 20amps 240 volts SPN industrial type socket outlet with 2pole and earth metal enclosed plug top along with 20amps C-series .SP MCB in sheet steel enclosure, on surface or in recess with chained metal cover for the socket outlet and complete. etc required |
| 64 | Supplying and fixing 40amps 240 volts TPN industrial type socket outlet with 4pole and earth metal enclosed plug top along with 20amps C-series. TP MCB DB in sheet steel enclosure, on surface or in recess with chained metal cover for the socket outlet and complete. etc required |
| 65 | Annexure (B) Fitting and Fixing |
| 66 | Supplying and fixing of holder type 15/16 watt LED Bulb |
| 67 | Supplying fitting and fixing of 1200mm Ceiling fan |
| 68 | Supplying fitting and fixing of 60-watt LED Street Light |
| 69 | GST @18% |
| 70 | LABOURCESS @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender