Tender For Deposit Estimate For Shifting Of 1- Phase L.T. Line Passing Over The Land Of Sh. Abhishek & Shifting Of 3-Phase L.T. Line Passing Over The Premises Of Sh. Kalu Ram In (E) Section Local & Tikken Under Esd, Hpsebl,Barot.
Tender Value
1.20 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
0 days left
EMD
1210
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Deposit Estimate For Shifting Of 1- Phase L.T. Line Passing Over The Land Of Sh. Abhishek & Shifting Of 3-Phase L.T. Line Passing Over The Premises Of Sh. Kalu Ram In (E) Section Local & Tikken Under Esd, Hpsebl,Barot.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantalling of Conductor (30 mm²) for L.T.Line (1 PH LT Line):- Removel of conductor, de-stringing & removal from insulator Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc. |
| 2 | Dismantalling of Conductor (50/55 mm²) for L.T.Line (3 PH LT Line):- Removel of conductor, de-stringing & removal from insulator Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc. |
| 3 | Dismantalling of G.I.Wire (8 SWG):- Removel of GI wire, de-stringing & removal from insulator Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc. |
| 4 | Erection of Steel Tubular Pole L.T.:- Digging of Pit , Drilling of holes in Pole X-Arm , Erection of Pole , Erection of X-Arm , Shackle Insulator,Painting of Pole and Filling of Pit and Ramming Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc. |
| 5 | Erection of L.T.Stay Set.:- Digging of Pit , Fixing of Stay road ,Nozzeling & tightening Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc. |
| 6 | Sagging of Conductor (30 mm²) (1 PH LT Line):- Laying of Conductor , Stringing and Sagging and Binding with Insulator Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc. |
| 7 | Sagging of Conductor (50/55 mm²) (1 PH to 3 PH LT Line):- Laying of Conductor , Stringing and Sagging and Binding with Insulator Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc. |
| 8 | Sagging of Conductor (50/55 mm²) (3 PH LT Line):- Laying of Conductor , Stringing and Sagging and Binding with Insulator Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc. |
| 9 | Sagging of G.I.Wire (8 SWG):- Laying of G.I.Wire,Stringing and Sagging and Binding with Insulator Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc. |
| 10 | Manual carriage of material like Pole & other allied materials |
| 11 | Loading, unloading & transportation charges |
| 12 | Supply Part LT :- Prov.Steel Tubular Poles 8 m Long |
| 13 | Prov.AAAC 7/3.15mm2 |
| 14 | Providing RCC Pipe (Muff) ISI marked suitable for different size of Steel Poles 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanised M.S Wire of 12 SWG Rings and 6 mm M.S Round in vertical directon conforming to IS 458-1988 or latest version if any including filling of cavity between Pre-cast muff and Pole 9 Mtrs. long with cement conc 1:2: 4 ( 1 cement :2 sand 4 graded stone aggregate of 20 mm nominal size) with its all associate material including all type off carriage with in all type lead and other incidental risk etc. Independent piers Coloumn and Pliiars upto floor to level . |
| 15 | Providing D - Shackle Assembly,D-Iron made of 50X 6mm M.S.Flat suitable for 3\\" X 3.5\\" Shackle insulator having three holes, One in each side suitable for use with 16 mm bolt.D-Iron to be painted with superior quality Black Japan paint.The size of D-Iron will be 125X75mm .The weight of D-Iron should not be less than 750 grams,Shackle insulator size of 3\\" X3.50\\" and Nut & bolt size of 12 mm X 125 mm, to fix the shackle insulator on D-iron. and Shackle Insulator (16 KN) Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc. |
| 16 | Providing Earth Knob conforming to the latest version of IS:9511-1980.) including all types of lead lift and other incidental Etc. |
| 17 | Providing L.T. Stay set made of M.S. round 1600 mm in length and 16 mm dia having threaded up to 300 mm on one end with one nut and one check nut to aviod slippage and an eye of 40 mm dia on other side and welded confirming to REC specification. Elbow made of M. S Channel Iron 75 x 40x 6 mm, 250 mm long and M.S Round 16 mm dia, vertical height 300 mm, both ends bend after putting in two holes in Channel Iron taking the ends out 25 mm minimum in length and welded with Channel iron one anchor of Angle Iron 65 x 65x6 mm,750 mm in length with one hole of 20 mm dia in the centre including gay assembly .The complete stay set shall be painted with superior quality black Japan paint.with Stay hook Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc. |
| 18 | Providing Stay 7/3.15 SWG wire of superior Quality as staisfication of Engineer-in-Charge i/c all type of lead,lifts and other incidentals for stay set as required |
| 19 | Prov. Full clamp for L.T.Stay Set Complete in all respects as directed by Engineer-In-Charge including all types of lead lift and other incidental Etc. |
| 20 | Providing G.I.Wire 8 SWG of superior Quality as staisfication of Engineer-in-Charge i/c all type of lead,lifts and other incidentals for continuous earth and guarding as required |
| 21 | Providing Nuts & Bolts of various Sizes(Galvanised/Coated) Preferably 16 mm dia or more (With flat and Spring Washer) |
| 22 | Providing alluminium Paint of superior quality including all type of carrige with in all type of lead, lift and other incidentals situation complete in all respect for painting of Steel Tubular Pole 8 Mtrs Long |
| 23 | Prov. Spiral PVC Spacer of superior Quality as staisfication of Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender