Tender For maintenance of Road (Construction And Beautification Of Footpath On Udyog Marg From Golchakar To Sector-11 T-Point), Noida
Tender Value
6.60 Crore
Estimated cost
Bid Submission
29 Jul 2026
2 days left
EMD
13.20 Lakhs
Bank guarantee accepted
Document Fee
8260
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance of Road (Construction And Beautification Of Footpath On Udyog Marg From Golchakar To Sector-11 T-Point), Noida
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas in foundation trenches or drains (exceding30cm in depth 1.5m in width or 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m, and lift upto 1.5m, as directed by Engineer-in- charge: All kinds of soil. (C.R.) The Contractor has to detect Different utilities like sewer line, water Supply line, electric cable, telephone cable, gas pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of Engineer-in- Charge(CR) |
| 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -all work upto plinth level 1:4::8 (1cement :4 course sand (zone III ):8 graded stone aggregate 40mm nominal size ). |
| 5 | Earth work embankment in ordinary soil embankmentto be in 20cm Layers including ramming, dressing, the surface to required levels with ½ tonne steel or wooden rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 to 10 tonnes capacity and including 1.5 m lift and all lead. Earth shall be brought from a place which including cartage of earth by mechanical transport and T& P , Labour etc. required for proper completion. Earth shall be Arranged by the contractor at his own cost |
| 6 | Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impaining strength and durability as per direction of the Engineer-in-charge. (Note Cement content considered in this item is @ 330kg/cum.Excess/less cement used as per design mix is payable/recoverable separately). |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Providing and laying factory made Cement concrete Brick pavers blocks in Footpath, park, lawns, drive ways or light traffic parking etc. of required strength, thickness & size / shape required colour & pattern over 50mm thick compacted bed of sand, laying of brick paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per requird size , finishing and sweeping extra sand. complete all as per direction of engineer- in charge 80mm thick cement concrete brick paver block of M-35 grade with approved colour, design & pattern. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for :Wall any thickness including attached pilasters, buttresses, plinth and string course etc. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete |
| 11 | SS BOLLARDS Providing and fixing FB 900 Diameter of fixed bollard cylinder with height 900 mm diameter 100 mm , thickness 4-5mm impact load 30 TN , Material should be of high strength stainless steel 304 tube , for corrosion protection , with reflective strep and light indication installation |
| 12 | Providing wall putty on new surface with approved quality material of Berger/JK/Birla of similar make 2 coats |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 14 | Providing and fixing of Saucer Drain of size 600x300x100 mm ( along the sides) in PCC (1:1½:3) complete and provide proper slopes to drain of rain water on the top of drain including all lead lifts etc complete for the finished item of work as per the directions of Engineer-in-Charge. Note: (No separate measurements will be considered for the excavation ) |
| 15 | Providing and laying Tactile tile (for vision impaired person as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS :15622 of approved make in all colours and shadesin for outdoor floors such as Footpath, Court yard, Multi modals location etc. laid on 20mm thick base of cement mortar 1:4 (1cement : 4coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-charge. |
| 16 | Supply and fixing 90x90x80 mm cobbal stone block hand cut andchisel dressed on top for paying in floors, drams etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc complete as per direction of engineer-in-charge. |
| 17 | Providing and laying o 500x500x40 mm thick turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, Including spreading. well ramming consolldating & finishing smooth etc, All complete as per direction of Engineer -in-charge |
| 18 | Providing and laying Non Pressure NP-2 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 250 mm dia. R.C.C. pipe |
| 19 | M-150 Brick Work in 1:4 Cement & Fine Sand 2.20 F.M. mortar in foundation and plinth including supply of all materials, labour and T& P etc. requred for proper completion of the work. |
| 20 | 12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand ). |
| 21 | Neat Cement Punning |
| 22 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 23 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved |
| 24 | Providing and laying in position cement concrete of specific grade excluding the cost of centering and shuttering : All work up to plinth level : 1:2:4( 1 Cement : 2 Coarse sand(zone-iii) : 4 graded stone aggregate 20mm nominal size) |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and accessplatform |
| 26 | FRP catch basin grating cover (600x600mm size 2.5tonne load capacity) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 15, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender